If the floor has beveled edges, vacuum with the beater bar turned off to remove dust from
between the floor boards.
Significant exposure sometimes warps the shape of the floor board which can create gaps
between floor boards and dangerous splintering of the surface.
They settle in carpet,
between floor boards, in furniture and bedding.
Clean the floors so very well (vacuum in
between the floor boards!)
Not exact matches
If your bed is raised off the
floor, use mesh guardrails to prevent Baby from rolling off the bed, and be especially careful that there is no space
between the mattress and headboard or foot
board.
At 9:30 a.m., the PSC holds a special meeting, at which it will consider the merger
between Charter Communications and Time Warner Cable, 19th
Floor Board Room, 3 Empire State Plaza, Albany.
BMW's intelligent xDrive all - wheel - drive system spreads out engine power variably
between the front and rear wheels The electric motors receive their energy from an NiMH high - performance battery positioned beneath the
floor of the luggage compartment and feeding electric power also to the car's on -
board network.
Winter is a the period when you can spot slight gaps appearing in your hardwood
flooring between individual
boards.
For this exhibition Neuenschwander will make a site - specific geometrical drawing on the parkett gallery
floor by placing marble dust in the gaps
between the wooden
boards.
Q: Our beautiful wood
floors are starting to extrude chips and slivers from
between the
boards.
The contrast
between the wood gym
flooring and the white
board and batten is stunning.
The finishing coating will protect the
floor to some extent, but over time mold and mildew can grow in
between boards, and even beneath them.
They force moisture
between the
boards of your
floor and over time will damage the
floor.
With older wood tongue - and - groove
flooring, gaps will inevitably develop
between the
boards.
Complimenting window treatment and chair slip - cover fabric, if not the same for both, that has less contrast
between the pattern and background (light - to - medium shades on white, for example), would really set off the side -
board, hutch, and
floor.
- Install
board and batten (I used 1x4s along the
floor, 1x3s for the top
boards, 1/4 ″ plywood on top of the textured wall
between the top and bottom
boards, and 2 ″ lattice strips on top of the plywood for the battens)