It required three
coats of the polyurethane stain and sealer on all sides and edges of the barn board.
Not exact matches
Then I applied a dark walnut
stain and a few
coats of polyurethane to seal it.
Once your
stain has cured you can add a
coat of polyurethane to finish off your board.
We finished by painting on a
coat of Miniwax Special Walnut colored
stain, and once that was dry, we sprayed on some
polyurethane to seal everything up.
-LSB-...] now four weeks, three
coats each
of stain and
polyurethane, two
coats of wall paint, a DIY backsplash experiment, a tube
of caulk, and just $ 130 later (I'm totally high - fiving myself for that), here's the -LSB-...]
It's custom -
stained to match the interior floor and has a zillion
coats of polyurethane on it.
After the last
coat of stain was dried I applied three additional
coats of clear
polyurethane finish (sanding in between
coats).»
I applied two
coats of stain and then finished it off with a light
coat of polyurethane.
We actually used 2
coats of polyurethane over the
stain.