Sentences with phrase «also drill holes»

You can also drill holes in any large, sturdy plastic container so that grain comes out as your horse pushes the toy around the stall or pasture.

You can also drill holes in the bottom of the container and place the garden box on top of a pan or something similar.

Not exact matches

Validations were conducted to review the information of the nearest neighbor for global bias and drift, whereas for the general neighborhood review (where blocks around drill holes are also included), composited samples of 1.5 m were used.

Our gates DO NOT mount into your base moldings further minimizing damage and we also have a CUSTOM NO HOLES mounting systems for a more secure installation and to avoid drilling holes into your stair banisHOLES mounting systems for a more secure installation and to avoid drilling holes into your stair banisholes into your stair banisters.

You can also screw the Lexan sheet to the window frame instead of Velcro to get a more permanent solution, but first you will have to drill pilot holes.

You can also create a custom shaped sprinkler using the same idea with PVC pipe and drilled holes.

Their goal was to read all the vital signs of an earthquake — not just fault motions but also the precise pressures, temperatures, strains, and chemical compositions of minerals in the nucleation zone, along with an analysis of rocks and fluids extracted through the drill hole.

Drilling a hole into one of these subsea pingos, can be not only expensive but also catastrophic.

Also, the depth of the holes can vary (the length of an average drill bit is fine).

The new engine also features a six - hole laser - drilled GDI injector, high pressure fuel supply system of maximum 200 bar, securing clean combustion, improving fuel economy and reducing emissions to fulfill all global emissions standards.

The Vector Series coilovers are also a bolt - on but require two 5 / 16 - inch holes to be drilled in the upper control arms (but the arms don't need to be removed) for the lower coilover mount to attach.

With the high SV look rear wing you actually get two options from DMC, you know there is an adjustable rear wing sitting flush with the body on the original Aventador, this item can be replaced with a DMC unit finished in clear carbon fiber... but if the owner also orders the SV rear wing DMC will deliver this lower unit with pre-drilled holes which make installing the SV wing very easy, and has the additional advantage you can fit the original wing back in place as you didn't have to get holes drilled into it.

There's also the small matter of a massive drill digging a hole in Seattle that released volcanic gases that turns people into zombies.

You'll also need to drill holes in the sensor's removable plastic base.

Also, the shelter in our photo has a little hole drilled in the side to allow water to drain out if rain blows in the front door.

Also, a hole drilled into the concrete floor has been treated with rat pheromones, the idea being that urban rodents will be enticed to enter.

There is also a performative quality in his works, which becomes clear not only when Linnenbrink pours the resin with its added pigments onto the image carrier, or drills holes in the hardened paint layers of some paintings.

They also have holes drilled into them in the pattern of star constellations.

These workers also cut the structures to proper size, drill bolts for holes, and number them for onsite assembly by construction workers or solar photovoltaic installers.

To work out how much meltwater might be stored within the pores of the firn, the scientists set up camp in 2012, 2013 and 2015 on the ice cap to use radar and to drill a series of holes 20 metres deep into the porous firn layer − also choosing sites where samples had been taken 20 years ago.

The placement of the headphone jack, microUSB port and machine drilled speaker holes on the base mimic the iPhone 6, while the change from a volume rocker to separate metal keys on the left also suggests a Cupertino influence.

That sounds practically impossible, so drilling holes into OLED panels or using so - called «BM (Black Matrix) area within displays» are also in consideration, at least for the time being.

The Detect also offers a nice design, as far as sensors go, keeping in line with the rest of the Secure system and it is easily installed, sticking to wherever you want to place it rather than you needing to drill holes anywhere.

In the box you'll also find a roll of 3M tape if you'd prefer not to drill holes in your wall.

The job profile also includes drilling holes through interior panels, connecting hoses to evaporator and cool - air outlet, filling compressor with start units and refrigerant, threading hoses through holes and measuring compressor pressure by using gauge.

They would also drill all the holes for the new hardware I wanted.

The organizers came with holes in the back, so I just had to drill some screws in the wall (I also used wall anchors) and hang them.

The instructions also say to drill these holes in the middle of the board.

Also, once you drill a hole in the door or drawer face, you can't really go back.