(Use a nail gun and construction adhesive to attach it to the ceiling, but don't forget to
cut holes for new light fixtures before you put it up!
I like the feel of the case, and the laser
cut holes for the microphone and speaker feel sharp and well made.
When the fiberglass dries
I cut holes for all the windows and build in windows and waterproof.
The front winch plate has precision laser
cut holes for mounting your roller fairlead.
Cut holes for your axles.
If you use Dixie cups, cover them with aluminum foil and
cut a hole for the Popsicle stick to go through - that will help keep the stick in place.
Finally, for some smaller pets including cats, you can take a tube sock and modify it by
cutting holes for head and legs — just make sure it is long enough to cover the affected area.
You can read about that process, including
cutting a hole for the sink, in THIS POST.
I made my own and plan to stain today... did you run into any issues with
cutting holes for the plumbing or the thickness of the wood?
With attic space above a dark corner, it's easy to add a new light fixture, says Daryl Berg, a journeyman electrician in Longview, Washington: «Just
cut the hole for the fixture and run the wires through the ceiling joists to a new circuit.»
Next, it was time to
cut the hole for the bed frame.
We cut the plywood to fit and still need to stain and trim out the pieces, as well as
cut the hole for the old basin sink we plan to reuse.
If you decide not to do this then simply
cut your hole for your sink with a jigsaw and put your sink in place.
Not exact matches
For instance, While swimming beneath an ice cap in below freezing waters (yes, where
holes in ice caps are
cut out in order to enter and exit), Hof claimed to have lost his sight.
President Donald Trump plans to stick with his campaign pledge to slash the corporate tax rate from 35 percent to 15 percent, but the dramatic
cut raises a problematic question
for the White House: How can the president deliver the «massive» tax
cut he promised without also blowing a massive
hole in the budget?
Certainly, there is something dreamlike about a high - tech company that's so laid - back that many of its 19 employees
cut out
for the fishing
hole or bowling alley at lunch.
Smartphone maker BlackBerry once accounted
for 20 % of Celestica's revenue (which was US$ 6.5 billion last year), but as BlackBerry lost market share in recent years and had to
cut costs, it switched to cheaper Asian suppliers, and the two companies formally announced their split last summer; sure enough, Celestica's first - quarter results showed a BlackBerry - sized
hole in the balance sheet, with revenues down 19 % from the year before.
«Instead Washington chose to
cut taxes
for corporations that send American jobs overseas, blow a
hole in the deficit, and pay
for it by
cutting Medicare and kicking people off their health insurance.»
The best tip I've found to ease the pain of peeling and
cutting a butternut squash, is to poke some
holes with a fork in it and then microwave
for 3 minutes, let it cool then peel and
cut.
You'll want to roll the pastry out,
cut into circles, line a 12 -
hole tray, add the mincemeat, top, then bake at 200 degrees, 180 degree fan
for approx. 15 - 20 minutes until golden.
1) Peel and slice the onions thinly 2) De-seed red bell pepper and
cut into small cubes 3) Saute red bell pepper cubes and sliced onions until onions turn slightly soft and transparent 4) Mix sauteed red bell pepper, onions, and corn together with eggs, milk cream and cream cheese 5) Season with salt, pepper and ground nutmeg to taste 6) Pre-heat oven to 200 deg cel 7) Grease a round baking tray with olive oil 8) Stretch a tart shell and cover the baking tray entirely 9) Pour in the corn - filling mixture over the tart shell, spreading it out evenly 10) Cover the filling with the second stretched tart shell 11) Use a fork to poke
holes in the top tart shell, and then press down on the shell so the juices spill out 12) Sprinkle top of tart with a generous amount of sugar 13) Bake in oven at 200 deg cel
for around 30 — 40 minutes or until tart shell is golden brown 14) Serve with a side of vegetable salad (optional)
Love the little Japaneses pumpkins so this will be perfect
for breakfast, planning to add a pinch of cardamom (something else I love the taste of)-- I also make my own puree but I make it in the microwave by washing, poking
holes in the top and cooking on high till the juices start to leek out the
holes than let sit a few minutes (easier to
cut cooked) The oven works as well - like a giant baked potatoe.
Here's an idea
for an «el cheapo» mini-greenhouse
for young pepper plants:
Cut off the lower third of a large water bottle, poke a small
hole in the bottom, insert soil and your small plant, and water it.
DE Chile Hack # 1 Here's an idea
for an «el cheapo» mini-greenhouse
for young pepper plants:
Cut off the lower third of a large water bottle, poke a small
hole in the bottom, insert soil and your small plant, and water it.
For the version with the fried egg I
cut a
hole in one tortilla the size of the egg yolk.
Cut a few vent
holes and bake
for 25 minutes at 350.
1 Box Chicken Drummettes 1 - 1 1/2 Jars Chunky Salsa 1/2 - 1 Bag Shredded Cheese
Cut a
hole in the bag of Drummettes and microwave
for 1 minute.
I made a thin layer of the dough on baking paper by pressing it and shaping it with my hands (rolling pin just didn't work
for me but I can imagine it would work if I put another sheet of baking paper over the dough to avoid contact of the dough with the rolling pin), then I
cut it with pizza cutter into little squares, made
holes in each square with a fork and baked it * without any turning *
for 30 minutes in the oven preheated to 170 degrees Celsius (350 F).
Chill
for 20 minutes,
cut a steam
hole in the top and bake
for 30 - 40 minutes.
By offering alternatives, such as laser
cut and formed components, Fusion Tech can minimize or eliminate the need
for secondary drilling, milling, or punching of
holes and slots (
for example).
Cut a sheet of pastry into four squares, dock with the tines of a fork (read: make a bunch of
holes), spread a thin layer of crème fraîche in the center, top with kale that's been massaged with olive oil and salt, a slice of ham, and invite everyone you know over
for brunch.
I recommend D - pearls 20 mcg from Pharmanord (
for infants;
cut a little
hole in the pearl and press out the oil in baby's mouth).
Spoon the sauce into a small zip - top plastic bag and
cut off the tip to make a small
hole for drizzling.
For a double - crusted pie, brush with an egg white, sprinkle with sugar, and
cut vent
holes in the top with a sharp knife before baking.
Although his rough first day made it seem as though he was headed toward missing the
cut for the second time in as many tournaments, he had appeared to rebound well through his first 13
holes on Friday.
Tiger arrived at the course bright and early Saturday
for the 7 a.m. restart with an outside shot to make three birdies in his last five
holes and make the
cut.
When Norman saved par on the 8th
hole after hitting his second shot into the trees, his apparent psychic victory was turned into a defeat because Faldo topped him with a 20 - footer from the fringe
for a birdie that
cut the lead to three.
He would hit the
hole, dart,
cut, twist and slash
for four, then eight, then five, then eight, then 10 or 12.
That's
for the coaching staff to determine, but given the
holes in Landry's game I don't see him as a clear
cut choice over the competition.
With rounds of 75 and 77, he missed the 36 -
hole cut for the first time since March of last year.
The last groups on the course still have six
holes to play, so there's about 90 minutes worth of coverage on Saturday morning before the
cut is made, the players are re-paired and everything is reloaded
for the third round in the afternoon.
All DJ did on the 420 - yard 71st
hole, when he was tied
for the lead, was
cut a ridiculously long tee shot over the trees and the dogleg, leave himself a 94 - yard wedge shot and stuff it close
for what turned out to be the winning birdie.
Only six players broke par
for the tournament, while 21 finished at 12 - over-par 300 or above — and those were players fortunate enough to have made the 36 -
hole cut.
Next up, the Falcons are again running outside zone, but the tight end is sliding back to
cut off the defensive end, allowing
for a larger
hole for the back.
As some of the players out early ahead of Rory on the course demonstrated, there are plenty of birdie chances out there
for the young Northern Irishman to
cut into that six - shot
hole he started in.
Lets use the money to address the massive
holes in defence and midfield and
for the rest of the season give playing tine to Wellbeck, Iwobi and young Neilson to see if they can really
cut it.
A lot of the
holes, you hit nice soft
cuts and I used to love to hit nice soft
cuts, and
for some reason I just didn't play well.»
It took a score of six under par to make the 36 -
hole cut at the Disney, a record low
for a Tour event....
To be special — must be able to get tough yards — must have vision
for the
hole — and then the jump
cut and acceleration to take it to the house.
They keep the top 70 and ties and have no secondary 54 -
hole cut, so they're stuck with that bloated 86 player number
for the next two rounds.