Sentences with phrase «coat of poly on»
Cy got up at 3:30 am this morning to put the second coat of poly on the floors.
http://www.beneathmyheart.net/
Did you have to put a coat of poly on it or did you just stain it??
- The hardwood guys came back yesterday to do the final coat of poly on the wood, but used the wrong sheen (matte instead of high - gloss).
Do first coat of poly on the counters, second coat on the cabinets and then second coat of poly on the main wood floor.
Not exact matches
And the corners are rounded to reduce the risk of injury, poly coated on the outside to protect the exterior
It took about three days — one to lay and stain — the second day in the morning we put on the first coat of poly, a few hours later did the second coat and the third before bed.
The top is sealed with three coats of wipe on poly.
gave two coats and then distressed the edges and some of the details and then instead of waxing over it I did a Minwax water based poly that goes on easy and clear.
We didn't use a stain on the countertops; we just sealed it with a no - color poly and then used Waterlox (a food - grade sealant) and put multiple coats on of that.
When I redid my old wood floors the suggestion for the poly was to put two coats of glossy poly on, followed by a coat of satin.
I applied 3 coats of chalk paint on a test section, and when I applied my first coat of poly and some of the paint is lifting and I can see the original color underneath.
Sometimes... depending on the piece... I will also seal it with a coat of poly or varathane after washing to give it some added freshness while sealing in some of it's «patina»
Once the poly was dry, I painted on a coat of watered down, water based paint (Sherwin Williams «Alabaster»).
A coat of Poly (My favorite Poly Used here on a Two Toned Side Table and here on a French Provincial Hutch).
gave two coats and then distressed the edges and some of the details and then instead of waxing over it I did a Minwax water based poly that goes on easy and clear.
From there I put on five separate coats of poly acrylic.
I have never put wax on my furniture before, only SPRAYED several coats of poly....
The wipe - on is thinner than regular poly, so it dries quicker — I like the wipe - on because its easy, and MOA free... but because of this, I'd apply a minimum of 3 coats — no brainer because it will go very quick.
Over that I rubbed one coat of wipe on poly.
Commercial grade, food safe, glossy or matte depending on your tastes, durable as heck... and though it takes some know - how, probably not all that much more labor intensive than brushing on several coats of poly.