A new twin -
airbox intake path lifts horsepower by four and torque by nine pound feet, thanks to a secondary intake stream that opens at high rpm.
Not exact matches
There's a snorkel kit to a cold - air
intake, and a replacement
airbox with a high - flow filter, so you might be able to cut your commute time if there's a shortcut through a shallow river.
To liberate extra power from the Fiesta, Mountune has fitted a different
airbox, along with a secondary air
intake to take full advantage of the ECU remap.
A modified Hellcat
airbox and cold - air
intake adds a minor boost in performance, while a factory 2.75 - inch active exhaust will have your neighbors complaining.
There are several ways to check this: block the air
intake completely The easiest way to do this is disconnect the
airbox and cover the piping before the...
Lamborghini's claimed outputs of 690bhp and 508 lb ft of torque will be increased by around 10 per cent with an ECU remap optimising a larger
airbox and
intake pipe, along with a titanium exhaust system that saves over 30 kilos.
The Suzuki SX4 concept receives mild performance upgrades, including high - flow
airbox /
intake, cat - back exhaust, an enhanced suspension and multi-piston alloy brake calipers mated to cross-drilled, vented rotors.
The U.S. - spec
airbox features less baffling to allow for more sound, and the air
intake pipe itself utilizes a porous material to allow sound to emanate.
4.2 liter stroker engine (103.6 mm x 82.4 mm) Secondary oil jets for pistons High pressure oil pump Cylinder head porting Special head sealing system and headstud upgrade CNC designed
intake manifold Fuel system upgrade with 3 pumps 64 mm Titanium turbochargers Esmotor built tiptronic transmission NEW rear wing carbon
intake system (utilizing modified stock
airbox) NEW 90 mm (3.5 inch) stainless x-pipe exhaust system Custom designed headers Water / methanol injection kit
Through their pronounced edges, the substantial air
intakes — which also feature diamond - pattern grills — appear almost like inserted
airboxes.
It features Carillo connecting rods, 4.0 - liter
intake manifold, ATI Engine Damper, 4.0 CP oil pump, ported and polished heads, extra oil spray jet, 4.0 - liter dive planes, JE pistons, and to top it all off — a custom - built exhaust by M&M to go with a customer carbon fiber
airbox and heat block.
It seemed reasonable to suppose that in front of the oil cooler a high pressure would be developed, and so if a new
intake duct was fed from this location to the engine's
airbox, some ram air effect would occur.
The IS Series is a traditional, underhood air
intake system that takes the place of your factory
airbox and air filter, and the factory air
intake tube.
After the new snorkel had been installed, the maximum recorded pressure drop of the complete
intake system — snorkel,
airbox and filter — decreased to just 2 inches of water!