Sentences with phrase «coat of primer»

I just made sure to use a couple good coats of primer first!

Any brand of paint is good as long as you have at least 2 light coats of the primer on.

We almost finished with the first coat of primer before heading to church.

That was followed by a cleaning and a good coat of primer inside and out.

After drying, give any knots in the wood a second coat of primer.

That last kitchen looks like they got one coat of primer over dark cabinets and didn't finish the job.

After choosing a safe primer and paint for your bird cage, apply a thin coat of the primer.

I was worried about getting the paint to stick so I used a thick coat of primer.

The bench took two light coats of primer, and then two light coats of chalk paint and it was fully covered.

I thought I had seen step - by - step instructions on your website explaining how many coats of primer and paint, but I can't find it now.

Was one coat of the primer enough to cover the black paint?

This little area requires a few extra coats of primer to cover up this egg yolk looking horror!

Apply one coat of primer followed by a coat of paint in the colour of your choice.

I am thinking I should probably do one more coat of primer and then I can move on to paint.

I added two coats of primer on the surface that I intend to paint white before moving on.

After all of that, the wood got a second coat of primer.

Here is what the shutters looked like after one thin coat of primer.

Give your entire surface a good coat of primer.

The chest of drawers was painted with a thick coat of Primer Red first, and then Lem Lem.

First I taped it off and then covered the inside and have it a quick coat of primer then gloss paint, both spray versions.

If it's just a tiny spot that's bleeding, I usually just spray the spot with a couple coats of Shellac, but if you're getting bleeding in several areas, it's best to just brush on a couple coats of primer on the whole piece before you continue painting.

I also sanded between coats of primer on the banister handrail area because it felt kind of rough and yucky.

It required painting the entire room, having to use several coats of primer because the stain bled through.

So the inside needed about 3 coats of the Decorators white (yes, even after three coats of primer because it hated me) and then the outside I did Sherwin Williams, Black Fox.

Here they are today, after giving them a couple of coats of primer paint (to completely cover the red» ish stain) and brushing on gray stain.

Then give it a few coats of primer to seal in the tannins and paint.

You should apply a thin coat of primer from your eyelids all the way to under your eyebrow.

Mechanically speaking, last year was good but I felt that the systems in place were just a fresh coat of primer and the developers forgot the paint.

While I wanted to rip it out and start over, I was able to prolong its life with a simple coat of primer and paint.

We used shiplap in parts of our home and painted 2 coats of primer under our white paint.

I am hoping to at least get a couple of coats of primer down on our old lino in time for the reveal next week.

Using a paint roller, add an even coat of primer, leaving a two - inch unpainted border around the edges.

Two solid coats of this primer and two solid coats of Peaches «N Cream and the job was done.

A light sanding and coat of primer meant it was ready for a couple coats of White Dove (OC - 17).

Ours did two coats of primer before they painted... we'll see if that helps with the bleed factor.

If your door is now painted with water - based paint, like mine, you can choose to paint one coat of primer first, depending on the color you chose.

The chest of drawers was painted with a thick coat of Primer Red first, and then Lem Lem.

I lightly sanded using a 220 grit sanding sponge in between coats of primer.

After the second coat of primer has dried overnight, use Washi tape to create two stripes on the jars.

It's then given several coats of primer (very often a white acrylic primer called gesso) to seal it and prevent the oil from the paints soaking through the surface.

How many coats of primer did you use?

I am in the middle of 2 coats of primer over a dark red in my entry way... yikes!

I can get a first coat of primer on while my 2 year old is eating a snack and watching tv before Kindergarten pick up.

Once that dried I went over those spots with a light coat of primer and used four coats of Sherwin Williams Alabaster white to give it a nice white finish.

3 Give the taped - off section a good coat of primer; let it fully dry.