There's a slight power increase of 4kW on last year's model as aerodynamic performance has been improved, boosting
cooling efficiency for the engine.
Both come integrated into a newly shaped bumper offering improved
cooling efficiency for the engine bay and a lightly altered hood.
Not exact matches
Spruce Finance ™ provides financing
for residential solar and energy
efficiency improvements that may help homeowners save on power, heating and
cooling, and water.
The KMEdge utilizes a one - piece, dual - sided stainless - steel evaporator that envelops the oval - shaped copper heating /
cooling tubing, optimizing surface contact area
for optimizing energy
efficiency.
Among the environmental and sustainable practices at Saranac is the use of geothermal heating and
cooling in the warehouse and upgrading the electrical systems and the lighting in the facility
for greater
efficiency.
A number of features of
cooling systems contribute to their overall reliability, including protection from catastrophic failures, design
for energy
efficiency, and ability to handle a wide range of operating conditions.
They must think about building
efficiencies, heating and
cooling for instance, but also about product refrigeration, if necessary, and heating and
cooling in manufacturing.
They are also one of the best roofing choices
for energy
efficiency, as the air gap acts as an insulator, keeping your house
cooler in the summer and warmer in the winter.
For example, the guidelines state that reducing energy consumption could be achieved by exploring grants for energy efficiency improvements as well as by placing vegetation around buildings to lower heating and cooling cos
For example, the guidelines state that reducing energy consumption could be achieved by exploring grants
for energy efficiency improvements as well as by placing vegetation around buildings to lower heating and cooling cos
for energy
efficiency improvements as well as by placing vegetation around buildings to lower heating and
cooling costs.
Wringing the most energy
efficiency out of such cloud computing has become an important part of a company like Facebook's profitability — and
cooling all those computers remains the single largest use of energy
for these companies.
The non-profit
Cool Roof Rating Council (CRRC),
for instance, suggests roofing surfaces that reflect the sun's heat so as to reduce the urban heat island effect while improving residential energy
efficiency.
«The temperature and pressure requirements
for the air
cooled condensers on power plants are modest,» Pearce says, explaining that allows the team to use polymer heat exchangers to improve
efficiency and cut costs.
However, the lack of materials with suitable thermoelectric
efficiency for practical
cooling applications at temperatures below 250 K (approximately -23 °C) has driven researchers at Nagoya University to look at the effectiveness of new compounds
for truly low - temperature applications.
The State Department official said they wouldn't be eligible
for the $ 80 million in additional funding that rich countries and private financiers pledged last month to help poor countries comply with an «ambitious» phase - down schedule and upgrade the energy
efficiency of their
cooling and refrigeration systems in the process.
Key concepts that were not considered in this study include the economic and health effects of
cool pavements, and potential emissions savings from vehicle - road interactions (
for example, smoother roads may translate to small improvements in fuel
efficiency).
These include technologies
for passively
cooling buildings and urban areas, such as
cool roofs and pavements, as well as the broader set of energy
efficiency measures to reduce the need
for active
cooling.
All the
cool French girls had giant scarfs they piled high but I brought my normal one
for space
efficiency.
Their blog covers all things HVAC, from heating &
cooling, energy
efficiency, and indoor air quality - find tips and tricks
for home comfort and cost - savings.
Energy
Efficiency Schools often have high energy bills with all of the units needed to heat,
cool, and run computers and interactive whiteboards, artificially light classrooms and catering facilities
for the children.
Brilliant Energy Lesson - various different activities Success criteria
for lesson Recall the different ways in which energy can be transferred and stored Describe the law of conservation of energy Describe energy transfer chains
for given situations Includes energy transfer Energy transformation Calculating
efficiency and sankey diagram Lots of
cool relatable scenarios Quiz Odd one out Splat Energy transfer circus - depends on equipment available to you
The turbo's waste gates are also electric rather than pneumatic, and feature machined - from - solid compressor wheels, rather than cast items, to maximise air - flow into the compression chamber and deliver
cooler air
for improved
efficiency and more power.
The cylinder head and block are split
for better
cooling, helping the Hyundai Ioniq achieve a claimed world - best thermal
efficiency of 40 percent.
«The revised shape of the window improves the car's interior aerodynamics by promoting better airflow
for driver comfort while the new front valance has a much closer identity with the original Mustang front - end while increasing the
efficiency of airflow to
cool the engine,» Brock is quoted.
Innovations introduced in the latest version include new low - noise injectors, a water
cooled turbo
for improved performance, reduced piston friction
for optimised
efficiency, new EGR system
for lower particulates, lighter engine components, faster glow plug operation, and enhanced NVH measures.
This guarantees improved operating
efficiency for team engineers and a general lowering of temperatures, thanks to the
cooler and more efficient catalytic converters.
The
cooling jets also allow
for a higher compression ratio
for better engine
efficiency and faster engine oil warm - up on cold starts, also improving fuel economy.
Smooth centre panels allow maximum
efficiency for the
cooling, heating and massage functions, while the bolsters retain the signature Bentley quilting.
The Ceed's optional ECO Pack features an Active Air Flap, which closes and opens depending on engine
cooling requirements, enhancing the car's aerodynamic
efficiency for greater fuel economy.
The new front end is laid out
for optimum aerodynamic
efficiency and maximum airflow to the engine and brake system, while the mighty wheel arches with their openings on the trailing edge aid the
cooling effect on the four - piston brake system.
Production commenced of the large - capacity P313 transaxle
for hybrid vehicles, based on the P310 transaxle but featuring higher torque, stronger motor
cooling performance, higher
efficiency, and a low installation position
Specially designed grooves on the friction material which are integrated into the friction lining
for oil flow and
cooling provide very low losses at the clutch in the open state, enable high transmission
efficiency and smooth shifting capability while increasing fuel economy.
Since the cylinder heads remain
cooler, the knock threshold is pushed back allowing greater optimization of ignition timing
for improved
efficiency.
It modifies the powertrain management and settings
for heating, air conditioning, seats heating and
cooling and electric mirror heating
for maximum
efficiency.
Dubbed the «VR38DETT,» the engine features plasma - sprayed bores (versus cast iron liners)
for reduced friction and weight, enhanced
cooling, superior power output and increased fuel
efficiency.
Plasma - sprayed bores
for reduced friction, lighter weight, enhanced
cooling, power output and fuel
efficiency
The engine features innovative plasma - sprayed bores replacing cast iron liners
for reduced friction, lighter weight, enhanced
cooling, power output and fuel
efficiency; a symmetrical independent intake and exhaust manifold system featuring twin high - performance IHI turbochargers; a secondary air management system
for improved cold - start emissions performance; a thermostatically controlled oil -
cooling system; an oil scavenger pump to maintain oil flowing to the turbochargers; and a lateral wet and dry sump oiling system.
You will claim it's
for air
efficiency or some such guff but the bottom line is you want it to look
cool.
Advanced technologies, including high - speed combustion, multi-hole direct fuel injectors, a continuously variable capacity oil pump, a variable
cooling system and VVT - iE intelligent variable valve - timing on the intake side give the engine maximum thermal
efficiency of around 40 percent — an exceptional number
for a passenger vehicle engine.
Rotocast A356T6 aluminum cylinder heads that are stronger and handle heat better than conventional heads Lightweight titanium intake valves and machined connecting rods
for reduced reciprocating mass High 10.0:1 compression ratio —
for a forced - induction engine — enhances performance and
efficiency and is enabled by direct injection Forged aluminum pistons with unique, stronger structure to ensure strength under high cylinder pressures Stainless steel exhaust headers and an aluminum balancer that are lighter than their LT1 counterparts Standard dry - sump oiling system with larger
cooler capacity than Z51; used with dual - pressure - control oil pump.
They start with slightly larger grilles in the front valance (
for the engine coolant radiators), fitted with louvers that open or close to balance
cooling demands and aero
efficiency.
For such an extremely powerful automobile, the most crucial task of the body shell design is aerodynamic efficiency: the optimum airflow for absolute stability at all speeds and, at the same time, optimum cooling for the engi
For such an extremely powerful automobile, the most crucial task of the body shell design is aerodynamic
efficiency: the optimum airflow
for absolute stability at all speeds and, at the same time, optimum cooling for the engi
for absolute stability at all speeds and, at the same time, optimum
cooling for the engi
for the engine.
The engine utilizes high - speed combustion technology and a variable control system
for greater thermal
efficiency output, which reduces energy losses associated with exhaust and
cooling systems and the movement of mechanical parts, among other factors.
All E-Hybrid Cayennes come with Porsche's Sport Chrono package that includes adjustable driving modes
for maximum
efficiency, max power or something in - between; Porsche Active Suspension Management (with an option
for three - chamber air suspension) and Auxiliary Cabin Conditioning to help heat /
cool the interior while plugged in an outlet.
The front of the chassis has been specially modified to host a high -
efficiency, centrally placed radiator
for engine
cooling.
The 2.0 - liter engine boosts the horsepower to 240 hp, yet still delivers a
cool 30 mpg on the highway
for fuel
efficiency.
However, the Aventador also evokes its immediate predecessor the Murciélago — electronically managed air intakes open depending on the outdoor temperature and the need
for cooling air, ensuring maximum aerodynamic
efficiency.
For example, the GS F's spindle grille was born to further enhance the car's aerodynamics and
cooling, while the air outlets in the front fenders, first applied in the IS F and then the RC F, have been adopted in the GS F because of its
efficiency.
A more aggressive nose and longer front splitter redirect airflow
for better aerodynamic
efficiency, improved engine
cooling and increased
cooling to the radiators.
Plus, the
cooling effect of the direct injections enables an extraordinarily high compression ratio
for a turbocharged engine, which further increases the
efficiency of the V8 engine.
An EGR system, especially one that delivers a cleaner,
cooler charge, reduces pumping loss
for better fuel
efficiency.