Sentences with phrase «coupled torsion»

Suspension of this variant consists of McPherson strut, while the rear suspension is equipped with efficient coupled torsion beam axle.

Improved ride comfort, handling and stability are achieved through Elantra's redesigned rear suspension geometry that modifies the angle of the rear shock absorbers and changed the position of the coil springs on the coupled torsion beam axle.

New Generation i20 sits on fully - independent MacPherson strut suspension at the front and semi-independent coupled torsion beam axle at the rear.

With its 106.3 - inch wheelbase, two inches longer than the outgoing model, the all - new Forte rides on a McPherson strut front suspension and a coupled torsion beam rear axle.

Hyundai's engineers have also upgraded the suspension, taking out the coupled torsion beam setup from the base car and replacing it with a more capable multilink apparatus with a stabilizer bar.

The Coupled Torsion Beam Axle at the rear is stiffer therefore reducing under - steer and the strength of the connection between the trailing - arms and the stub - axles is doubled, improving stability.

The rear suspension is a lightweight coupled torsion beam rear design for enhanced steering stability and monotube shock absorbers for ride comfort and control.

Semi-independent coupled torsion beam axle with separate coil springs and gas - filled shock absorbers.

Not exact matches

The car's MacPherson struts suspension at the front and the semi-independent setup coupled with torsion beam axle at the rear have been tweaked for sportier performance.

At the same time, the front axle is assembled with a McPherson strut and rear axle gets coupled with a torsion beam.

Honda says the new Jazz rest on a more rigid and lighter chassis, coupled with a re-engineered suspension system: MacPherson struts for the front axle and an H - type torsion beam bar for the rear axle.

Honda's RC149 GP motorcycle of 1966 used a 125 cc straight 5 engine which was configured like a straight six with one of the middle cylinders missing; this eliminated any rocking couple (and reduced crank torsion due to piston inertia, ideal at the high engine speeds it would be run at) whilst leaving free forces equivalent to a 25 cc single cylinder of similar construction.

Couple hundred pounds, getting rid of the underpowered IMA engine, having an independent rear instead of a torsion beam.