Applying two
coats of wax took less than two hours.
Not exact matches
It bothered me because I knew he would be putting his feet on the chair rungs so I
took a chance and put two
coats of General Finishes Flat top
coat on the rungs over the
wax.
All it
took was one
coat of paint, a quick sanding to distress, and a layer
of clear
wax.
No. 1 Son helped out with that task, too, and it only
took a couple
of evenings to apply two
coats and a finishing
wax.
UV Resistant
Coating Each Rear Deck Spoiler contains is finished with UV - resistant clear -
coat paint for resistance against various environmental conditions (
take care
of this as you would
take care
of your vehicle's paint finish - polish then
coat with good - quality
wax or synthetic protectant).
Well, it didn't
take long after two
coats and a brush
of clear / dark
wax to richen this hue up to all it's potential!!!
Since I already had 3 solid
coats of Chalk Paint ® and had
waxed the dresser a few days ago, I
took a pad
of sandpaper with an aggressive grit
of only 80 and sanded the flat surface aggressively in the areas to reveal more
of the colors beneath and the wood base.
While they were drying, I
took some patriotic sheet music I printed off
of a free website and rubbed them with a light
coat of Annie Sloan dark
wax....