Sentences with phrase «combustion systems»

Responsibilities: • Collaborated with engineering team in the design and development of gas turbine combustion systems advanced technology.

If gas turbines are used for backup, startup time is about 30 min from dead stop, less from a low load situation where fuel consumption and emissions are low, less for combustion systems.

By optimizing the combustion systems with regard to the charge movement in the combustion chamber as well as the geometry of the combustion chamber, the mixture formation can be further improved.

How CHP works is by using the heat that would otherwise be wasted in exhaust gases from fossil combustion systems, such as flue gases from a coal - or biomass - fueled boiler or exhaust from a gas turbine or reciprocating engine, to produce steam and / or hot water for various industrial or commercial needs.

More than 100 iterations of the combustion systems were evaluated through computer modeling before a final design was selected for each engine variant.

Advanced compression ignition combustion systems — Control the complex pressure - temperature - time history within the combustion chamber to enable and extend low temperature combustion operation.

All engines get redesigned combustion systems, with gas direct - injection, continuously variable valve timing and cylinder deactivation, which GM calls Active Fuel Management.

I've always been interested in automotive combustion systems.

The Fossil Energy R&D program would substantially scale back most activities, including carbon capture and storage pilot projects and R&D on advanced combustion systems, re-focusing exclusively on exploratory technology activities in hopes that industry will take on greater responsibility across the board.

«We start by developing a single - cylinder engine to test combustion systems for our future [road] sportscars.

Although the CHARLES solver was developed to tackle problems like high - fidelity jet engine simulation and supersonic jet noise prediction, it had never been applied to predict combustion dynamics in a configuration as complex as a GE gas turbine combustion system.

New floating devices allow this multipurpose air - water microrobot to stabilize on the water's surface before an internal combustion system ignites to propel it back into the air.

This advanced combustion system utilizes low - cetane fuels (derived gasoline and naptha blends) that are easier for the energy companies to produce than pump gasoline or diesel.

It is important to have a basic knowledge about spark plugs and combustion system of a vehicle.

The all - new lightweight, downsized 2.0 - litre Si4 petrol engine employs the latest generation of high pressure direct - injection technology, together with low - inertia turbocharging and twin independent variable valve timing, to create an exceptionally efficient combustion system.

It also combines direct injection and continuously variable valve timing to support an advanced combustion system.

This increase is due in part to a pair of plugs per cylinder, an increased compression ratio, an improved cylinder - head port flow, and a new combustion system.

Among the highlights of the four - cylinder engine are its direct - injection system with exhaust gas turbocharging, an enhanced combustion system and extended stratification ranges for lean - burn operation using fast - acting injectors for the multiple fuel injections, and multi-spark ignition according to need.

The Jeep Grand Cherokee's available Flexible - fuel Vehicle (FFV) 4.7 - liter V - 8 engine incorporates electronic throttle control, two spark plugs per cylinder, increased compression ratio, improved cylinder - head port flow and a new combustion system.

During the engine warm - up phase, the combustion system employs multiple injection mode strategies to deliver 50 percent more heat for fast catalyst warm - up and reduced emissions.

At the core of the new EcoTec3 engine family is an advanced combustion system that maximizes the potential of the direct fuel injection system, cylinder deactivation, continuously variable valve timing and other technologies.

For example, when towing a trailer on a hot summer day, Silverado and Sierra's combustion system can reduce the need to trim back spark advance to control detonation, helping maintain both performance and real - world fuel efficiency.

The pistons also feature a reinforced top ring and integral combustion bowl design that's an integral component of the combustion system.

Less fuel is required to produce the equivalent horsepower, especially at normal cruising speeds, of a conventional port - injection combustion system.

These technologies support the all - new, advanced combustion system, which incorporates a new cylinder - head design and a new, sculpted - piston design that is an integral contributor to the high - compression, mixture motion parameters enabled by direct injection.

The new LT1 engine's high output, and high power density and efficiency are due to several advanced technologies, including direct injection, Active Fuel Management and continuously variable valve timing, which support an advanced combustion system.

Chevrolet Performance engineers developed the high - performance camshaft - and - cylinder - head package in - house, leveraging the design elements of the LT1's advanced combustion system to channel airflow through the optimized cylinder head ports.

Friction reduction improvements, along with ignition and fuel injection improvements found on the upgraded Pentastar V - 6 are all part of the specially adapted hybrid Pentastar engine, while two - step valve lift and cooled exhaust gas recirculation have been removed with the addition of the Atkinson cycle combustion system.

Based on the newly upgraded Pentastar engine architecture, the new hybrid engine features an Atkinson cycle combustion system for improved pumping efficiency without compromising vehicle performance, due to its hybrid electric motors working in tandem with the engine when full load performance is required.

High pressure direct injection, low - inertia turbocharging and Twin - independent Variable Cam Timing (Ti - VCT) all help to create an advanced combustion system which brings new levels of performance and fuel efficiency to Ford's petrol engines.

The new combustion system features improved knock resistance and higher flowing intake and exhaust ports in the cylinder head which help increase efficiency, power, and torque.

GM proprietary computational fluid dynamics (CFD) analysis techniques were used to develop an all - new combustion system with a higher compression ratio.

The Gen V engine family delivers greater efficiency, performance and durability thanks to a combination of advanced technologies such as direct injection, Active Fuel Management (cylinder deactivation), and dual - equal camshaft phasing (Variable Valve Timing) that support an advanced combustion system.

If your Infiniti fuel filter becomes really clogged, you probably won't be able to start your vehicle, as it simply will not be able to allow the fuel your combustion system needs to pass through it.

The new combustion system developed with GM's proprietary computational fluid dynamics (CFD) analysis software features a higher compression ratio which helps improve fuel efficiency and has improved knock resistance.

To help boost fuel economy, the engine has technologies such as direct fuel injection, continuously variable valve timing and an advanced combustion system.

This engine uses direct injection, continuous variable valve timing, active fuel management and advanced combustion system.

With a highly efficient combustion system, the new engine provides excellent torque at low rpms, enabling less frequent gear change.

It helps that the Corvette team put in serious work, too: The engine alone underwent more than 10 million hours of computational analysis, including more than 6 million hours on the combustion system.

At full load, the injection has a crank angle interval from 15 to 50 °C A depending on the combustion system.

The CT is able to reach full generating capacity in 10 minutes with guaranteed 15 ppm NOx and 25 ppm CO emissions from its dry low - emissions combustion system design.

• Applied computational methods in combustion system analysis.

• Validated Aerothermal performance through laboratory testing of combustion system.

Not exact matches

The basics: The water injection system reduces the consumption of combustion engines and increases performance.

LEIPZIG / FRANKFURT, Germany, Feb 27 - German cities can ban the most heavily polluting diesel cars from their streets, a court ruled on Tuesday, a move that could accelerate a shift away from the combustion engine and force manufacturers to pay to improve exhaust systems.

Instead of the tiny explosions that drive the pistons of a standard internal - combustion engine, the Stirling drives its piston by forcing gas from one chamber to another in a perfectly closed system.

Eclipse Inc., a third generation family owned company founded in Rockford, Illinois 106 years ago, is a global leader in the manufacture of gas combustion components and systems for industrial heating and drying applications.

For hypersonic speeds of Mach 5 or above, another type of propulsion system would be required, in which combustion would happen differently.

To reach hypersonic speeds, current systems will need to be replaced by what engineers call «air - breathing» systems, which could be achieved by scramjets (also called «supersonic - combustion ramjets»).

In the other systems, when a rocket carries its own fuel, it also carries with it the oxygen needed for combustion in airless space.