In addition, use of the sealed «cathedralized» attic in hot climates can be a successful approach to avoiding pervasive problems associated with ducts located in attics and
air leakage at the ceiling level, without energy penalty.
Not exact matches
The only way this problem could be addressed is if the civilian customer complains to a dealership about
air leakage problems, an inability to balance the wheels properly, or a «nibble» or excessive vibration in the steering
at speed.
As I and others have written repeatedly, there's plenty that can be done — often
at a profit — to cut
leakage of gas into the
air from wells, pipelines, distribution systems and other equipment.
During initial construction stages of project, we performed
air leakage testing
at a small sample of apartment units
at intermediate stages of scope to assess success of implementation and help the contractor understand
air sealing measures.
All new homes built in the state had to show through performance testing that they had an
air leakage rate of less than 7
air changes per hour
at 50 Pascals of...
Air changes per hour (ACH) is a measure of the air leakage of a building, calculated using a blower door at a standard pressure difference of 50 pascals (a unit of pressure) between inside the home and outsi
Air changes per hour (ACH) is a measure of the
air leakage of a building, calculated using a blower door at a standard pressure difference of 50 pascals (a unit of pressure) between inside the home and outsi
air leakage of a building, calculated using a blower door
at a standard pressure difference of 50 pascals (a unit of pressure) between inside the home and outside.
Pros: has one of highest R value ratings, adds structural rigidity to a frame, resistant to pests, most effective
at reducing
air leakage, a kit can be bought / rented to do installation as homeowner.
It's also obvious to me
at this point that the best thing about these blower door tests is not that we're reducing
air leakage in new homes (4 ACH50 is the broad side of barn) it's the conversations being started because of them.
Benchmark 1: 0.6 ach The Passivhaus standard requires that a building be airtight enough to reduce
air leakage to below 0.6
air changes per hour
at 50 Pascals when subjected to a blower door test.
The ductwork system and
air handler should be tested for
leakage (less than 5 percent
leakage at 25 Pa).