The Galaxy Tab has stereo speakers
along its side edges, about an inch and a half from the top of the device.
It would also have been nice if it could slide
along the side edge and / or the top edge.
It has a bigger battery than the Galaxy S6 and provides clever notifications
along its side edge that let you know who's calling, which is almost worth the (admittedly quite pricey) rate of admission alone.
Step 5) Turn under 2 cm then 3 cm
along each side edge of each curtain.
Step 3) To hem the side edges, press under 7 cm
along each side edge then turn under the raw edge by 2 cm.
Not exact matches
Imagine ourselves back some four billion years ago on this planet facing two scenarios: on one
side, a vast turbulence, terrific volcanoes belching forth from the inexhaustible fires of the earth's core; on the other
side the beginnings of living cells, microscopic, invisible
along the water's
edge of some shallow sea, quiet, vital.
With their lightly crusty
edges, creamy soft centers, easy comfort, and the fact that almost every ingredient can play and sing
along embedded in custardy creamy eggs, frittatas are the perfect Summer companion, and this Oaxacan Frittata is the one you want this summer by your
side.
Run a wide spatula
along the
edge to loosen the crêpe, then flip it and cook the other
side until light brown.
When ready to serve, run a knife
along the
edges of the cake and remove the
side of the springform pan.
On a lightly floured cutting board, roll out the dough to 3/8» thick and line a 9» tart pan, pressing
along the
sides and removing excess from the
edges.
You want to leave 1 1/2 inch unsprinkled
edge along one long
side of the rectangle and you want to completely cover the rest of the surface.
Once bubbles are formed on top and
along the
edges, flip the cake once to finish cooking on the other
side.
Using thumb and forefinger, press decorative
edge along side, around top
edge.
Hopefully a bit of a mental
edge was gained today,
along with the three points, but, as per with this
side, there's no telling if one was.
NEVER use older, accordion - style gates with large V - shaped openings
along the top
edge and diamond - shaped openings in the
sides that are large enough to entrap a child's head and strangle the neck.
Sts are then picked up
along outer
edges to finish
side rib.
Because the scarf is a Mobius strip, a «non-orientable» object with only one
side: If an ant were to crawl
along the strip, it would traverse both the «inside» and the «outside» without ever crossing an
edge.
Press the bases of your palms
along the outer
edges of the feet and gently push the pinky - toe
sides of the feet to the floor.
Continue angling the straight
edge so that it touches the outermost
edge of the nose passing
along the outer
side of the eye.
Crib Skirt features tassels
along the
edges and is split on 4
sides to make it easy to fit over
side rails, and head / footboards.
Next, line up the bandannas right
sides together and sew
along the
edge using a 1/4 inch seam allowance.
This adorable mini features a tie
side and ruffles
along the
edges.
(If you are using regular tulle, also try to cut
along the
edges of the pieces where the threads join, otherwise you end up with thread «legs» sticking out, rather than a neat
edge) If you gather the veil in a semi circle shape, it will pull into a rounded shape and the
edges will meet up with the
sides of the hat.
The lapels are unlined -LCB- the wrong
side of fabric shows -RCB- and so I chose to continue the gingham bias tape -LCB- self made -RCB-
along the exposed front
edges.
I rely on the pointy
side along with makeup remover to create well - defined
edges around eyeliner and shadow or to fix any mascara mistakes.
I hand - stitched the skirt onto the dancer, using a standard stitch at the top and a ladder stitch
along the
sides so that the
edges would tuck under.
Fabric: Soft terrycloth Tonal trim
along edges Side slits at hem Stripe pattern Cover - up dress Split V neck 3/4 sleeves Unlined Shell: 80 % cotton / 20 % polyester Wash cold Imported, Philippines
Pin the fabric pieces together
along the
edges and sew all four
sides of the pillow cover.
Step 5: Pin flowers onto the front
side of the sweatshirt
along the
edge of the cold shoulder cutout.
Do this by having the right
side edge of the fabric and ruffle facing each other and sew the seam
along the
edge.
Using the black washi tape, wrap tape
along the
edge of the
side, leaving enough tape off of the roll so that you can bend it over
As I watched one after another throw themselves down the impossibly steep
edge of the depression, only to zoom
along the bottom and come flying up the other
side spinning, weaving and sliding around, a thought struck me.
The replacement bridge will consist of six, 12 - foot travel lanes, 12 - foot outer shoulders, and 5 - foot inner shoulders, as well as a 10 - foot bike / pedestrian path
along the northern
edge of the New Jersey - bound
side.
A strong character line develops above the car's front fenders and runs
along the
sides of the car, with a second swage line
along the lower
edges of the doors.
The turbo radiator - inlet efficiency is enhanced by the hard
edge above the opening, indenting the body
side to provide more frontal area for ram air
along the lower body.
A deeper front bumper is added, with winglets on its leading
edges,
along with chunkier
side skirts and a compact rear diffuser with two round exhaust pipes either
side.
Seen from the
side, the MINI Electric Concept stands out thanks to the fiberglass add - on parts
along the lower
edges of the car as well as the striking design of the 19 - inch alloy wheels with 3D - printed aerodynamic inlays.
Along with the great Lift / Wheel / Tire selections, this Custom Rubicon is loaded with many other quality aftermarket components such as: *** EXTERIOR *** - Signature Commando Green Exterior Finish - MetalCloak Aluminum Fenders w / outer
edge finished in Black - Lifted Off - oad Hood w / Rugged Ridge Hood catches - Lifted Off - road Grille - Fab Fours Front Bumper with Stinger - SmittyBilt X20 10K winch with FairLead - SmittyBilt Recovery Hook - SmittyBilt 3/4 D - Rings w / Daystar Isolators - DV8 Inner Fender Liners - AMP Research Power
Side Steps - SmittyBilt Rear Tire Carrier *** LIGHTING *** - ProComp Headlights - Rugged Ridge Smoked Tail Lights - Rigid Industries 2x2 LED Dually Light cubes mounted to the A - Pillar * LIFT and SUSPENSION - TeraFlex 4 Lift Kit - TeraFlex Front Steering Stabilizer - Exhaust Spacer Kit WHEELS and TIRES - 20 Fuel Beast Wheels - 37/12.5 r20 Nitto Trail Grappler Tires ** INTERIOR *** - Custom Premium Eleganza Heated Leather Seating in Black w / Green contrast stitching - RED LED Rocker Switch - Alpine System A Alpine 7 ILX - 107 / 207 or INE - W960HDMI Touchscreen Reverse / BackUp camera w / mount IdataLink (3x Lock to start) remote start integration - Starwood Motors All Weather Floor Liners - Starwood Custom Billet Badge - AEV ProCal Module * For all inquiries please contact Starwood motors at 888-464-7174 *
Front fenders express power and stability, «aero - blades» on fenders»
edges provide optimum air flow around the tires and
along the body; vents in the fenders» trailing
edges assists in providing front downforce and optimization of
side air flow
The Lexus spindle shape is visible here in a three - dimensional form that is generated by lines flowing from the front of the car and
along the
sides, before cutting back around the inner
edge of the rear combination lamps.
Firmly pull out the pop rivet friction fasteners all
along the bottom
edge and both
sides of the door panel.
In profile the
side skirts of the VW Golf Mk V that extended the length of the sill are replaced by subtle wraparound versions that extend only partially
along the lower
edge of the vehicle.
On a
side note, the
edges of the roof are actually elevated just a bit over the center roof portion — this should indicate strength reinforcement in this area, but also goes
along visually with the look of the hood and the rear end quite well too.
A direct visual link is created by the tail light assemblies, whose upper
edges merge seamlessly with the character line
along the vehicle's
sides.
The external appearance and equipment of the VAM Pacer consisted of a full bright molding package (wheel lips, top
edges of the hood and fenders, window surrounds, rocker panels), bright rear panel between the taillights and the rear licence plate housing, protective
side moldings, front and rear bumper guards, bumper nerfing strips, five - mile - per - hour bumpers with recovering shocks (only VAM car with this characteristic
along with the Matador - based Classic line), five - spoke in - house VAM wheels, trim rings and full cover volcano center caps on the wheels, ER78x14 radial tires, driver's
side manual remote mirror, radio antenna on the passenger's
side fender, squared VAM logo emblems on the fenders, Pacer emblems on the fenders and bright rear panel and a two - step hood latch.
The restyled front bumper features bigger
side air intakes
along the
edges.
Elwood Engel designed the»65 New Yorker (and all Chrysler models) with styling cues from his 1961 Lincoln Continental — square
side view with chrome trim
along the top
edges of the fenders.
A further feature immediately recognisable from the
side is the waistline at the level of the door openers characteristic of BMW, extending from the outer
edge of the headlights, rising slightly
along the entire length of the car, and continuing all the way to the contours of the rear light clusters.
The high - performance adhesive material is used
along the roof
edges, in the roof pillars,
side sills and rear wheelhouse, and extensively in the vehicle's floor pan.
While the first gen Tablet S presented a curved
edge along one
side that resembled a closed magazine, the new Tablet S retains the same though in a more subtle manner.