A new high - pressure injection system and continuously - controlled variable oil pump reduce
friction losses in the engine, with the lower powered 110 ps version available across both the standard cee'd and new GT Line range.
To reduce
friction loss in the engine, pistons in the 1.8 litre engine have a molybdenum treatment applied in a polka - dot pattern.
Not exact matches
Their portfolio simulation approach: (1) is restricted to the technology, industrials, health care, financials and basic materials sectors; (2) assumes an extreme sentiment day for a stock has at least four novel news items (prior to 3:30 PM
in New York) and is among the top 5 % of average daily positive or negative events; (3) makes portfolio changes at market close; (4) holds positions for 20 days, subject to a 5 % stop -
loss rule and a 20 % take - profit rule; (5) constrains any one position to 15 % of portfolio value; and, (6) assumes round - trip trading
friction of 0.25 %.
In fact, the sum of the momentum vectors of the two balls after the collision is equal to the first ball's momentum vector before the collision, ignoring small
losses due to
friction as well as sound and heat energy produced during the impact.
Athletes first absorb and then release kinetic energy
in each ground contact phase, supplementing it only to make up for the
losses of energy to
friction and for any inefficiency
in the system.
The power
losses in a MT are primarily do to
friction.
In all modes, the Golf reduces
friction losses by decoupling the motor from the one - speed transmission and «sailing» whenever you lift off the pedal.
Then add
in variations for, embedding
loss, thermal cycling and preload variation due to
friction.
I never could figure out, and no one has offered anything intelligent, to explain how the two speed front works with the seven speed rear - seems to me there's some serious
friction losses and wear
in front.
Infiniti says the variable combustion ratio mechanisms and related hardware increases VC - T engine's weight by about 22 lb compared with a regular inline 4, and that
friction losses are similar to those
in a four - cylinder engine with a balance shaft.
Traffic regulations
in a large number of countries require trucks to always drive with an engaged gear, which
in turn provides a certain amount of engine braking (viscous
losses to the engine oil and air pumped through the engine and
friction losses to the cylinder walls and bearings) when no accelerator pedal is applied.
DCTs are more efficient because their helical gears (
in place of a conventional automatic's planetary gears) create lower hydraulic and
friction losses.
In 2H mode, the road friction losses are minimized to allow maximum fuel economy and is also the ideal mode for urban driving in fine weathe
In 2H mode, the road
friction losses are minimized to allow maximum fuel economy and is also the ideal mode for urban driving
in fine weathe
in fine weather.
Internal
friction losses have been reduced to a minimum and innovative technologies have been employed (such as the multi-spark ignition function which implements three successive sparks of different intensity and duration) to reduce fuel consumption by 30 per cent compared to the 599 GTB Fiorano depsite the increase
in power and torque.
In the manual transmission - equipped 86, this engine reduces
friction and pumping
loss, helping to provide an optimized power curve.
The low -
friction design of the brake calipers reduces energy
losses when the brakes are not
in use, directly improving fuel efficiency.
Only two clutches are open at a time
in each gear, thus reducing
friction losses to a minimum under all conditions and
in every situation.
Gears
in drive lines produce
friction losses and are to be avoided if possible.
Subaru claims a 28 - percent reduction
in friction losses, mainly due to lighter pistons and connecting rods.
Specially designed grooves on the
friction material which are integrated into the
friction lining for oil flow and cooling provide very low
losses at the clutch
in the open state, enable high transmission efficiency and smooth shifting capability while increasing fuel economy.
Wheel lockup can result
in longer stopping distances,
loss of steering control and, when road
friction is uneven,
loss of stability if the vehicle begins to spin.
While the compact combustion chamber and higher compression ratio on gasoline engine helps to improve engine efficiency, the advanced thermal management system
in diesel engine along with low
friction engine oil and modified fuel injection system help diesel engine
in faster warm up and lower frictional
losses.
This engine produces 170 hp and 175 lb - ft of torque — a carryover from the outgoing model — with the latest version of the CVT achieving a 40 percent reduction
in friction loss, as well as gaining a wider gear ratio and greater efficiency compared to earlier units.
The available RDX All - Wheel Drive (AWD) system is designed to help maximize the use of available traction
in both dry and slippery conditions, while minimizing system - wide
friction and power
loss to help optimize fuel efficiency.
Hyundai says the «mistakes» occurred during what is called the «coastdown» phase of emission and fuel economy testing,
in which aerodynamics, tire resistance, and internal power
losses due to
friction are measured through a dynamometer.
Those help generate a 30 percent reduction
in engine
friction loss, Subaru said.
In EV Drive operation, when the battery - powered drive motor is used for either acceleration or regenerative braking, a clutch disengages the stopped gasoline engine from the drivetrain to eliminate efficiency loss from mechanical friction in the engin
In EV Drive operation, when the battery - powered drive motor is used for either acceleration or regenerative braking, a clutch disengages the stopped gasoline engine from the drivetrain to eliminate efficiency
loss from mechanical
friction in the engin
in the engine.
Testing showed that this can occur if the mats are moved forward from the clipped position approximately two inches into a position
in which the rear edge of the mats will abut the retention clip (s) when installed singly and align with the clip (s) when stacked on another floor mat.The pedal interference incidents reviewed by the Office of Defects Investigation (ODI) include 1 crash and 9 incidents with allegations of brake
friction materials smoking and / or requiring repair for heat related damage.The crash incident occurred after the parking brake was applied at speed, resulting
in loss - of - control vehicle yaw event caused by lock - up of the rear tires.The spin - out resulted
in a side impact collision with an oncoming vehicle
in an opposing lane of traffic.
So we economize on the use of water by using low cost drip irrigation application systems, and creating breakthroughs
in lowering filter
friction, pipe
friction, and pump energy
losses through a system design approach
in which each component contributes optimally to the efficiency and affordability of the total system.
OK, so again: ASIDE from all
losses and mechanical
frictions etc., etc., expended
in displacing horizontally without gaining or losing potential gravitational energy, there is a NEW CONDITION with the moved mass.
Make sure that your car tyres have the right air pressure because overinflating tyres reduces the area of contact with the road, resulting
in loss of rolling
friction on wet surfaces.