I lightly sand in
between both coats of primer, as well as both coats of paint, using added pressure to the edges for a distressed look.
I lightly sanded using a 220 grit sanding sponge in
between coats of primer.
Not exact matches
What's the difference
between using one
coat of primer and one
coat of latex, or two
coats of chalk paint?
It took 1
coat of primer and 3
coats of paint - I sanded
between each
coat... the crazy thing is I am happier with the finish on my kitchen cabinets, and invested way less time into them!
I then used a 120 grit paper to prep for priming, and in
between each
of the two
coats of primer.
Holding the can approximately 30 cm away from the metal frame, apply up to two
coats of primer, leaving at least four hours
between each
coat.