Then drilled holes for the dowels on the underside.He put tight bond three in the holes and put it together.
He put nails into the cross first,
then drilled holes in his hands and hung himself on the cross, reports said.
Not exact matches
He
then takes the bit to the iPhone 7 and
drills a
hole into the device.
The exploration target they are working with right now is more
then 40 km long, and the first four
holes they
drilled in a new exploration program increased the target by more than 15 %.
The rock face with the grid painted on it is about to blasted to smithereens (the giant rock
drill to the right
drills holes into it, which are
then filled with explosives).
Home Depot coats the inside of its cans with protective resin, so I cleaned that out with some solvent, washed that out thoroughly,
then marked some
holes for
drilling.
I compared the diameters for the bolts on the thermometer and brackets with the sizes of my
drill bits to get the right size
holes,
then got down to business.
You have to press it against the forehead for 2 to 3 seconds or
drill it into the ear
hole and
then press the matching button (for the forehead, the «head» button, and ear, the «ear» button).
We
drilled a
hole in the milk carton, pushed the tubing through the
hole,
then used a cable tie to fix it in place.
The whelk however has the upper hand because it has the ability to
drill a
hole directly through the clam's shell by softening it with secretions and
then consumes the clam as meal.
Then, aided by borehole cameras revealing in which direction the fractures formed, they would have
drilled a second
hole to intersect the new fractures and would have produced steam by pumping water through the hot fractures linking the wells.
Then they bored tiny
holes into the crystals with sterilized
drills to reach a pocket of trapped brine.
He
then seeded the cells on a polymer scaffolding, infused them with apatite (a mineral component of bone), and injected the mix into small
holes he had
drilled into the animals» skulls.
Bacterial big game hunters
drill into victims, brace the
hole, and
then seal the wound behind them
We often use one or two geological models produced by geophysics, test them by
drilling some
holes and
then make a decision based on the results.
«One has to
drill a
hole through skull,
then pierce tissue with a needle to the injection site,» explains Viviana Gradinaru (BS» 05), assistant professor of biology and biological engineering at Caltech, Heritage Principal Investigator, and senior author on the paper.
Instead, chiggers
drill microscopic
holes into the skin with their mouth and
then secrete specialized salivary enzymes (aka - spit) onto the skin.
To make the shelf lay flat,
drill a 1.5 inch
hole halfway through the board first and
then drill a 1.25 inch
hole the rest of the way.
Then you'll need to
drill out an initial 3/8»
hole in the concrete with a masonry
drill bit or hammer
drill.
Then I used a 1 1/2 inch spade bit attached to my
drill to make the
holes.
I
then drilled a starter
hole for the feet.
I just
drilled a
hole in the middle of the chunky piece of wood I used as a base, and
then stuck the twig down into it.
Then I had to
drill a
hole through the hose clamps.
First, cut all your 1 x 6 pieces
then drill pocket
holes with the Kreg Jig as I've shown below.
Then, using the
drill bit that comes in the R3 kit, you
drill holes by sticking the
drill bit in the
holes on the R3.
I
then drilled a tiny
hole into the dowel rods.
Nevertheless, the film gets a little sloppy in continuity, especially as it races toward the end, such as a scene involving a robot getting
drilled by V.I.N.CENT in one shot,
then seen outside the ship in the next, hurtling toward the black
hole.
If there is sufficient metal surrounding the bolt so fitting a larger bolt will not impact structural integrity centre punch it (so your
drill bit won't slip)-
drill it out and tap a new thread in 3 stages to accept a larger bolt.Use a pilot
hole then ever larger
drill bits.Not applicable in all cases; but one option that has stood the test of time
I
drill a
hole with the
drill bit,
then use the extractor to remove the broken bolt.
That means they took the time to
drill 42 little
holes,
then weave some zip ties through.
You
drill a small
hole that the screw tip of the puller grabs and it
then pulls the plug out.
Drill a couple small
holes in the bed as well,
then cover the freshly cut
holes with some body matching paint.
Below, first select which
drilling pattern you require (if you require a special
drilling pattern, please contact us first),
then select whether you require 2, 3 or no button
holes.
Below, first select between flat - bottomed or standard round,
then which
drilling pattern you require (if you require a special
drilling pattern, please contact us first),
then select untrimmed or Alcantara trimmed (note: the flat - bottomed 330 is only available trimmed),
then select whether you require 2, 3 or no button
holes and finally select whether you require the steering wheel to be able to accept a Farringdon ST8600 display (not included).
It's as simple as
drilling a small
hole behind your license plate to connect the camera to the transmitter, and
then connecting the transmitter to the reversing lights» power source and placing the small transmitter in the trunk.
This camera mounts into your factory grille by
drilling a single
hole in your upper cross member,
then run the harness to the cab and connect to your factory MyFord Touch screen using the included 8» SYNC 2 interface module.
Only by
drilling two relief wells to connect to the initial
hole,
then pumping mud and concrete into the gushing pipe could Petroleos Mexicanos, or PeMex, Mexico's national oil company, stop the leak.
Then, use the
holes in the plastic base to mark the
drill points on the wall.
If a company is already priced as if it'll
drill a dry
hole,
then just buy it before — what've you got to lose?
Then I lined these
holes up, and
drilled in screws.
Nylon monofilament sutures are
then looped behind the fabella bones adjacent to the femur, passed through a
hole drilled in the tibial crest, and secured to the tag end using crimp sleeves or surgeon's knots.
The so - called dry rock geothermal involves
drilling very deep, pumping water down the
hole, where it heats up, and
then pumping the hot water back up to the surface using another source of energy.
Then attach a very sensitive thermometer to the surface of the sphere — perhaps inside a
drilled hole for better measurement.
For example, TreeHugger favourite Michael Iannone is standing next to a console that he built out of wheatboard and bamboo, but
then photoshopped an image into dots that are translated by a computer controlled
drill into 3,500
holes of various depths, creating the image on the face of the unit.
But Ben Barclay of REEP tells me that they
drilled a lot of
holes, used a really free - flowing type of polyurethane, and
then used a thermal camera to ensure that there were no voids.
If the exterior of your house is brick or masonry, you'll need to use the included
drill bit to
drill holes where you made marks, and
then insert in the two yellow wall anchors before screwing on the mounting plate.
For new owners, installation is pretty simple: just
drill four well - placed
holes where you want the doorbell to live,
then use the included wall plugs and screws to fix it in place.
I have
drilled a small
hole in the bottom of a cabinet and poured some in
then caulked it closed.
He
drill a big
hole on the wall
then we pushed that special screw in.
Wrap your gifts once in colourful tissue paper,
then take a sheet of Kraft brown paper, and using a paper
drill, make
holes in it.