The 2.3 - liter inline - four gas engine is optimized for efficiency with the Atkinson combustion cycle, which lowers the effective displacement of the engine by letting a bit of the fuel -
air mixture out through the intake valves at the beginning of compression.
Not exact matches
A little elbow grease when you stir can help whip some
air into the
mixture and thin it
out, too.
You do actually want to get a lot of the
air out of the
mixture — you do this by folding and squashing the
mixture against the side of the bowl, rotating the bowl a quarter turn with each fold.
Is that because I haven't worked
out sufficient
air or because I've overworked the
mixture?
Press top layer of pasta over spoonsful of squash
mixture, making sure to press
out air bubbles.
** I live in Colorado and do not have
air conditioner in my home so my
mixture was very runny and there was NO way I could spread and shape this
mixture on any kind of pan with
out sides so I opted to use a nut butter cup candy mold... worked like a charm!
This allows the oil to be fully incorporated into the egg
mixture without taking
out the
air you beat into it before.
Freeze the thick
mixture as cubes, knocked
out into doubled freezer bags with all the
air expressed.
The smelter had to build a furnace
out of clay in precise dimensions, provide the right amount of oxygen and charcoal, maintain a 1,200 degree (Celsius) heat, connect bellow pipes, blow a fixed amount of
air, and add an exact
mixture of minerals.
It turned
out to be the
air fuel
mixture, fiddling with the little adjustment screw on the carburettor sorted
out the problems.
An
air / gas
mixture at high pressure creates a much denser gap for the spark to jump then in
out in the open.
A misfire occurs when a cylinder fails to ignite the
air / fuel
mixture at the right time and could happen due to a wide range of reasons, including lack of spark (a bad coil), lack of fuel delivery (clogged fuel injectors) and improper ignition timing (
out - of - spec cam timing).
The improved flow of
air / fuel
mixture into the engine and exhaust gas
out of the engine boosts power.
A vacuum leak from items like a broken
air intake boot, broken / disconnected vacuum lines, or a leaking intake manifold gasket can lean
out the
air / fuel
mixture or disturb intake airflow enough to...
Since the valve stays open longer, the piston's upward movement forces some of the fuel -
air mixture back
out of the cylinder.
Tom: And that extra
air «leans
out» the
mixture (i.e., lets in too much
air compared with the amount of gasoline) and makes the car idle poorly.
Instead of consistently injecting the fuel -
air mixture onto certain points within the combustion chamber, the laser - drilled holes, laid
out in a pyramid shape, provide a more even spread of fuel and
air throughout the cylinder.
There are four valves per cylinder: two per cylinder that let the fuel -
air mixture into the engine and two that exhaust that the bad
air out.
Whether painting in plein
air, or working in the studio, I set
out each day on a journey to bring the subtle contrast of light and dark onto my canvas through the use of oil paints with a
mixture of brush and knife.
That works
out somewhat similar in the case of N2 / O2
mixture (the
air is mostly N1 and that's quite a bit less dense than O2), but by not using the right metrics, you are either opening yourself up to being dismissed as ignorant or explaining why you don't know what's going on.
That
air column allows
mixture with
air from the polar cell, but the water picked up will be precipitated
out before the polar cell can cause it to circulate over greenland.
While I haven't tried this experiment myself, I foolhardedly predict that the resulting
mixture will start
out as supersaturated
air at temperature 280 K and pressure 620 hPa with RH = 200 % (anyone who cares will have no trouble verifying this using only the specific heat numbers I've given earlier, no thermodynamic needed), and (more importantly for thermodynamics) that it will in due course become
air at T = 287.7 K and P = 634.5 (higher pressure) with RH = 100 %.
Pour the
mixture into a large zip - top bag, add the tofu slices, gently slosh them around so they get coated, squeeze the bag to suck
out as much of the
air as possible, and place the bag in the fridge to let the tofu marinate for at least 3 hours but no more than 5 hours.
The
mixture of hot pavements combined with heavier loads, long periods of travel, and hot
air in your tire is the perfect recipe for a blown
out tire.