According to the automobile maker, a defective sensor in models manufactured in 2007 and 2008 may
cause hydraulic pressure to build in the braking system.
The lack of fluid will
cause the hydraulic pressure in the system to drop and you may notice the steering becoming a bit more stiff when turning the wheel.
Not exact matches
Indeed, a shortage of accessible natural gas threatens to
cause more manufacturing losses in the region, where the state has banned shale gas production via high -
pressure hydraulic hydrofracturing.
You have
hydraulic lifters they take oil
pressure to work.They will take up the slack that is
causing the noise.
If the transmission cooler lines have been pinched or crimped, excess pump
pressure can
cause the converter to act like a
hydraulic ram, continuously jamming the crank forward.
Another possibility is an internal
hydraulic leak in transmission seals
causing pressure to apply both reverse and forward gears at the same time, lock up the transmission and...
When this is not pumping fluid properly, this can
cause the power steering pump to fail due to a lack of
hydraulic pressure.
The transmission pump may seize
causing a loss of
hydraulic pressure.
Hydraulic pressure makes each pulley wider or narrower,
causing the belt to ride higher or lower in the pulley and changing the gear ratio.
A leak in the
hydraulic system can
cause the Ford brake caliper to operate less efficiently, leaving it without enough fluid
pressure to
cause the brake pads to move into contact with the brake disc, or to retract away from the disc when the brake is released.
Also see Steel Braided Hoses Brake Lining Material: A composite of matrix binder, metallic or ceramic particles and friction material that also coats the disc surface Brake Pads: The pad consists of a steel backing that fits into the locking mechanism of the calipers and a layer of about 10 mm of friction brake lining Brake pistons: Is a
hydraulic actuated piston that transfers the
hydraulic pressure from the master brake pump to
cause the brake pad to bind with the disc.
Both brake types use a
hydraulic braking system as well as a brake pad or brake shoe to create friction and
cause a vehicle to stop when the driver applies
pressure to the brake pedal.
140,067 Chevrolet Malibus from the 2014 model year and equipped with the 2.5 L four - cylinder are being recalled due to the
hydraulic brake booster failing and
causing a driver to put more
pressure on the brake pedal to stop the vehicle.
The braking system in your vehicle uses a pressurized flow of
hydraulic fluid to apply
pressure to a piston in the Chrysler brake caliper,
causing it to squeeze the brake pads into contact with the brake disc.
Instead, Schaeffler's latching valve is activated by a
hydraulic pressure pulse before the engine stops, which
causes a small volume of pressurized oil to be stored in one of the transmission «s switching elements for the subsequent start - up operation, thus allowing a more rapid closure and helping to ensure that the vehicle has the necessary acceleration capability.
The method combines a new form of horizontal drilling with
hydraulic fracturing — more commonly known as fracking GThe process blasts open fissures in underground shale - rock formations by injecting a high
pressure combination of fluids, chemicals and proppants
causing the fossil fuel to flow to the production well.
Although he pressed the «safe stop» button to turn it off, stored
hydraulic pressure caused a large paddle wheel to descend and the man was crushed to death.