Sentences with phrase «cars manufactured after»

Cars manufactured after June 1998 are equipped with the revised airbag design.

Cars manufactured after 1970 tend to have either disc brakes on all four wheels or disc brakes in the front and drum brakes in the rear.

All VIN numbers for cars manufactured after 1981 should consist of 17 characters (there are a few exceptions) and should not contain the letters O, Q or I.

Most cars manufactured after 1998 come with one wheel bearing in each tire, called a hub and bearing assembly.

All cars manufactured after 2002 are required to have two lower anchors in the backseat at the intersection of the seat back and cushion and several anchors at the top of the car's seat.

To take a step back, UBI programs (also known as telematics and pay - as - you - go insurance) rely on a small device plugged into the OBDII (or OBD - 2) port located on the dash or under the steering wheels of cars manufactured after 1998.

Not exact matches

After a decade of rapid growth in both capacity to manufacture autos and in sales, China now has the capacity to make more cars than its own domestic market can support.

Tesla coaxed Model 3 production to 2,270 cars per week in April, the electric automaker confirmed today, after CEO Elon Musk took drastic steps to boost manufacturing.

Fleet Tracker OBD - plug and play, CDMA GPS tracker, passenger cars and light duty trucks manufactured after 1996.

The sticker CMVSS 213 or 213.1 must appear on the car seat and the car seat must be manufactured after 1981.

The majority of vehicles and car seats manufactured after 2002 have the LATCH system as a feature.

Any convertible car seat manufactured after that date of September 1, 2002, can be installed using LATCH.

A car that was manufactured after September 1, 2002, will be compatible with a LATCH installation.

Most cars and car seats manufactured after 2002 must have lower anchors and tethers to attach the child seat to the vehicle.

LATCH is required on car seats and in most vehicles manufactured on or after Sept. 1, 2002, to make car seat installations easier.

The expiration date varies between manufacturers and car seats but it is typically 6 to 9 years after the date of manufacture.

Because cars and car seats manufactured after September 1, 2002 are LATCH compatible, you are likely to have the choice of these two installation methods.

Abingdon's One And A Half — Jonathan Wood recalls the VA the smallest of the three saloons made by MG towards the end of the»30s / Pau: A Popular Revival — The inaugural Grand Prix Historique contained all the ingredients for lasting success reports Douglas Blain / Bellows To Buses — Norman Painting relates how a West Midlands general engineer became a diversified vehicle producer but lost the plot after the First World War / Maudslay's Might - Have - Beens — Concluding Nick Baldwin's account of the early years of the Maudslay Motor Co. / Japanese Microcars — Michael Worthington - Williams recalls some amazing light cars and microcars produced up to the 1950s when Japan was far from the successful motor manufacturing nation it is today / Phantom a La Packard — This month the Editor tries out a Phantom II whose dual cowl bodywork was modelled on a Packard phaeton.

Whenever I buy a new car I change the oil and filter after the first 100 miles — concerns for impurities, metal filings from manufacture, etc. and I get 200K + miles out of these engines with no problems But I am reading in some of the forums that this might not be a good idea, in fact it might be a bad idea.

All 2000 and later Maxima and I30 / I35 models manufactured after November 1999 include structural and airbag modifications to improve occupant protection in frontal crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

After the brand ended production of the Nissan Stanza in 1992, the 1993 model year saw the introduction of the Nissan Altima The Nissan Altima was, and still is, completely manufactured in the U.S. Like its predecessor, it was classed as a compact car.

Beginning with 2010 models manufactured after December 2009, structural reinforcements were added to the underbody and the frontal airbags were modified to improve occupant protection in frontal offset crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

Beginning with 2006 models manufactured after August 2005, changes were made to the front seat - mounted torso airbags to ensure better abdomen coverage in side impact crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

The tested car was manufactured after the side torso airbags had been modified.

All 9 - 3 models manufactured after December 1998 include structural changes to improve occupant protection in frontal crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

Tires generally should not be left in service on a car for more than 10 years after the date of manufacture molded onto the tire sidewall.

If a used car is what you are after we have a large inventory from some of today's top manufactures.

All 2006 and later Azera models manufactured after April 2006 include roof and floor structural upgrades and side airbag changes to improve occupant protection in side - impact crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

Beginning with 2006 models manufactured after June 2006, design changes were made to the rear door structure and trim to improve occupant protection in side impact crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

I bought the Rogue 2016 two months ago in Koppel Nissan in Queens NY, after the first two weeks the car started with a noise in front and back then I brought the car to the dealer and they told me that this Nissan Rogue has a manufacturing defects, more that two weeks and I'm still waiting for a call to fix the problem.

Beginning with 2005 models manufactured after February 2005, changes were made to the vehicle side structure and to the optional side torso airbags to improve occupant protection in side impact crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

Starting with 2009 models manufactured after May 2009, the side curtain airbags of the 2 - door models were modified to improve occupant protection in side - impact crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

All 2002 and later 9 - 5 models manufactured after November 2001 also include airbag modifications to further improve occupant protection (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

The car was reengineered and restyled during the 2005 model year so that 2005 models manufactured after October 2004 include structural changes to improve occupant protection in side impact crashes.

The model bill defines a street rod as an altered vehicle manufactured before 1949 and a custom car as an altered vehicle at least 25 years old and manufactured after 1948.

Beginning with 2013 models built after December 2012, the side curtain airbags were reprogrammed to deploy in small overlap frontal crashes to further improve occupant protection (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

The Ministry of Road Transport has announced that airbags, reverse parking sensors, high speed alert and manual override for central locking system will have to be compulsory for all cars manufactured on or after 1st October 2017.

It was the first car released by Bentley under Volkswagen AG management, after the company's acquisition in 1998, and the first Bentley to employ mass production manufacturing techniques.

Beginning with 2005 and later Escape, Tribute, and Mariner models manufactured after August 2004, front seat - mounted torso airbags were added to the optional front and rear head curtains (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

All RAV4 models manufactured after December 2003 also include structural changes to improve occupant protection in frontal offset crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

All 2001 and later RAV4 models manufactured after October 2000 include structural and airbag modifications to improve occupant protection in frontal offset crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

Almost a year ago plus a couple days, the National Highway Traffic Safety Administration (NHTSA) put forth a requirement through its parent organization, the US Department of Transportation, that all cars manufactured on or after May 1, 2018 be sold in the US with a backup camera as standard equipment.

Beginning with 2013 models built after April 2013, Toyota made additional changes to better control the stability of the steering column and to provide extra padding under the footwell carpeting (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

Beginning with 2008 models manufactured after February 2008, design changes were made to the front door trim panels to improve occupant protection in side impact crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

With both cars soon gone and the Dodge Viper ending production after the 2017 model year, all of FCA's U.S. - based operations will manufacture pickups and SUVs.

All 2004 and later Malibu models manufactured after February 2004 include front door trim panel changes to improve occupant protection in side - impact crashes in cars equipped with optional side airbags (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

Both cars were manufactured after all design changes for 2006 had been made.

The car has a very spacious interior, including powered front seats, as well as a strong, reliable automatic transmission, featuring overdrive and a power mode, and a V6 engine capable of producing over 100 horsepower even twenty years after the car's manufacture date.

Beginning with 2006 models manufactured after December 2005, further changes including additional B - pillar reinforcements, a modified roof structure, side curtain airbag updates, and modified door trim panels were made to improve occupant protection in side impact crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).

Also beginning with 2006 models manufactured after November 2005, the vehicle floor was reinforced to improve occupant protection in side impact crashes (note: information about when a specific vehicle was manufactured is on the certification label typically affixed to the car on or near the driver door).