Sentences with phrase «coat of poly do»

I have a question... what does the buffing before the final coat of poly do?

How many coats of the poly did you do?

Not exact matches

It took about three days — one to lay and stain — the second day in the morning we put on the first coat of poly, a few hours later did the second coat and the third before bed.

Do first coat of poly on the counters, second coat on the cabinets and then second coat of poly on the main wood floor.

Just painted top of my table gray and also do not want to use a poly coat.

I typically don't sand between coats of poly, and it turns out with a great finish.

I then decided that instead of wax, I would do a top coat of Minwax water based poly.

gave two coats and then distressed the edges and some of the details and then instead of waxing over it I did a Minwax water based poly that goes on easy and clear.

If you used a brand that allows you to do this (Annie Sloan is one) you can paint another coat over the wax, then seal the fresh coat of paint with poly.

This did not happen to me with a sample that had the dark wax over 1 coat of clear wax (which itself was over two coats of poly), but I don't want a dark wax look for these chairs, so I am just wondering if I should be trying something different to get this white wax to stick.

If you're sealing with a poly, sometimes mixing a bit of poly with the paint and doing a final coat before sealing it with straight poly will help with that.

- The hardwood guys came back yesterday to do the final coat of poly on the wood, but used the wrong sheen (matte instead of high - gloss).

We didn't use a stain on the countertops; we just sealed it with a no - color poly and then used Waterlox (a food - grade sealant) and put multiple coats on of that.

We just did this in our living room that was 533 sq feet and did it for less than $ 500 (including the wood, liquid nail, stain, nails, all the tools, and 4 coats of expensive poly).

Do you sand the last «Ok, this thing is done» coat of poly?

I will also put a coat or two of poly - urethane over the top when done.

gave two coats and then distressed the edges and some of the details and then instead of waxing over it I did a Minwax water based poly that goes on easy and clear.

Even though the stain did contain poly, we added two coats of clear poly as well for an extra strong finish.

I didn't use anything special at first, but I eventually sanded off the wax, put a fresh coat of paint, and sealed it with poly.

I then decided that instead of wax, I would do a top coat of Minwax water based poly.

(Again, I am only suggesting this since I do not have a photo and you stated there are «lots of poly coats.»)

(7) At least two coats of poly is needed for all three, but the color surely does pop when the poly is applied.

Just painted top of my table gray and also do not want to use a poly coat.

Because we were leaving the pine trim as it was (plus a couple of coats of poly acrylic) I did the same with the upper kitchen cabinets to keep the whole house looking cohesive.

Did you have to put a coat of poly on it or did you just stain iDid you have to put a coat of poly on it or did you just stain idid you just stain it??