Sentences with phrase «coats of primer»

Holding the can approximately 30 cm away from the metal frame, apply up to two coats of primer, leaving at least four hours between each coat.

The bench took two light coats of primer, and then two light coats of chalk paint and it was fully covered.

We did get two coats of primer up on all of the walls and the ceiling.

Once you've given the coasters a few coats of primer, paint them white.

When covering existing medium - dark finishes, at least 2 coats of primer is recommended.

I just made sure to use a couple good coats of primer first!

Then you paint two coats of the primer / base color.

Here they are today, after giving them a couple of coats of primer paint (to completely cover the red» ish stain) and brushing on gray stain.

Two coats of primer, two coats of paint, 2 - 3 coats of sealer is usually what I will do.

I then used a 120 grit paper to prep for priming, and in between each of the two coats of primer.

Two solid coats of this primer and two solid coats of Peaches «N Cream and the job was done.

I lightly sand in between both coats of primer, as well as both coats of paint, using added pressure to the edges for a distressed look.

Tired laminate countertops were refreshed with an electric palm sander and coats of primer, paint, and polyurethane.

You know, the one that will take 2 coats of primer and 5 coats of paint to cover.

We used Kilz 2 and did two or three coats of primer, sanding lightly with 400 grit before the first coat of paint.

This then led to applying two coats of primer and then applying another coat of milk paint only to run out.

I thought I had seen step - by - step instructions on your website explaining how many coats of primer and paint, but I can't find it now.

I've got two coats of primer on and one coat of SnapDry.

We did two coats of primer and two coats of paint.

The photo above shows what it looks like after two coats of primer, two coats of paint, and two coats of glossy sealer.

I sanded every piece of mill work myself and lovingly applied two coats of primer and three coats of high gloss paint.

I am hoping to at least get a couple of coats of primer down on our old lino in time for the reveal next week.

We sprayed 2 coats of primer and 2 coats of paint with our trusty Graco Truecoat Plus II and the finish was SMOOOOOOTH.

Be sure to sand down the wood and use 2 coats of primer first)

It required painting the entire room, having to use several coats of primer because the stain bled through.

They actually go up lickety split thanks to our nail gun, I just wish the four coats of primer / paint that has to go on them first went a little more lickety split - ish!

Ours did two coats of primer before they painted... we'll see if that helps with the bleed factor.

Any brand of paint is good as long as you have at least 2 light coats of the primer on.

When Layla and Kevin were here, the crew used a paint sprayer and got the job done very quickly with a couple coats of primer and paint.

I feel your pain...... painting woodwork was brown, doing white 2 coats of primer and 2 coats of white.....

The rest of my house had (some still has) dark - stained trim as well and it took me 2 coats of primer and one coat of paint.

The panelling then required two coats of primer to help prepare and protect the wood, followed by two coats of the paint to finish it off.

This metal shed is protected from rust and treated with three coats of primer and polyester paint on the inside and out.

We used shiplap in parts of our home and painted 2 coats of primer under our white paint.

After two coats of primer its time for paint.

I lightly sanded using a 220 grit sanding sponge in between coats of primer.

So after two coats of primer, and two coats of Citronette.

Then apply two coats of primer to the MDF and sand smooth after each coat.

It's then given several coats of primer (very often a white acrylic primer called gesso) to seal it and prevent the oil from the paints soaking through the surface.

I would do a couple coats of primer right over the existing paint, paint again, then seal:).

So after two coats of primer, and two coats of Citronette.

This one definitely needed like three coats of primer to fully cover the black paint.

You should apply a thin coat of primer from your eyelids all the way to under your eyebrow.

When it's dry, apply a coat of primer and two coats of the white roof paint with a long - handled roller, allowing the layers to dry after each application.

After drying, give any knots in the wood a second coat of primer.

The chest of drawers was painted with a thick coat of Primer Red first, and then Lem Lem.

After the second coat of primer has dried overnight, use Washi tape to create two stripes on the jars.

I was worried about getting the paint to stick so I used a thick coat of primer.

Once that dried I went over those spots with a light coat of primer and used four coats of Sherwin Williams Alabaster white to give it a nice white finish.

I removed the doors and sanded both the boxes and doors, used one coat of primer and two coats of paint.