Always
connect jumper cables to the dead battery first, then to the good battery.
I assumed a car from 2003 would have fuses to prevent totaling your car by
connecting jumper cables wrong but the mechanic said otherwise.
It is important to remember that
connecting the jumper cables in the wrong order or attaching the spring clamps in the wrong location can damage expensive electrical components and even cause an explosion.
Not exact matches
They
connected their diagnostic tool - a box about 12» x 8» x 2» with a crappy LCD on the front and some arrow buttons - via its attached
jumper -
cable - like - things.
One article I read suggested that the amount of electronics
connected to the battery in a modern car could result in damage from any kind of transient during a
jump - start, and another article I read on how to
jump - start a car had a large warning that read «If either vehicle has an electronic ignition system or is an alternatively fueled vehicle, the use of
jumper cables may damage it.»
I used
jumper cables to
connect from battery of Sienna and
connected to battery terminals to Tacoma to provide power to roll up windows.
to disconnect the
jumper cables in the reverse order that they were
connected.
When you
connect your Blu - ray player or
cable box, not only will the TV
jump to the right input and label it correctly, it will program the remote to cover advanced functions like fast - forward, track advance, and pulling up the on - screen guide.