Our study is focused on the use of interior closed -
cell spray foam insulation at a building in Toronto without supplying conditioned air to any of the wall cavities.
These homes feature open -
cell spray foam insulation that reduces air leakage and allows for smaller - sized HVAC units.
The R - value is higher in closed -
cell spray foam insulation — this type of insulation is both an air and moisture barrier.
Additionally, closed -
cell spray foam insulation lends strength to the walls and roof.
Closed -
cell spray foam insulation was added to the interior of the rim joist and foundation wall, and also over the existing slab.
The walls consist of 1 1/2» XPS rigid insulation and R - 19 cellulose insulation in the stud cavities, with 2» of closed -
cell spray foam insulation at the rim joist.
The slab is insulated with 2» XPS rigid insulation under slab and the rim joist is insulated with closed -
cell spray foam insulation.
It features an unvented roof with open -
cell spray foam insulation and vapor retarder paint or coating, or alternatively, closed -
cell spray foam insulation in rafter cavities, and asphalt shingles.
pEUI: 13.7 kBtu / sf / yr Air Leakage: 0.65 ACH50 Better Than Code: 74 % HERS Rating: 39 Grid - tied Solar Electric System, Solar Hot Water System Plumbed, Radiant Floors, Hydro Air System, Energy Recovery Ventilator, Open & Closed
Cell Spray Foam Insulation, Rigid Insulation, ENERGY STAR Certified
Not exact matches
The slab is insulated with 2» XPS rigid
insulation under slab and the rim joist is insulated with closed
cell high density
spray foam insulation.
His earlier versions of the Perfect Wall relied mainly on screwing rigid
insulation to the outside of the structure or using closed
cell spray foam.
Cons: the health risks are potentially very high, ALL
spray foams contain toxic ingredient Isocyanate (even those that have a percentage of soy and claim to be «eco»), because the material is so rigid closed
cell systems tend to develop cracks in the material compromising the insulative envelope, many people on RV blogs are opening their walls to remodel and finding a pile of pulverized
insulation in the cavities, if the ratio of parts A and B aren't mixed exactly right, the material can off gas toxic fumes perpetually, a code approved fire barrier must be installed over
spray foam in living spaces (such as 1/2» drywall).
Roof Assembly: R - 60 (nominal) vented attic: existing slate shingles, underlayment, and board sheathing; in knee wall and at sloped ceilings, 1» layer of polyisocyanurate rigid
insulation between rafters, held away at least 1» from board sheathing, covered with closed -
cell spray foam; attic above flat ceiling has deep layer of cellulose.
Wall
Insulation: Fully advanced framed structure; R - 25 wall with R - 20 open
cell spray foam and 1» foil faced polyisocyanurate sheathing.
Roof
Insulation: Unvented roof with 8.5» R - 30 open
cell spray foam and fully adhered waterproofing membrane under a standing seam metal roof.
The house, a meager 172 square feet and insulated with two inches of closed
cell -
spray foam insulation, has proven inexpensive and effortless to heat — assuming everything is working properly.
For the
insulation, the builder used blown cellulose and closed
cell spray foam on the exterior walls making the home extremely affordable to heat & cool.