The other two parts shared by iLab Factory reveal little information, with the home
button flex cable appearing essentially identical to the previously seen part except for a part number change from 821-1684-01 to 821-1684-02.
The latest high resolution pictures of a purported home
button flex cable of the next iPhone hints at that possibility once again.
Not exact matches
The alleged defect involves a
flex cable connected to the phone's power
button, the «premature deterioration» of which «causes the power
button to become harder and harder to depress until eventually it becomes entirely unresponsive,» according to the complaint.
As noted by MacRumors, the round flash module is integrated into the rumored iPhone 6
flex cable, which connects to a microphone, a logic board, and the Power
button.
The
flex cable for the Power / Volume
buttons on the iPhone 6 has been one of the most oft - leaked parts, and yet, the 5.5 - inch variant has been relatively quiet on that particular front.
The repair shop has obtained the entire front side of the iPhone 5, which includes the display assembly,
flex cables, the front - facing camera, several sensors, and the Home
button.
The images show the front panel of the device, with all usual holes,
buttons and the
flex cable to connect to the motherboard.
The
flex cables also show that the Power
button could be bigger on the iPhone 6, which would coincide with some previous rumors.