Sentences with phrase «connecting rod»

After a number of engine failures, it was discovered that the supplier of the connecting rod bolts had made a production error in the alloy of the bolt.

On the opposite end of the connecting rod, a smaller hole is precisely drilled.

The use of high strength steel contributes to the connecting rod's slender shape and results in a 50 percent increase in fatigue resistance for a long lasting engine.

The design allows for the elimination of connecting rod bolt pins, since the connecting rod bolts can be precision machined to fit the cap to the rod.

This engine was created because it was necessary to build an engine using available parts; connecting rod bearings are very difficult to find for the narrower connecting rods commonly found in this engine.

A worn connecting rod bearing will produce a metallic, cyclic knocking noise from the engine and possible engine failure.

Also, the compression ratio in these engines increased to 10.2, they feature the new connecting rod bearings, and the intake ports have changed.

If the debris was not completely removed, oil flow may be restricted through the connecting rod bearings, causing connecting rod damage.

Ratio of connecting rod length to stroke, and 3.

Otherwise you will face problems with AVCS system, high oil consumption, connecting rod bearing failure and other troubles.

Also, having EJ257 and EJ255, you may face connecting rod bearing failure, especially after power increase.

Besides, unadjusted valves and connecting rod bearings can also knock.

Some of these gains have been made with improved sound insulation, but there's also a device that Mazda calls the Natural Sound Smoother, which consists of a special damper that sits within the engine's connecting rod pin.

Each connecting rod journal on the crankshaft carries two forged, cracked connecting rods.

The Problem: Bombardier Motor Corp. is issuing a recall on the Can - Am Spyder RT because in some cases, brakes may not work at all because a pin securing the brake pedal connecting rod could fall off, resulting in complete brake failure.

The connecting rod big end caps may have an attached scoop to enhance this effect.

The point where the connecting rod attaches to the crankshaft is some distance from the center of the shaft

The force of an explosion in the cylinder's combustion chamber forces the closed end of the piston down, causing the connecting rod to move the crankshaft

The Fix: The company will begin notifying owners today, and replace connecting rod pins on affected vehicles for free.

The connecting rod bearings will also have added stress when you do this.

Compared to Vs, boxer engines have a more complex crankshaft as they have a crank throw for each connecting rod.

An actuator link rotates the eccentric shaft, moving the lower connecting rod up or down, which in turn rotates the plate around its axis on the crankshaft.

The corresponding motion on the other side of the plate lowers or raises the lower connection point of the upper connecting rod, and therefore lowers or raises the top dead center position of the piston, effectively changing the compression ratio.

The top end of the upper connecting rod is connected to the piston in the conventional manner, and the lower end connected to one side of the plate.

Which is (probably) what happened to a buddy of mine — his engine started running rough, blowing white smoke out the exhaust, then just stopped completely with a loud bang, he thought it was a backfire but found a mess of metal pieces in the oil pan that was from a broken connecting rod.

Interestingly, connecting rod bearing load exponentiates with respect to RPM, and engine load is a much lesser factor.

I personally always considered the connecting rod to be part of the piston.

The piston is pulled down by the connecting rod attached to the crankshaft as the intake valve opens.

These catch and scoop oil and throw it into / onto places that need lube, like the cylinder walls when the piston is up, and into the connecting rod eye bearings.

Compression forces at BDC are far less an issue in terms of connecting rod / pin / piston stresses.

It can be summarized as given below making unique power circuit for mechanical power as given below: For normal driving power flows from Piston to connecting rod to main drive shaft through said AC.

That weakest link may be the valve, connecting rod, piston, or any of the other pieces in the engine.

The previous LS versions have extensive aftermarket support where builders talk head airflow statistics, rod ratios (connecting rod divided by stroke), cam durations, lift and lobe separation and inductions schemes.

In existing engines, Connecting Rod (which transmits & converts reciprocal movement of pistons to rotary movement of crank shaft & which is enabled by crank shaft geometry) is a single piece connecting piston to crank shaft.

If the bearing spins inside its home in the large end of the connecting rod, oil pressure will first go up, due to less flow of oil where there normally would be.

We a Jetta at the shop now that we suspect having a bent connecting rod.

As cool as the turbo noises are, they only partially mask the engine - there are four - cylinders that would sound better with a connecting rod poking through their crankcases.

Either the connecting rod failed and allowed the piston to travel to the top of the cylinder, or you've got some kind of foreign object (like a valve head) inside the cylinder.

So before Deutschland finally succumbs to pressure from the European Union and gains a national speed limit, before I blow a connecting rod through the block of this hyperactive homebuilt engine, and before my editors come to their senses, I'm on the phone to make travel arrangements for the Scirocco.

These different mechanics have me so worried telling me it's the catalytic converter when it don't even knock, or saying it's a broken connecting rod.

As the stroke increases the torque of the engine climbs because the connecting rod is attached further from the center - line of the crankshaft.

Advent is quality time, not because of its loquacious and crowded demands, but because it provides a time for us to receive God's word and to collaborate in its fulfillment by being the connecting rod between vision and action.

It is constructed of only two moving parts: a rotor and a drive shaft to which the rotor is directly connected, without the intercession of any rattling crankshafts, connecting rods or bearings.

Polestar is proud that this engine is straight out of the Volvo parts bins except for the forged connecting rods, while the Garrett 3171 turbocharger, CNC - machined aluminum intake manifold, and 3.5 - inch - diameter Ferrita exhaust take care of the pressurized air that helps create 508 hp @ 6500 rpm and 424 lb - ft of torque @ 5500 rpm.

The turbocharged, five - cylinder, 2.5 - litre engine has been given a larger turbo and larger intercooler, with custom - built pistons, connecting rods and camshaft just for this project.

The TLX GT benefits from an Acura - developed aero kit, has a race - oriented all - wheel - drive system and six - speed sequential racing gearbox, and a twin - turbo 3.5 - liter V - 6 that retains the stock cylinder head and block, direct - injection, crankshaft, and throttle body, and adds racing connecting rods, pistons, camshafts, and dry sump lubrication.

But the LT4 gains nearly 200 extra horsepower from stronger cylinder heads, lightweight titanium intake valves, lighter steel connecting rods, special aluminum pistons, a stainless steel exhaust manifold, and, last but not least, a 1.7 - liter supercharger that can spin at up to 20,000 rpm.

The 2.8 - liter turbodiesel truck engine sports an iron cylinder block with an aluminum dual - overhead cam head, forged steel crankshaft and connecting rods, a common rail direct injection fuel system, and a balance shaft to run the oil pump and increase smoothness.

For the Edition 507, AMG adds forged pistons like the ones fitted to the SLS AMG, new connecting rods, and a lighter crankshaft.

Further because of this increased speed piston experiences greater momentum which is harder to control at high RPM and requires stronger crank, connecting rods, piston pins, etc...