Sentences with phrase «bluetooth pairing mode»

For the first time you will need to tap and hold the smart button to enter the Bluetooth pairing mode then start the YU Fit app and follow the steps.

All of this is made even easier thanks to the in - line remote control that can skip tracks, engage Siri or Google Voice, and activate a Bluetooth pairing mode.

Say «Alexa, pair» to put your Echo device in Bluetooth Pairing mode.

This indicates the controller is in Bluetooth pairing mode.

To wirelessly connect your PlayStation 4 controller with a PC without any additional hardware, you'll need to put it in Bluetooth pairing mode.

To put the unit into Bluetooth pairing mode, you hold down the small button next to the power button on the end of the speaker.

Pressing the two front buttons down for a couple seconds will make a little light on the pen flash and it will enter Bluetooth pairing mode.

For example, you touch and hold the play / pause button to turn the earbuds on and off, but you also have to touch and hold the same button to put the earbuds in Bluetooth pairing mode.

The bottom of the case has a single Lightning port for charging and on the back there's a button to enter Bluetooth pairing mode on non-Apple devices.

You'll need to put your car's stereo or dashboard system into Bluetooth pairing mode, then navigate to Settings > Bluetooth on your iPhone.

Simply put your device in Bluetooth Pairing mode, push and hold the button on top of the speaker, and pairing is done within moments.

Not exact matches

The base Sportage LX trim will get a 5 - inch touch - screen display that is paired with rearview camera, USB input, Bluetooth wireless connectivity, 6 - speaker, the drive - mode selector (Sport, Normal, Eco), and automatic headlights.

Available options on the 2017 Chevrolet Colorado ZR2 will include: Class - exclusive 2.8 L Duramax Turbo - Diesel engine, paired with a six - speed automatic transmission, capable of 186 horsepower and 369 lb - ft of torque Choice of crew - or extended cab configurations (including short and long beds, respectively) 7 - speaker Bose premium audio system Dealer - installed, bed - mounted spare tire carrier Full - length black vinyl floor (no additional cost — standard interior features leather seats and carpet) The ZR2's starting MSRP includes a number of key standard features unique to the trim level, such as: Class - exclusive front and rear locking electronic differentials Revolutionary, segment - exclusive Multimatic Dynamic Suspensions Spool Valve (DSSVTM) dampers Off - road rocker protection Modified front and rear bumpers for better off - road obstacle clearance Exclusive ZR2 17 x 8 - inch aluminum alloy wheels 31 - inch Goodyear Wrangler Duratrac off - road tires New cast - iron control arms An aluminum skidplate that protects the radiator and engine oil pan Autotrac transfer case Transfer case shield Aggressive grille and hood combo unique to ZR2 Modified rear axle with a 3.42 ratio Front and rear tracks widened 3.5 inches over a standard Colorado Suspension lifted 2 inches over a standard Colorado Off - Road Mode Technology 4 - wheel disc brakes Other standard features include: Tow / haul mode Trailering Package, including trailer hitch and 7 - pin connector Integrated trailer brake controller Spray - on bedliner Heated driver and passenger front seats Wireless phone charging Rear sliding window EZ Lift and Lower tailgate Locking tailgate Recovery hooks A six - speaker audio system with Chevrolet MyLink Radio with Navigation and an 8 - inch diagonal color touchscreen, AM / FM stereo with seek - and - scan and a digital clock, Bluetooth streaming audio for music and select phones, voice - activated technology for radio and phone featuring Apple CarPlay and Android Auto capability as well as an auxiliary jack All - terrain spare tire with unique ZR2 wheel Four USB ports: one on the instrument panel, one in the center console and two in the rear of the center console Electronic automatic cruise control Rear window electric defogger OnStar 4G LTE with built - in Wi - Fi Rear Vision Camera Remote keyless entry Remote vehicle starter system 4 - way power front driver and passenger seat adjuster with power driver lumbar control Rear seats with underseat storage Standard powertrain is the 3.6 L DI DOHC V6 with a class - leading 308 horsepower and 275 lb - ft of torque that is shared with other Colorado models.

The instruction manual, with its hilarious smattering of Engrish, will walk you through all the «combos» needed to boot the NES30 up in different modes — joystick, Bluetooth keyboard, iCade, emu - touchscreen, USB joystick, and even a Wiimote emulation mode (available after you update the firmware via 8Bitdo's website)-- in order to successfully pair up with your platform of choice.

With your console powered up, pairing the Retro Receiver with a Bluetooth - compatible wireless controller just requires you to push the single red button on the front of the adapter once the controller has been put into its own pairing mode.

Do not operate Bluetooth devices in Mode 1 and ensure discovery mode is enabled only when necessary to pair trusted devices;

Subsequent device pairing requires you to hold down the Bluetooth button on the back for about 5 seconds to initiate pairing mode.

Just put the controller into pairing mode, open the Settings app on your iPhone or iPad, and select Bluetooth.

If you have a wireless Bluetooth controller, you can pair it with your Android device by putting the controller into pairing mode.

This screen will display a list of nearby Bluetooth devices that are in discovery mode as well as devices paired to the device.

Amplify your sound stage as you broadcast your playlist from a pair of these Bluetooth speakers, or use them in stereo mode to enjoy a true wireless stereo experience.

With the speaker itself in pairing mode, tap the «Pair Bluetooth Speaker» button on your phone.

The only solution is to open settings on the iPad, «forget» the Folio, turn off Bluetooth, turn off the Folio then turn on the folio and put it into pairing mode, turn on Bluetooth on the iPad, chose the Zagg Folio and pair it.

To get started with your multi-room audio set up, make sure your Bluetooth speaker is powered on and in pairing mode.

You first have to hold a button inside the case to put the Pixel buds in pairing mode and from there, enter the Bluetooth settings on your smartphone and connect them the old fashion way.

The speaker only goes into pairing mode if you turn it on and it can't find the device with which it was previously paired; in other words, if you pair it with your phone, then want to pair it with your tablet, you have to turn off your phone's Bluetooth to put the Anker back into pairing mode.

If your device doesn't immediately appear, make sure a device you've previously paired with your speaker (like your iPhone) has Bluetooth turned off — many devices will immediately reconnect to any nearby previously paired device is possible, skipping the pairing mode altogether.

To enter Bluetooth - pairing mode, press the Xbox button to turn the controller on, and then hold the sync button on the top of the controller for three seconds.4 We had no problems playing over Bluetooth during our testing, but there are some caveats: Your PC needs to be running the Windows 10 Anniversary Update or newer, Microsoft says only one Xbox One controller can be connected via Bluetooth at a time, and the controller's headset jack doesn't work.

From left to right, the speaker features a power button with an LED to indicate battery status, a Bluetooth pairing button and a switch for auxiliary mode.

Here you can connect to WiFi and Bluetooth, pick themes for your home screen and clock, schedule night mode, adjust the brightness, set different volumes for different alerts like alarms and notifications, rename the device, set the date and time, toggle the camera on or off, and even pair Alexa - compatible gadgets.

First, put your Bluetooth speaker or adapter into pairing mode.

In order for your Android phone or tablet to view the controller listed as a possible Bluetooth connection, you will need to use a button combination on the PS4 DualShock 4 wireless controller to access pairing mode.

Turn on your Bluetooth speaker and make sure it's in pairing mode (press the pairing button on your speaker, if possible).

Blueborne «virus» can connect with your phone without the need of pairing the phone with another malicious app, and it can also by - pass «discoverable mode» from your Bluetooth settings.

You slide the power slider all the way to the right to put the headphones in pairing mode, and then you simply select them from your phone or laptop's Bluetooth menu.

The pairing button serves two functions: a single push puts the Tap into Bluetooth - pairing mode.

To pair, put your Bluetooth device into discovery mode and enable Bluetooth on your PC from the audio settings.

To put the speaker into pairing mode, you press the Bluetooth button until the indicator light blinks blue and red.

A pleasant British woman will tell you that the single «bud is both on and in pairing mode, and then all you have to do is pair the Muse 5 in your device's Bluetooth menu.

Then, turn on your Bluetooth keyboard and put it into pairing mode.

Also, earpiece mode doesn't work when a Bluetooth device is paired, and the call might drop if you decide to switch from Bluetooth to the speaker or vice versa.

From here, you'll need to act quickly, since most Bluetooth accessories will automatically leave pairing mode after about 60 seconds.

Sliding the power / Bluetooth button downward for 2 seconds places the cans in pairing mode.

To put it into pairing mode, you hold down the Bluetooth button until you hear the speaker say, «Ready to pair.»

Once they selected this option they can enter the Home into pairing mode and then head over to their phone's Bluetooth settings to add it, just like they would any other speaker.

Just place a Bluetooth device in pairing mode near your PC and you'll see a notification asking you to pair it, so you won't even have to open the Settings app and navigate to Bluetooth settings.

You'll have to put that Bluetooth speaker into pairing mode, then you simply follow the instructions in the app.

Pairing the speaker with a Bluetooth - capable mobile device is a very simple and process — just press the Bluetooth button on the speaker to put it in discoverable mode, and choose the Melody from your device's Bluetooth connection menu.

The catch is the iPhone must be paired with the dock in Bluetooth mode.

Designed for comfort, this stylish, laser mouse offers dual - mode wireless for fast switching between Dell Universal Pairing and Bluetooth LE.