Many of these steps, including the first three listed above as well as open
circuit voltage tests, were conducted on earlier devices; but Samsung says the testing is now «enhanced,» and will be conducted with increasing frequency.
Only an open
circuit voltage test can perhaps be performed without emptying the trunk.
Not exact matches
In general try to avoid doing a
voltage drop
test on any
circuit when one lead isn't connected to the battery.
Tested electrical characteristics, such as
voltage, resistance and phases in
circuits, using voltmeters ohmmeters and phase rotation indicators.
Test, frame and set poles; string electrical power lines, install cross arms and anchors, install and replace switches /
circuit protection equipment / insulators / meters / streetlights; hang and energize transformers; take
voltage readings and preform phasing
• Develop thorough understanding of contract plans and specifications including one - line diagrams, cable and conduit schedules and ladder / loop diagrams • Install and repair electrical systems, wiring, fixtures, motors per plans • Supervise and assign work to helpers • Diagnose problems, check current leakages and work with varied
voltages to fulfill client's power source demands • Follow workplace safety guidelines while maintaining a safe and clean work area • Install relays, switches,
circuit breaker panels and grounding leads •
Test continuity of start - up systems and
circuits using ohmmeter and oscilloscope • Handle terminations in keeping with color codes • Take necessary corrective actions to eliminate safety risks • Inspect helper's work for compliance with plans • Cut and install electrical conduits utilizing proper hand and power tools • Twist and solder wires together and apply terminal caps