Sentences with phrase «between electrodes»

Copper and Zinc electrodes are placed in each Brussels sprout to create a chemical reaction between the electrodes, generating a current which can be stored and used to power the LEDs on the tree.

The foam increases the area of contact between the electrodes and the active chemicals, and greatly reduces the problem of corrosion.

The researchers fill the pores with electrolyte and sandwich the material between electrodes.

By changing the electric field between the electrodes, it's possible to make the white or black granules move to the top of a capsule (the part closest to the reader's eye) so it appears like a white or black pixel.

The capsules are fixed to a substrate and sandwiched between electrodes, and when current is applied, one pigment is drawn to the positive electrode, the other to the negative.

The capsules are fixed to a substrate and sandwiched between electrodes, and when a current is applied, one pigment is drawn to the positive electrode, one to the negative.

The spaces between electrodes are small enough to give a resolution of 300 monochrome dots per inch (dpi).

These layers, along with a hydrophobic insulating layer and hydrophilic grid, are sandwiched between electrodes.

When high voltage current is applied to the electrodes, it excites the gases inside the bulb and forms an electrical arc between the electrodes

In terms of electrode placement, De Luca (1997) identified that electrode configuration (area covered, shape, and distance between electrodes), location of the electrodes (in relation to innervation point, the junction with the tendon, and in relation to other muscles), and direction of electrodes (in relation to the prevailing direction of muscle fibers) could all affect the signal recorded (De Luca, 1997).

When two silver electrodes are placed in contact with the skin of the body, and a small current is passed between the electrodes, the body itself completes the electrical circuit.

They observed the metal atoms becoming charged ions, clustering with up to thousands of others into metal nanoparticles, and then migrating and forming a bridge between the electrodes at the opposite ends of the dielectric material.

«The space between the electrodes is filled with a liquid electrolyte,» revealed Glanz.

«However, in reality doing this has proved to be no easy task because of the challenges associated with fabricating such narrow gaps between electrodes.

This complex layer quickly forms from the decomposition products in the battery's electrolyte, the substance in batteries that acts as a medium to conduct lithium ions between electrodes.

The aluminum ion and partner magnesium ion sit in the slit running down the center of the device between the electrodes.

The stream of electrons between these electrodes carry out separate reactions that split water and CO2, ultimately generating CO and more water.

The problems have been attributed to interactions between the electrodes and the molecules that stabilize one state, preventing the molecule switching.

They sandwiched a thin layer of a solid acid called cesium hydrogen sulfate between electrodes and pressed it tight for good contact.

«Up to the point at which the electric field breaks down and current flows across the gap [between the electrodes], more voltage gives you greater expansion and greater force,» Pelrine says.

This means that two metal electrodes are arranged very closely to each other, such that the molecule of about 2 nm in length is kept stable between these electrodes for many days, while current through the junction can be measured.

«No one was sure exactly why, but prestretching the polymers increased breakdown strengths [resistance to the passage of current between electrodes] by as much as 100 times.»

The pattern of electrical activity between electrodes inside the cortical compartment was relatively unaffected, suggesting the interconnectivity between the cortical neurons was unchanged.

The UV source causes the metal to be ionized, giving it an electric charge and causing levitation in between the electrodes.

Then they anchored numerous identical snippets of single - stranded DNA to the glass surface between the electrodes.

If added viruses destroy a continuous cell layer on the electrodes, for example, the electrical resistance measured between the electrodes is reduced.

When the team immersed the setup in a beaker containing the target DNA, the chip - bound DNA yanked the target strands out of solution, filling the space between the electrodes with a patchy lawn of anthrax DNA.

The active layer that absorbs light and produces electrons is located between these electrodes.

«In our investigations, we were able to show that the development of gasses in batteries can be reduced by adding the right admixtures to the electrolytic fluid or by inhibiting crosstalk between the electrodes.»

The cylinders will be sandwiched between electrodes of gold - plated silicon but also separated from them by thin spaces of vacuum — the test masses will float on the electrodes» electrostatic field.

In TDCS, electrical current flows continuously between electrodes placed on different parts of the scalp, activating neurons in one area and quieting them in another.

A voltage applied between the electrodes induced a type of electrical attraction between the gold pads and the metal rods, causing the rods to bridge adjacent gold squares.

«It is well known that both the electrolyte (the chemical medium that carries ions between electrodes) and electrodes (the positively charged cathode and negatively charged anode) have great influence on the battery performance,» says Dr. Yong - yao Xia, a battery researcher at the Department of Chemistry of Fudan University in Shanghai, China.

The new battery, described online February 28 in Joule, contains a special kind of electrolyte that allows ions to flow easily between electrodes even in the bitter cold.

The TEER measurement is used to quantify the flow of ions between electrodes and across the tissue - tissue interface made of an organ - specific epithelium and endothelium that is a core component of many of the Institute's human Organ Chips.

When the laser pulse has ionized the air, a current begins to pass between the electrodes and, as a result, the physicists are able to assess the appearance of the plasma clusters formed under the influence of the light that has formed into filaments.

This involves studying the engineering interfacial properties between the electrode and polymer layers to achieve the display and performance standards that consumers expect.

The new power source, which runs on liquid fuels, has at its core a thin layer of electrolyte materials sandwiched between electrode materials.

They dunk a positively charged graphite electrode into the salt and pass an electrical voltage between the electrode and the side of the crucible.

A high voltage is then applied across the gap, and the resulting electric fields convert the area between the electrode and the skin into non-thermal plasma.

In brainstorming sessions, the research team realized their combined effect had not been studied before; together the chemicals could potentially react with lithium metal to form a stable, solid interface between the electrode and the electrolyte.

The junctions were stretched by up to 10 nm until breaking during the experiments and simulations in order to identify any structural variations; it was found that the electronic coupling between the electrode and molecule decreases with increased stretching.

Currently, getting the excellent contact between electrode and electrolyte requires a costly processing step.

Core bridging or gap bridging is caused by materials of combustion lodging between electrode and the ground, causing the plug to short out.

In spite of the reduction of the electrode diameter contradicts to its durability, a fine end design has been adopted by different researchers [2], [3], [4], [5] and [6] to reduce surface interference of the flame contact between the electrode end and flame kernel.

Not exact matches

Tiny electrodes around the display recognize the difference between a tap and a press, which provides instant access to a wide set of contextually specific controls.

A copper - glass seal provides a gas - tight seal between the center electrode and insulator for maintaining ideal heat levels without letting gas enter the plug.

In devices known as capacitors, energy is physically stored in an electric field between metal electrodes.

In the readings from both the PEDOT: PSS and standard electrode grids, researchers could differentiate between when the patients were hearing the word versus when they were seeing it (or a picture).

They adhered a thin sheet of electrodes onto rats whose skin had been squeezed between two magnets to mimic pressure wounds.