Sentences with phrase «construction adhesive»

When attaching to tile / marble, use construction adhesive since you can't nail the mantel through tile.

Use a miter saw or a hand saw and miter box to cut the corners at 45 - degree angles, and attach the moldings with construction adhesive.

You will need to cut the sheets to fit and then apply construction adhesive to the support braces.

Step 5) Spread Liquid Nails LN903 10 - Ounce Heavy - Duty Liquid Nails Construction Adhesive on the edge of the rungs where the shelves will be.

DIY Driftwood Wreath from Sustain My Craft Habit assorted driftwood pieces + construction adhesive + plywood + jigsaw + sand paper + hammer & nails

Do you think hemp oil would resist construction adhesive?

One thing I do when installing trim is use a bead of Loctite Instant Grab construction adhesive before nailing the trim.

Add construction adhesive to the back of your planks and secure them to the wall with finish nails.

See, he had been eagerly helping us measure the bead board, watched as we cut it and carried it upstairs to attach to the ceramic tile using Power Grab All Purpose Interior Construction Adhesive and was excited to see what was going to happen.

She wasn't sure if the adhesive on the back of the tiles would hold enough during bumpy travels so she decided to use construction adhesive as a bit of extra insurance.

Run a bead of construction adhesive along the contact surface of the mantel to create a stronger bond.

Working with one holder at a time, a good amount of outdoor construction adhesive was squirted onto the bottoms...

After the topcoat was completely dry, the unit was fixed to the wall with construction adhesive and a few finish nails, making a forgettable firebox the living room's new center of attention.

Apply construction adhesive to the upper portion of a wooden landscaping stake and attach the stake to the back of the cat's legs.

(If you're worried about stability, simply use construction adhesive to bond the two pieces together)

Rob Fischer, Good Weather (Glass House), 2014, glass, steel, screenprint ink, acrylic and latex paint, construction adhesive, wood floor, lights, wires, 175 x 223 x 126 inches.

Rob Fischer, Vice Versa II, 2014, glass, steel, screenprint ink, acrylic and latex paint, construction adhesive, 50.5 x 70 x 5 inches.

Rob Fischer, Architectural Backpack, 2014, glass, steel, screenprint ink, acrylic and latex paint, construction adhesive, 51.625 x 27.5 x 8.5 inches.

Rob Fischer, Good Weather (Glass House), 2014 (installation view 2), glass, steel, screenprint ink, acrylic and latex paint, construction adhesive, wood floor, lights, wires, 175 x 223 x 126 inches.

Rob Fischer, Blue Luggage, 2014, glass, steel, screenprint ink, acrylic and latex paint, construction adhesive, 46.5 x 38 x 6.25 inches.

The Temple 2006 MDF, styrofoam, plaster, papier mache, plastic fruit, plastic and metal kitchen utensils, construction adhesive, composite (metal alloy) gold leaf, and mirrors 4 sections, each part - 144.8 x 86.4 x 152.4 cm

It is going to take a lot more work to tear it out if it was screwed in place and had construction adhesive applied than if it was nailed down, for example.

I used construction adhesive and 2 1/2 ″ long finishing nails.

I'm not sure about all the specifics right off hand, but I know they used birch plywood and construction adhesive.

All you'd need are some nails, some lumber, and some construction adhesive.

We used construction adhesive and finish nails to attach the horizontal piece to the vertical slats.

(Note: The masking tape on the edges of the mantel is just there to add extra security while the construction adhesive between the seams was drying.

That's what I meant in my post the other day when I said «you could easily re-create the look by using nails, lumber and construction adhesive.»

Fasade 18 ′ x 24 ′ decorative backsplash panels can be installed with double - sided tape or construction adhesive.

(Use a nail gun and construction adhesive to attach it to the ceiling, but don't forget to cut holes for new light fixtures before you put it up!

This Lowes tutorial provides directions on how to make an outdoor fireplace around a simple fire ring kit, but you will also need some lava rock, paver base, and construction adhesive.

I want to try using wood glue instead of nails and construction adhesive.

With construction adhesive and brad nails, I applied wide plank PVC beadboard scraps to the inside of the cabinet.

These vinyl panels are easily applied with double - sided tape or construction adhesive, whichever you prefer.

Installs in a breeze with screws or nails and construction adhesives.