I made sure to put
a coat of polyurethane on it to protect it from any splashing that might occur.
After
a coat of polyurethane on Wednesday, the bench really came to life.
Then, put a third, and final,
coat of polyurethane on the stairs.
Many people after having lacquered kitchen cabinets for a little while applying several
coats of polyurethane on top to protect the lacquer.
It's custom - stained to match the interior floor and has a zillion
coats of polyurethane on it.
Not exact matches
I would probably use a couple
coats of polyurethane / polycrylic
on a table top, but I've used wax
on my chalk painted kitchen cabinets and they have held up great.
A few weekks ago I set my pumpkins out
on the porch after giving them two
coats of polyurethane.
Surfboards are
coated with
polyurethane or epoxy resin and sanded down to be smooth which makes them naturally slick and glide
on the surface
of the water.
Tit, a sad little form made
of scrap materials
coated with a pale
polyurethane skin perching
on a worn aluminum stool, greets visitors to the Atlanta Contemporary Art Center's Be Here Now.
He also went easy
on the protective
polyurethane coating, only applying it to high - use areas like the kitchen to reduce the amount
of VOC's.
Made from fail - safe, temperature - controlling circuitry covered in a 360 - degree thermoplastic
polyurethane (TPU)
coating, the Charge Stream Pad + comes in your choice
of matte black or white so it looks fantastic
on your desk or nightstand, no matter your decor.
Paint
on one
coat of Satin - Finish
Polyurethane.
We finished by painting
on a
coat of Miniwax Special Walnut colored stain, and once that was dry, we sprayed
on some
polyurethane to seal everything up.
We stripped it and put
on a few
coats of polyurethane to help protect it and make it easier to clean.
When you were putting
on your first top
coat of polyurethane did you use a brush and then a roller for the next three
coats?
I would probably use a couple
coats of polyurethane / polycrylic
on a table top, but I've used wax
on my chalk painted kitchen cabinets and they have held up great.
A couple
of brushed
on coats of outdoor
polyurethane.
I cut it up in rectangles, glued it down about a 1/2 inch apart
on my pre painted floor (grey), then put 4
coats of polyurethane, lightly sanding after each
coat.
Step 4) Spray 2
coats of Minwax 33050 Fast - Drying
Polyurethane Aerosol, Gloss Finish
on the top
of the table top.
It required three
coats of the
polyurethane stain and sealer
on all sides and edges
of the barn board.
I gave at least 4 hours
of drying time in between each
coat and waited 7 days for the
polyurethane to fully cure before setting anything
on the furniture.