Sentences with phrase «apply wood glue»

A) Apply wood glue to the top of the base, and clamp the top to the base and attach with finish nails.

You would still need to sand it a bit to try to smooth it out first, then apply the wood glue over it.

Apply wood glue to the surface of each frame.

Once you have cut your diagonal board, apply your wood glue and place on your door.

Apply wood glue to the last 1/2 inch of one bamboo slat.

Now lift the table base slightly to apply wood glue inside the traced area.

Apply wood glue between the hat and the head.

Apply wood glue between the brim and the hat.

At the tongue and groove of each plank, I liberally applied wood glue.

I arranged the pieces using a square and this time I applied wood glue and nailed the support pieces to the back of the sign.

Then I applied wood glue along each board edge and connected the boards together using 2 1/2 ″ Kreg screws.

Not exact matches

He applied a generous amount of wood glue in the channel and laid the first piece of spline in place.

Following a long career in photography, Lebreton revealed the encaustic and started applying it onto his photographs that were previously developed and glued on wood.

Just to specify when you are talking about applying to wood floors, did you mean for the glue mixture... 3 parts water to 1 part glue or visa versa?

Since you've already done a dry fit for the pieces, just apply an even, yet somewhat light amount of glue to the backing, use a glue spreader or plastic scraper of some sort (or even scrap wood) to spread the glue out evenly.

Apply a generous coating of hot glue to the top of the painted wood plaque, and then affix the completed fabric pincushion to the top of the circle, pressing firmly to ensure all portions of the pincushion are adhered to the wood piece.

After that, apply the glue in the cut wood and set the sofa console table in the back position.

You can see how sometimes the wood glue, if not applied evenly, will ooze out.

Wood glue is what will really be holding your stool together, so before nailing on each piece be sure to apply a thin line of wood glue to each one first.

Apply a bead of wood glue to the surface of each frame.

Apply a bead of wood glue to the exposed back of the trim pieces.

After applying wood filler to some of the missing veneer and wood gluing the legs back together, I painted it with Annie Sloan Coco (love that color) and waxed it with Minwax clear wax.

Apply a thin layer of liquid nails or wood glue on the back of the board and nail 1-1/4 ″ finish nails into the corners and / or studs.

Before nailing in the rungs, apply a little bit of wood glue on each end.

Apply a bead of wood glue to inside of dado.

For additional support, wood glue can be applied in - between all the wood joints where screws are used.

Once your star is cut out attach the 1 × 2 frame using wood glue and clamp or apply weight and allow to dry for 24 hours.