Sentences with phrase «cylinder engine runs»

As for performance, the fuel - injected, four - cylinder engine runs with the smoothness of a Swiss watch.

The 2.5 - litre four cylinder engine runs on the Atkinson cycle, which trades off some power for increased efficiency.

2008 Ford Escape 140k for miles 2 wheel drive 4 cylinder engine runs and drives great good on gas automatic nice reliable suv asking $ 3500 obo call or txt...

For all practical purposes, the E300's 3.0 - liter, straight six - cylinder engine runs about as smoothly and quietly as a large displacement four - cylinder.

This all - new four - cylinder engine runs smooth thanks to internal balance shafts to counteract vibration, combines power with good fuel efficiency thanks to variable valve timing / lift and direct fuel injection, and operates with an easy, free - revving liveliness thanks to careful detailing to reduce friction and because, well, that's just the Honda way.

The convertible features the same powertrain as the earlier concept — a 1.4 - liter turbocharged four - cylinder engine running on E85 ethanol is mated to a version of GM's next - generation hybrid system.

The CVT made for smooth, gearless acceleration whenever I wanted to pass slower traffic, and it kept the 2.5 - liter four cylinder engine running at optimal speed, around 1,800 rpm, while cruising at anywhere from 40 to 70 mph.

If the tune is identical to the Accord Hybrid, then the crossover would use a 2.0 - liter four - cylinder engine running on the Atkinson cycle with 143 horsepower (107 kilowatts) and 129 pound - feet (175 Newton - meters) of torque.

Not exact matches

Equipped with a genuine, 110CC, air - cooled, 4 - stroke, 1 - cylinder, kickstart engine, this bike runs on one gallon of gas and reaches speeds of up to 25 mph.

Some manufacturers have increased engine capacity by boring out the cylinders this in some cases has left very little metal between the water jacket and the cylinder head if you don't run glycol with an alloy motor this can corrode allowing water into the cylinder hence the steam on start up of the engine.

Two examples of this which are slightly different being the original Lampredi Fiat / Lancia Twin Cam (8v) engine which ran twin cams but only single inlet and exhaust valves per cylinder and the other being the Mk2 / Mk3 Golf GTI 16v engine, a DOHC design which featured two inlet and two exhaust valves per cylinder.

Standard Equipment: 1.4 - liter turbocharged four - cylinder engine 6 - speed automatic transmission Stabilitrak stability control Traction control 4 - wheel disc brakes with ABS Daytime running lamps Remote keyless entry Rear parking assist Tire pressure monitoring system 6 - month On - Star coverage Heated outside mirrors 18 - inch alloy wheels AM / FM stereo with CD player XM satellite radio Floor mats USB audio interface Power adjustable driver's seat Air conditioning with automatic climate control Auxiliary audio input Auto - dimming rearview mirror Tilt / telescoping steering column Power locks / windows / mirrors Cruise control Bluetooth connectivity

If you can't see any obvious signs of leaks, or steam coming from anywhere if you run the engine, a likely cause is a cracked cylinder head gasket, which is letting the coolant into the cylinders and out of the tail pipe as steam.

One thing worth mentioning is that running with a missing cylinder will result in engine vibrations that will be felt across most of the rev range.

You'll also encounter designs where the engine runs multiple banks of cylinders such as V or boxer engines.

Oil bypasses them as the engine sits and runs down the valve stem to sit on top of the valve, to then be sucked into the cylinder upon startup.

The 2.8 - liter turbodiesel truck engine sports an iron cylinder block with an aluminum dual - overhead cam head, forged steel crankshaft and connecting rods, a common rail direct injection fuel system, and a balance shaft to run the oil pump and increase smoothness.

How do the lengths of the bore and stroke affect the performance (power and torque), and general running characteristics (e.g. redline, noise etc) of a 4 cylinder engine?

When these engines run an OHC design, the typically have a camshaft per bank of cylinders.

The entire lubrication system for the engine fails, leading to scratching of the cylinders and the barrels, after which point they do nt run smoothly and degrade much faster.

What I'm talking about here is the ability to pull out a spark plug and tell how the engine at a specific cylinder is running.

The cam has a «bump» or «hump» in it which actuates the valves which allows air into and exhaust out of the cylinder of the engine at the correct time so the engine will run correctly.

We never needed to breach 3,000 rpm, which helps the engine run efficiently and keeps cylinder temperatures low enough to avoid the need for wasteful fuel enrichment.

When engaged, the three - cylinder gasoline engine runs all the time, rather than automatically shutting off when the vehicle comes to a stop.

The engine is the biggest news, with 414bhp and 406 lb ft on tap and able to run as a V4 under light loads by keeping the other four cylinders» inlet valves shut.

During light - throttle cruising at moderate speeds, the V - 8 engine is capable of running on just four of its cylinders.

In most cars, yes the engine continues to rotate and the pistons go up and down in the cylinder bore due to combustion and the engine continuing to run.

Hypercars must have some form of hybridisation, hot hatches are powered by four - cylinder turbo engines, supersaloons run twin - turbo V8s.

Engine was underpowered because it only running on 3 cylinders.

Top speed is the same, and when the little two - cylinder range - extending engine is running there's a little more noise, but it's still quieter than most conventional cars.

A run down the 2016 Ford Focus RS's spec sheet reveals a car that our enthusiast judges should love: a punchy, turbocharged four - cylinder engine that makes 350 horsepower and 350 lb - ft of torque; performance - tuned all - wheel - drive handling; a six - speed, honest - to - goodness manual gearbox; and a button that puts the car's stability control into Drift mode.

The latter isn't an all - new function, but Chevrolet has added a few tricks — notably some NVH concessions in the exhaust system — that allow the engines to run on four cylinders for longer periods of time.

My dream is a Lanz Eilbulldog, built in the 1940s, it sounds like thunder, with its one - cylinder 10liter engine with 55hp and a weight of 5 tonns it is running 30kmH:-D.

Many two stroke single cylinder race engines suffer from this and will run just fine for ages with slap, but these are normally serviced & rebuilt regularly enough that failure is rare.

If as you say engine temps stayed normal then I would guess that this maybe excess coolant or oil that has run along the rocker cover or has ended up trapped in the recesses on the outside of the cylinder head, and this is burning off when it comes into contact with the hotter exhaust port area.

Even then, the engine often runs in four - cylinder mode, further aiding fuel economy.

If you think two of your cylinders aren't firing, run the engine and pull the spark plug wires off one at a time, listen to see if the sound of the engine changes at all.

The Roadster is offered with a choice of two six - cylinder engines, running gear donated by either the BMW 330i or the M3; my guide, marketing director Olaf Sewald, admits that only one buyer opted for the lower - powered car last year.

The 2016 Volvo S60 and V60 Polestar won't receive any significant changes over the first production run of high - performance sedans and wagons that featured a turbocharged six - cylinder engine making 345 hp and 369 lb - ft of torque.

In addition to a lightweight chassis and a stripped - out interior, it's said that the Golf GTI Clubsport Lightweight will run a retuned 2.0 - liter turbocharged four - cylinder engine coupled to either Volkswagen's brilliant dual - clutch transmission, or a standard six - speed manual.

That's a lot of surface to cover the four - cylinder GM engine that keeps electricity flowing after the batteries run dry, but it's hard to fault the overall effect.

While the single cylinder will be able to run, it will not spin up (rev) as fast as the six cylinder, nor will it be able to spin as high (rpm range) due to the mass of the single piston driving engine, as well as the mass having to be used to counteract the piston.

We left without a clue whether there will be the same four and six - cylinder engines or a breakthrough is in the offing and the Ford Edge will soon be running on a mighty, mighty twin fueled by your choice of balsamic vinegar or seawater.

Although this smaller - displacement turbo four - cylinder has lower internal friction and reduced pumping loss than a Skyactiv V - 6 would, fuel efficiency drops when the engine is under high load, as the engine runs richer to help keep the cylinders cooler.

Runs and drives well, powered by a 430ci 8 - cylinder engine and automatic transmission.

Amazing survivor, 1961 Austin Healey Bug Eye Sprite, original rust - free, low mileage, stock 4 - cylinder engine, dual SU carburetors, 4 - speed manual transmission, original side curtains, new top, weighs 1,455 pounds, runs and drives great.

The combustible carb cleaner will be sucked into the leak, and the engine will pick up its idle speed momentarily — and probably run on all cylinders if it's been misfiring.

The M TwinPower Turbo inline 6 - cylinder petrol engine features superior power delivery, silky smooth running and an exceptional performance.

The horizontally opposed arrangement of the engine's cylinders also helps to reduce oscillations, which has a positive impact on smooth running.

I've known Turner for years and first met him when he was at Lotus (he had two stints at the Norfolk company), where he worked on the Corvette ZR1 engine, Lotus's own V8 and numerous skunkworks projects, including a test engine nicknamed Omnivore for its ability to run on virtually any fuel, and an optical engine that allowed the combustion process to be observed through a transparent cylinder.