Running in anger requires the car to be fitted with high - performance brake pads, lightweight
racing wheels fitted with Pirelli racing compound tires, a performance exhaust system and a Nismo - engineered suspension.
A new set of 18 - inch Rimstock Pro
Race wheels fitted with Yokohama Advan Sport tires is available as well as privacy glass and a new stainless steel exhaust system.
Not exact matches
A full
racing dashboard, OMP seat and quick - release steering
wheel, and a safety harness have been
fitted in the cabin.
This impression is further enhanced by the standard -
fit six - speed sequential gearbox, which drives the rear
wheels through a
racing - specification paddle - clutch.
Despite the supple Can Can Red leather inside, there was no question about this car's
racing pedigree with its heavily cambered
wheels, full roll cage (trimmed in leather on this car), air jack pneumatic
fitting, tow hook, and electric safety shut - off switch.
All
wheel sets — for example with rim design «Edition
Race», HAMANN
fits with tyres S1 EVO of its technology partner HANKOOK.
Fitted with reinforced tires, the Range Rover Sport took on the demanding course with Panasonic Jaguar
Racing's Ho - Pin Tung behind the
wheel and the Terrain Response ® 2 system in Dynamic mode.1
Factory 17 ″
Racing Hart
wheels were
fitted with new Yokohma S - Drive tires in March 2017.
The Advanti
Racing B2 DENARO BLACK
wheels is also offered in many different fitments, finishes, and sizes so finding a set of Advanti
Wheels to
fit your ride will be simple.
The Advanti
Racing PO PRODIGO BLACK
wheels is also offered in many different fitments, finishes, and sizes so finding a set of Advanti
Wheels to
fit your ride will be simple.
The Advanti
Racing BO BELLO MATTE BLACK
wheels is also offered in many different fitments, finishes, and sizes so finding a set of Advanti
Wheels to
fit your ride will be simple.
The interior, stuffed with a multifunction steering
wheel and a plethora of buttons, looks
fit for endurance
racing, though that's about where the similarities with other
race - inspired interiors ends.
The Advanti
Racing A2 KUDOS MATTE BLACK
wheels is also offered in many different fitments, finishes, and sizes so finding a set of Advanti
Wheels to
fit your ride will be simple.
Torque Keith Craft Stroker Engine Tremec TKO 600 5 - Speed Transmission 750 Holley Carb Vacuum Secondaries Edelbrock Intake MSD Distributer Air conditioning PIAA and Hella Fog Lights Suspension: 3.70 Posi Traction Rear End Koni Shocks Maier
Racing Rear Suspension Brakes: Power Front - Wilwood Disc Brakes Rear - Wilwood Disc Brakes Wheels and Tires Front Wheels: 17» GT40 Rear Wheels: 17» GT40 Front Tires: 245 / 40ZR17 Rear Tires: 285 / 40R17 Underneath: - Tank is New - 3» Exhaust - Shocks are New - Borla Mufflers - Frame Ties look Good - Ground effects look Good - Parking Brake Hooked Up - Custom Headers - Drilled and Slotted Rotors - After Market Suspension - Rack and Pinion Steering - Sway Bar Links - Tubular Lower Control Arms - Inner
Wheel House looks Great - Floor Boards are Solid - Rocker Moldings are Solid Body: - Maier
Racing Body Kit - Custom Metal Fabrication - After Market Head Lights - Chrome Bumper looks Great - Hood Pins look Good - Grille
Fits Nicely - Rockers are Solid - Fiber Glass in Great Shape - Hood Lines Up Well - Paint is Phenomenal - Doors Operate Nicely - Door Handles are Clean - Shelby Style Tail Lights - Trunk Opens Smoothly - Trunk Finished Nicely - Trunk Floor is Solid - Back of Quarters are Solid - Bottom of Deck Lid looks Great - Rubber in Great Condition Interior: - Door Panel looks Great - Door Lips are Clean - Rubber looks Good - Carpet is Clean - Racecar Pedals - Center Console in Good Shape - 5 Speed Shifter - Eleanor Wood Steering
Wheel in Great Shape - Roll Bar - Shoulder Belts - JBL Speakers - Upholstery looks Amazing - Front and Rear Seat Belts - Fold Down Backseat - Head Liner in Good Condition - Rear Window Trim looks Good - Sun Visors look Good - After Market Gauges - Dash Pad in Good Shape - Gauges Work - Gas Gauge Works Don't miss out!
BBS
racing wheels with center - nut attachment are
fitted with Michelin
racing tires.
The chassis of the DS3 has been thoroughly reworked to ensure that the DS3
Racing will go around corners as well as it goes in a straight line, with the suspension lowered, the track widened, 18 inch alloy
wheels fitted, the springs stiffened and the shock absorbers re-rated.
Powered by a performance - tuned 5L V8 producing 423bhp at 6,600 rpm and 505Nm of torque Sport Vehicle Dynamics Integrated Management (VDIM) programmed to suit high performance driving Limited Slip Differential
fitted as standard Lexus / Brembo developed 360 mm ventilated and drilled six piston front and 345 mm two piston rear disc brakes provide optimum braking performance Bespoke, lightweight forged BBS 19 - inch alloy
wheels Dedicated high - performance tyres, developed with Michelin and Bridgestone Stiffer, stronger, lower suspension design Pre-crash Safety (PCS) and Adaptive Cruise Control (ACC)
fitted as standard 10 airbags including driver and passenger knee airbags Multimedia Pack with 14 speaker Mark Levinson premium surround audio system, satellite navigation and rear park assist monitor
fitted as standard Extensive pre-production testing carried out at the world's top
race circuits Nought to 100km / h in 4.8 seconds with top speed electronically limited to 270km / h The introduction of the IS F represents a significant milestone in the history of Lexus.
Additionally, the test car was
fitted with Chevrolet Performance air induction and exhaust systems, as well as a «small» brake system that features small - diameter brake rotors that
fit inside the test car's 16 - inch rear
racing wheels and slicks.
For the 1928 Mille Miglia endurance
race, two new chassis were
fitted with roadster bodies featuring cycle wings, running boards, doors, headlights, a small windshield, a folding canvas top and two spare
wheels mounted on the tail.
Also very much at home on the
race track are the light - alloy
wheels (front: 9 J x 19, rear: 10 J x 20) designed exclusively for the M4 CS and
fitted as standard with Michelin Pilot Sport Cup 2 tyres (front: 265/35 R 19, rear: 285/30 R 20).
It's
fitted with T37 Ultra Nismo Red
wheels, a Voltex Type 7
race wing and Recaro Profi
race seats with Willans five - point harnesses and a six - point roll cage as well as custom steering with paddle shifters.
As a result, the car is
fitted with track - oriented features including an adjustable front anti-roll bar, Nitron adjustable dampers, Eibach coaxial coil springs and double wishbone suspension, uprated brake pads, FIA approved carbon fiber
race seat with six - point
racing harness, a removable steering
wheel and a polycarbonate rear windscreen.
Also very much at home on the
race - track are the light - alloy
wheels (front: 9 J x 19, rear: 10 J x 20) designed exclusively for the M4 CS and
fitted as standard with Michelin Pilot Sport Cup 2 tyres (front: 265/35 R 19, rear: 285/30 R 20).
The Advanti
Racing S1 STORM MATTE BLACK
wheels is also offered in many different fitments, finishes, and sizes so finding a set of Advanti
Wheels to
fit your ride will be simple.
These is also the 2012 Ford Mustang by Creations n» Chrome which uses pray - on paint and carbon fiber components (hood, roof and trunk) to achieve its unique appearance, plus it is
fitted with a roll cage, 18 inch forged
wheels, a supercharger and various
race inspired interior upgrades.
The Advanti
Racing 15th ANNIVERSARY MATTE BLACK
wheels is also offered in many different fitments, finishes, and sizes so finding a set of Advanti
Wheels to
fit your ride will be simple.
Exhibitor: Craftsman / KDC Brands Phone: 847-286-3689 Email:
[email protected] Website: http://www.craftsman.com/ Booth Number: 20117 Customizer / Builder: Hot Rod Chassis & Cycle, Chicago, Illinois Powertrain / Drivetrain: Roush 427R engine; Hilborn stack injector; Holley computer; Hurst Driveline transmission; Hedman headers; Flowmaster mufflers; Flaming River steering; Moser Engineering rearend; Aeromotive fuel system; Dynotech driveshaft; Powermaster alternator; Painless wiring; C&R
Racing radiator; Spal fan; TechAFX Fuel synthetic fuel lines and
fittings; Red Horse Performance
fitting; Moroso catch can breather system and power steering pump reservoir; Quicktime bell housing Chassis: Hot Rod Chassis & Cycle chrome moly tube chassis; Moser Engineering rearend; Wilwood brakes; Ridetech supspension; Miller Electric welders; Nitto tires; Weld
Racing wheels Exterior: VFN Fiberglass hood, decklid and bumpers; Hot Rod Chassis & Cycle design; Performance Associates Coachwork and Customs paint
The side sills look like the ones seen on the Vorsteiner Verona model, with their large vertical fin just in front of the rear
wheels they still look amazing on this new Novara kit while the biggest change can be seen at the rear... the entire lower section of the original car is gone and a
race inspired unit is
fitted with vertical stabilization fins... it does look to be inspired by the Lamborghini Veneno in fact.
The Stinger was
fitted with oversize radial tires mounted on Jackman Star (brand) aluminum
racing road
wheels, a side mounted exhaust, NACA duct on the hood, auxiliary Cibie (brand) driving lights, as well as a front spoiler and
wheel well fender extensions.
The Advanti
Racing FS FASTOSO MATTE BLACK
wheels is also offered in many different fitments, finishes, and sizes so finding a set of Advanti
Wheels to
fit your ride will be simple.
The photographs here show the first car prior to the
fitting of the
race spec rear wing, steel brakes and
race wheels.
Fold down those seats and the trunk space expands to
fit the four
racing wheels and tires you will definitely have for track days and drifting.
The suspension is lifted 3 - inches and
fitted with FOX remote reservoir
racing shocks, for increased
wheel travel.
The lift
fits the Bronco with the 35» x13.50» Toyo tires with American
Racing wheels and it has front high - back bucket seats, and a hard top.
The GT3 rides on new, lighter
wheels in a
racing - inspired design — with a centre locking nut —
fitted with ultra-high performance (UHP) tyres.
Testing with M1 GT
Racing at the NOLA facility earlier in 2015, Pegram was able to turn fast and competitive
race laps and will be a great
fit behind the
wheel of the M1 GT branded Audi R8 LMS.
The GTR interior was stripped down to save weight; the air conditioning, stereo, and sound and heatproofing were removed, and a single
racing seat with 6 - point seatbelt harness, MOMO fire suppression system and steering
wheel, complete integrated roll cage, fixed Plexiglass windows with sliding sections, and fresh air intake were
fitted.
Honda didn't dive into the specifics but it looks like the racer has been
fitted with an odd, if not menacing - looking carbon - fiber front spoiler lip, an enormous rear wing, side vents, and a set of multi-spoke alloy
wheels wrapped in
race - ready Bridgestone Potenza tires.
Are you interested in seeing how
wheel - to -
wheel road
racing (sports cars or open
wheel)
fits into your current or future plans?