The works remain unpainted, but show heavy
burnished surfaces which recall expressionist brush strokes on a canvas.
Not exact matches
Basically, you need to
burnish the design, remove the protective Backing Paper, adhere to the
surface,
burnish again, and then remove the Transfer Tape (shown).
* Derwent studio pencils * Colourless blending or
burnishing pencil * Navy blue Windsor Universal paper * Fine pencil eraser with brush tip * White carbon trace down paper: this is so I can transfer my drawing to the paper
surface (you may also use a white pencil to sketch with, but be aware of not pressing too hard and creating indentations in the paper
surface, or by leaving eraser marks on the
surface if needing to correct your structure).
Inspired by the landscapes of the nineteenth - century Hudson River School of painting, yet entirely modern and full of contemporary resonance, Hannock's rich
surfaces are built up of layers of modeling paste, pigments, and coats of resin,
burnished to a sheen and often concealing hidden layers of meaning; writing, notes, magazine articles and other texts in the undercoat.
There, the flat frontal
surfaces are
burnished and reflect the changing position of the sun.
Natural and artificial light from above helps recall the outdoor setting planned for the largest work, and it plays off the
burnished or rusted
surfaces that Smith finally came to prefer.
In addition, the spots disrupt the
surface sheen that comes from
burnishing the graphite - infused clay, attesting to its actual rather than virtual depth.
This is especially clear in a new series of
burnished graphite works in which tiny white spots resulting from air bubbles in the gesso result in overall patterns.Not only the spots but also their distribution and the texture they give to the
surface are the beyond the artist's control.
Although the
surface is lustrous and
burnished by sanding, there is also a cobbled - together, worn, and wobbly quality to the object.
Candlelight is ultra-soothing when softly reflected against
burnished metal
surfaces.
Basically, you need to
burnish the design, remove the protective Backing Paper, adhere to the
surface,
burnish again, and then remove the Transfer Tape (shown).
The only caveat to be aware of when sanding your painted
surface — is that sometimes people will over sand - and begin polishing and
burnishing their paint.
Using metallic paints, I can create a rich, mottled,
burnished bronzey
surface.
«
Burnishing» the paint really brings this gorgeous color to the
surface.