Sentences with phrase «cylinder bore diameter»

The dimensions of the engine components such as crankshaft throw, cylinder bore diameter and stroke will decide the BMEP.

Not exact matches

The crankcase features different machining, the main bearings are a new design, the forged pistons are stronger and feature a new dome geometry, the exhaust manifolds boast diameters increased by 30 percent per cylinder, and the compression ratio decreases from 9.5:1 in the Turbo S to 9.0:1.

The bias is determined more by the diameter of the master cylinder bore and the size of the caliper piston sizes, front and rear, front being larger, rear smaller.

I imagine that there is a limit to how much you can increase the diameter (bore) of the cylinders.

Cylinders are cast into an engine block formed of cast iron or aluminum and then bored and drilled to the final bore diameter

Modularity in parts — such as four - cylinder and three - cylinder blocks — that share bore spacing, bore diameter, liners and other dimensions, reduces complexity while increasing the flexibility to quickly adapt the architecture for new applications.

Technical Data: 12 - cylinder - engine with 60 degree V - configuration, four valves per cylinder, bore x stroke 84.6 mm x 92 mm (3.33 in x 3.63 in), capacity 6,749 cc (411.8 cu in); digital engine control, SAE 453bhp at 5350rpm (DIN 460hp / 338KW at 5,350 rpm), max torque 531 lb ft (720Nm) at 3,500 rpm; ZF6HP32 6 - speed automatic gearbox; independent suspension front and rear, ventilated disc brakes (diameter front 374 mm, rear 370 mm), anti locking device; wheelbase 130,7 in (3,320 mm); height 62.2 in (1,581 mm), width 78.2 in (1,987 mm), overall length 220.8 in (5,609 mm); Michelin tyres PAX265x790 R540 A 11W on light alloy wheels PAX265x540A ALU (optional tyre size: front Goodyear EMT 255 / 50R21 106W on alloy wheels 8x21 and rear Goodyear EMT 285 / 45R21 109W on alloy wheels 9.5 x21 rims at the rear; max.

Technical Data: W12 - cylinder - engine (72deg angle between two main banks, 15deg between staggered cylinders), bore x stroke 84 x 90.2 mm, capacity 5998 cc; 4 valves per cylinder, 4 overhead camshafts; Bosch Motronic digital engine control, twin Borg - Warner turbochargers, air to air intercooling, 552bhp / 411KW at 6,100 rpm, torque 650Nm (479 lb ft) at 1600 rpm; ZF 6HP26 6 - speed automatic gearbox; four - wheel drive with central Torsen differential, independent suspension front and rear; air springs, ASR electronic traction control, Bosch ESP 5.7 electronic stability program; TEVES ventilated disc brakes front 15.9 in diameter (405 mm) and 1.4 in (36 mm) thick, back 13.2 in diameter (335 mm) and 0.9 in (22 mm) thick, anti-lock device (plus HBA > Hydraulic Brake Assist < and EBD > Electronic Brakeforce Distribution <), MSR drag torque control; wheelbase 108.07 in (2745 mm); Overall weight 5,500 lb (2,495 kg); tyres 275 / 40R19 on 19in rims (optional 19in split rims or 275 / 35R20 on 20in split rim 7 - spoke sports alloy wheels); max.

Technical Data: 12 - cylinder - engine with 60 degree V - configuration, four valves per cylinder, bore x stroke 84.6 mm x 92 mm (3.33 in x 3.62 in), capacity 6,749 cc (411.8 cu in); digital engine control, SAE 453bhp (SAE) at 5350rpm (DIN 460hp / 338KW at 5,350 rpm), max torque 531 lb ft (720Nm) at 3,500 rpm; ZF6HP32 6 - speed automatic gearbox; independent suspension front and rear, ventilated disc brakes (diameter front 14.7 in / 374 mm, rear 14.6 in / 370 mm), anti locking device; wheelbase 130.7 in (3,320 mm), track front 66.4 in (1,687 mm), track rear 65.8 in (1,687 mm); height 62.7 in (1,592 mm), width 78.2 in (1,987 mm), overall length 220.8 in (5,609 mm), curb weight 5,776 lb (2,620 kg), gross weight 6,724 lb (3,050 kg); tyres front Goodyear EMT 255/50 R21 106W on light alloy wheels 8in x 21in, tyres rear Goodyear EMT 285/45 R21 109W on light alloy wheels 9.5 in x 21in); max.

Technical Data: Twin turbo V12 - cylinder - engine, four valves per cylinder, bore x stroke 3.48 in x 3.5 in (88.3 mm x 89 mm), capacity 6,592 cc (402.3 cu in); digital engine control, 563bhp (SAE) at 5250rpm (DIN 570hp / 420KW at 5,250 rpm), max torque 575 lb ft (780Nm) at 1,500 rpm; ZF 8HP90 8 - speed automatic gearbox; independent suspension front and rear with Electronic Stability Program (ESP) including Antilock Braking System (ABS) and Electronic Brake Pressure Distribution (EBD), traction control Automatic Slip Regulation (ASR), aquaplaning detection; ventilated disc brakes (diameter front 16.1 in / 410 mm, rear 15.8 / 402 mm); wheelbase 129.7 in (3,295 mm), track front 63.9 in (1,622 mm), track rear 65.4 in (1,660 mm); height 61in (1,550 mm), width 76.7 in (1,948 mm), overall length 212.6 in (5,399 mm), DIN curb weight 5,203 lb (2,360 kg), EU curb weight 5,368 lb (2,435 kg), gross weight 6,482 lb (2,940 kg), payload 1,279 lb (580 kg); tyres front Goodyear EMT255 / 50R19 103Y on light alloy wheels 8,5 x19in, tyres rear Goodyear EMT255 / 50R19 103Y on light alloy wheels 8,5 x19in (optional tyres front Goodyear EMT255 / 45 R20 101Y Summer on light alloy wheels 8,5 Jx20 EH2 + IS25, tyres rear Goodyear EMT285 / 40 R20 104Y Summer on light alloy wheels 9,5 Jx20 EH2 + IS33), tyre pressure monitoring system; max.

Technical Data Bentley Continental GT Speed: W12 - cylinder - engine (72deg angle between two main banks, 15deg between staggered cylinders), bore x stroke 84 x 90.2 mm, capacity 5998 cc; 4 valves per cylinder, 4 overhead camshafts; Bosch Motronic ME7.1.1 digital engine control, twin turbochargers air to air intercooling, 600bhp / 449kW) at 6000rpm, torque 750Nm (553 lb ft) at 1750 rev / min; ZF 6 - speed automatic gearbox; four - wheel drive with central Torsen differential, independent suspension front and rear; air springs, ASR electronic traction control, uprated Bosch 8.1 ESP electronic stability program; TEVES ventilated disc brakes front 405 mm diameter (15.9 in) and 36 mm (1.4 in) thick, back 335 mm diameter (13.2 in) and 22 mm (0.9 in) thick, anti-lock device, fade - resistant carbon - ceramic brakes 420 x 40 mm carbon - silicon carbide, cross-drilled front discs and 356 x 28 mm rears optional; HBA «Hydraulic Brake Assist» and EBD «Electronic Brakeforce Distribution», MSR drag torque control; wheelbase 2745 mm (108.07 in); 9.5 Jx20 wheels with 275 / 35x20 bespoke Pirelli P - Zero performance tyres; max.

Displacement is 6,498 cm3 and cylinder spacing 103.5 millimeters, while bore diameter measures 95 millimeters and stroke 76.4 millimeters.

Cylinder heads and cam covers Crankshaft: crank pin diameter, connecting rod big - end bearing size and crank counter-weight size are all reduced, to reduce reciprocating weight Crank main bearings and caps High - strength forged connecting rods Pistons and piston rings Titanium inlet and exhaust valves Intake manifold and throttle body Redesigned Variable Valve Timing - intelligent Electric motor (VVT - iE) Revised Lexus D - 4S dual injection system Four - into - one exhaust headers and heat insulators Oil pan and baffle plate Alternator clutch system Engine and transmission oil coolers Spark plugs

For more displacement, SRT engineers bored out the diameter of the cylinders in the HEMI ® by 3.5 millimeters each in order to increase the total displacement to 6.1 litres from 5.7 litres.

Technical Data Bentley Continental Supersports: Light Alloy W12 - cylinder - engine (72deg angle between two main banks, 15deg between staggered cylinders), bore x stroke 84 x 90.2 mm, capacity 5998 cc; 4 valves per cylinder, chain - driven DOHC per bank, cam phased inlet and outlet; Bosch digital engine control, twin turbochargers, 600PS / 621 bhp / 449kW) at 6000rpm, torque 800Nm (590 lb ft) at 1700 to 5600rev / min; Fuel E85 & 98 (95) RON; ZF 6 - speed «Quickshift» automatic gearbox; continuous four - wheel drive with 40/60 rear bias torque split, central Torsen differential; suspension front: four - link double wishbones, computer - controlled self - levelling air suspension, anti-roll bar; suspension rear:: trapezoidal multi-link, computer - controlled self - levelling air suspension, anti-roll bar; dampers: continuous damping control with four adjustable settings, electronic traction control, electronic stability program; carbon / ceramic brakes, cross-drilled, front discs 420 mm diameter, rear 356 mm diameter; HBA «Hydraulic Brake Assist» and EBD «Electronic Brakeforce Distribution», MSR drag torque control; kerb weight 4,939 lbs (2240 kg), wheelbase 108.07 in (2745 mm), track front 63.9 in (1,623 mm), track rear 65.2 in (1,657 mm); wheels 20» x 9.5 J 10 - spoke (black chrome or painted) with tyres 275 / 35x20 Pirelli P - Zero UHP; electronic tyre pressure monitoring system; max.

Technical Data Bentley Continental GT Speed: W12 - cylinder - engine (72deg angle between two main banks, 15deg between staggered cylinders), bore x stroke 84 x 90.2 mm, capacity 5998 cc; 4 valves per cylinder, chain - driven double overhead camshaft per bank; Bosch Motronic ME7.1.1 digital engine control, twin turbochargers, air to air intercooling; 600bhp / 610PS / 449KW at 6.000 rev / min; torque 750 Nm / 553 lb ft between 1750 — 5600 rev / min; permanent all - wheel drive; 6 - speed automatic gearbox with fully automatic or sequential «manual» operation with paddleshift feature, torque converter lock - up clutch; front suspension gour - link double wishbones, rear suspension trapezoidal multi-link, front and rear electronically controlled self - levelling air suspension, anti-roll bars; dampers with 4 adjustable settings; ASR electronic traction control, Bosch ESP 8.1 electronic stability program, TEVES ventilated disc brakes front 15.9 in diameter (405 mm) and 1.4 in (36 mm) thick, back 13.2 in diameter (335 mm) and 0.9 in (22 mm) thick (optional — with 20in wheels - carbon / ceramic cross-drilled discs 420 mm diameter front, 356 mm rear) anti-lock Standard ESP and EBD (Electronic Brakeforce Distribution); kerbweight 5478 lb (2485 kg), wheelbase 108.07 in (2745 mm), track front 63.9 in (1623 mm), track rear 63.3 in (1607 mm); tyres Pirelli P Zero UHP 275 / 35ZR20 (optional 275 / 30ZR20 Pirelli PZero UHP) on 9.5 Jx20 alloy wheels; electronic tyre pressure monitoring; max.

Plasma coated cylinder liners, a central oil supply through the crankshaft with larger bearing diameters, larger connecting rod bearings and the rigid valve train with shims to provide valve clearance compensation all carry over from the 2018 911 GT3.

Cast iron cylinder liners — measuring 4.06 inches (103.25 mm) in bore diameter — are inserted in the aluminum block and they are finish - bored and honed with a deck plate installed.

Stainless Steel Brakes offers its forged aluminum master cylinders in 144 different varieties of tops, finish, and bore diameters (1» and 1 1/8»).

The displacement increase is the product of a special crankshaft with longer stroke, precision - balanced piston rods, larger - diameter pistons and corresponding larger cylinder bore.