Then
I applied wood glue along each board edge and connected the boards together using 2 1/2 ″ Kreg screws.
I arranged the pieces using a square and this time
I applied wood glue and nailed the support pieces to the back of the sign.
At the tongue and groove of each plank, I liberally
applied wood glue.
Apply wood glue between the brim and the hat.
Apply wood glue between the hat and the head.
Now lift the table base slightly to
apply wood glue inside the traced area.
Apply wood glue to the last 1/2 inch of one bamboo slat.
Once you have cut your diagonal board,
apply your wood glue and place on your door.
Apply wood glue to the surface of each frame.
You would still need to sand it a bit to try to smooth it out first, then
apply the wood glue over it.
A)
Apply wood glue to the top of the base, and clamp the top to the base and attach with finish nails.
Not exact matches
He
applied a generous amount of
wood glue in the channel and laid the first piece of spline in place.
Following a long career in photography, Lebreton revealed the encaustic and started
applying it onto his photographs that were previously developed and
glued on
wood.
Just to specify when you are talking about
applying to
wood floors, did you mean for the
glue mixture... 3 parts water to 1 part
glue or visa versa?
Since you've already done a dry fit for the pieces, just
apply an even, yet somewhat light amount of
glue to the backing, use a
glue spreader or plastic scraper of some sort (or even scrap
wood) to spread the
glue out evenly.
Apply a generous coating of hot
glue to the top of the painted
wood plaque, and then affix the completed fabric pincushion to the top of the circle, pressing firmly to ensure all portions of the pincushion are adhered to the
wood piece.
After that,
apply the
glue in the cut
wood and set the sofa console table in the back position.
You can see how sometimes the
wood glue, if not
applied evenly, will ooze out.
Wood glue is what will really be holding your stool together, so before nailing on each piece be sure to
apply a thin line of
wood glue to each one first.
Apply a bead of
wood glue to the surface of each frame.
Apply a bead of
wood glue to the exposed back of the trim pieces.
After
applying wood filler to some of the missing veneer and
wood gluing the legs back together, I painted it with Annie Sloan Coco (love that color) and waxed it with Minwax clear wax.
Apply a thin layer of liquid nails or
wood glue on the back of the board and nail 1-1/4 ″ finish nails into the corners and / or studs.
Before nailing in the rungs,
apply a little bit of
wood glue on each end.
Apply a bead of
wood glue to inside of dado.
For additional support,
wood glue can be
applied in - between all the
wood joints where screws are used.
Once your star is cut out attach the 1 × 2 frame using
wood glue and clamp or
apply weight and allow to dry for 24 hours.