Press paper tape into compound, Apply second and third coats of compound, Sand
areas after each coat / smooth out imperfections.
Not exact matches
After rinsing off in the in - room shower, you're
coated in some luxe lotion, with a special cinnamon - and - paprika lotion applied to cellulite - prone
areas (spoiler: it may tingle a bit).
Just apply a thin
coat to the diaper
area after each change and bath.
After twirling around North Beach in this beautiful lavender retro swing
coat from A by Anubha, I was excited to try out another colorful piece from the latest Fall / Winter outerwear collection from this Bay
Area designer.
No you do nt need to put a final
coat of clear wax
after the dark wax, and yes you can buff it, but try to stick to buffing only
areas that would get touched a lot... Looks more authentic that way!
As you might expect, from a computer security point of view, the Website is as safe as walking through a bad
area of town
after midnight wearing a
coat made of $ 100 bills.
Mineral oil, mineral bath oil (such as Alpha Keri ®) or propylene glycol mixed with water, sprayed onto the
coat or affected
area of the
coat, rubbed in, and shampooed out with a degreasing shampoo
after a one hour soak.
This is ideal when you own a Shih Tzu, since its
coat is one of the main
areas you want to look
after.
After a
coat of off white chalk paint in the recessed
areas, molding and medallion, the cabinet was ready to be lightly distressed and clear waxed.
After: A fresh
coat of paint on the kitchen cabinets and the walls instantly transforms this space into a sleek and sophisticated cooking
area.
Spray one very light
coat over the
area,
after 5 — 8 mins, spray another very light
coat over the
area.
After one
coat of oil I could see which
areas were going to bug me the most.
A tiled porch
area creates a really useful space for
coats and wellies
after a long walk on the nearby beach.
I inspected the doors
after the second
coat of paint was dry and found a few small
areas that needed touching up.
After painting one
coat of the Soft White, you can see the
areas where the beeswax is resisting the paint.
No you do nt need to put a final
coat of clear wax
after the dark wax, and yes you can buff it, but try to stick to buffing only
areas that would get touched a lot... Looks more authentic that way!
There were a few
areas that we missed on our own and touched those up
after the first
coat had dried overnight.
Multiple
coats of paint
after sanding down rough
areas, using a foam brush so no brush strokes and a very smooth even
coat of polyurethane.
If you want a two - tone look you would need to add vaseline to
areas after your base
coat and then add the second color on top.
Next
coat was a dark blue (My country room is decorated in patriotic old time blues and reds)
After painting on a small
area of blue in sections I used the wood rocker bought at our local craft store and kinda played with it till I got just the right look.