Okay so one of the things that I am adding to our living room walls is the board and
batten wall finish.
Not exact matches
1 As work progresses on the foundations, a plate compactor is used to ensure a solid, stable base for the concrete slab; 2 pouring the concrete slab; 3 a cross-section of the
wall build - up showing wet dash
finish followed inside by external insulation, 215 mm solid block
walls, sand - cement plaster and insulated plasterboard internally; 4 airtightness detailing around joist ends; 5 pro clima Intello airtightness system under counter
battens to create a service void while minimising airtight layer damage by service penetrations; 6 a parge coat serves as the airtight layer on the inner face of the single leaf block
walls.
Basement
walls: 12.5 mm plaster board with skim
finish on 90 mm Xtratherm XT / TL insulation, on treated timber
battens, on Delta PT drainage membrane, on 300 mm in situ poured concrete substrate, with 100 mm Kingspan Styrozone down to 1m below ground level.
The barn, serving as a guest house and three - car garage, is
finished in the tidy uniformity of reversed board - and -
batten walls and evokes the warm brick - red character of the Hardeman Barn in Wilson.
Also the fact that there are not a lot of big windows — the 2 tone
wall theme along with the proposed
batten finish will be too heavy.
Paint: Benjamin Moore Simply White OC - 117, Aura Interior, Satin
Finish (stencil) Benjamin Moore Yours Truly 1317, Aura Interior, Flat
Finish (
walls) Benjamin Moore White Dove PM - 19, Aura Interior, Semi-Gloss (board and
batten, trim, doors)
The technique involves
battening the
walls, applying soft padding called bump to support the fabric, seaming the fabric widths to size, tacking them to the
battens to keep the fabric taut, and
finishing the edges with piping or trimming.