Sentences with phrase «con rods»
"Con rods" is a short term for "connecting rods," which are important components in a car's engine. They connect the piston to the crankshaft, helping to convert the up-and-down motion of the piston into rotational motion of the crankshaft. Full definition
Agreeing with @Zaid on con rod deformation.
mechanics.stackexchange.com
It also features titanium con rods and carbon - fiber intake plenums.
If the knocking is a low pitched thud, then it could be coming from the crankshaft / con rod bearings.
Little of the FQ - 320's engine remains; the cylinder block is a high - strength HKS design, as are the big - end bolts and forged con rods, which are topped by Omega forged pistons.
Hydrolocking could cause con rod deformation, which may explain why one cylinder isn't reaching TDC.
They also installed a 96 mm stroke crankshaft and 157 mm long con rods and the compression height of the piston was 30 mm.
Although the basic design of the engine was similar, it was actually quite different internally: it used a different crankshaft, had larger bearing journals with cross bolted caps, different con rods, and different pistons.
In addition to the increased displacement (via a longer stroke), the Superfast's engine features a new crankshaft, new con rods, a new piston design, and a more robust crankcase.
The engine wasn't left alone either: displacement was bumped from 5.7 to 6.0 litres, with fancy new parts like titanium con rods and a lighter crankshaft added into the mix.
You can also get a similar noise when the inside of the piston hits the con rod if the rod is bent after damage such as sucking in water.
The company promptly discovered a problem with a con rod bolt possibly working loose on some engines.
An engine with 3 moving components (crankshaft, con rod and piston) is probably not tweaked for fuel consumption.
Its crank is forged, its con rods are titanium and its valve train is upgraded.
An all - new development, the eight - cylinder unit powering the RS 4 includes such features as modified pistons and con rods, a new crankshaft together with its bearings, and new cylinder heads.
The S3 model seen here features a pumped - up version of the 2.0 TFSI that has been thoroughly overhauled compared to the version available in the regular A3; among the beefed up components are the con rods, pistons and rings which quash a lower compression ratio of 9.3:1, the block and cylinder head castings, the valvetrain, and the turbocharger.