Make sure to use a good
amount of wood glue to attach the top to the base.
Using a generous
amount of wood glue, attach the 5 pieces of your 1 × 4 to the particle board and cover with something heavy (or clamp if you're fancy!)
Put a pretty good
amount of wood glue around the inside of the craft ring.
Use a small
amount of wood glue to mount the letter to your wood board.
He applied a generous
amount of wood glue in the channel and laid the first piece of spline in place.
I used two smaller pallets that were definitely not going to be used for anything else, put a generous
amount of wood glue on the back of them, and then glued them down behind all the pallets.
Step 4: Mix equal
amounts of wood glue and water to make glue sizing that will keep the paint from sinking into the porous MDF.
Not exact matches
As an all -
wood mass timber product, DowelLam does not contain any
glue (aside from a minute
amount of glue used for finger jointing), chemicals, VOCs, or metal nails.
Since you've already done a dry fit for the pieces, just apply an even, yet somewhat light
amount of glue to the backing, use a
glue spreader or plastic scraper
of some sort (or even scrap
wood) to spread the
glue out evenly.
Just read the instructions to see if it
glues wood, glass, ceramic, metal... and give it a good
amount of time to dry.