Sentences with phrase «cylinder mill»

The naturally aspirated 1.1 - liter three - cylinder mill comes in two flavors — a 69 - horsepower entry - level model and an 83 - horsepower version.

The entry - level models, on the other hand, are motivated by a 2.7 - liter, four - cylinder mill rated at 185 horsepower and 184 pound - feet of torque.

The base 1.8 L turbocharged and direct - injection four - cylinder mill makes 170 horsepower and 184 lb. - ft.

This four - cylinder mill produces 141bhp / 340Nm and is mated to a seven - speed DSG and 4MOTION all - wheel drive system with primary orientation being towards to the front wheels.

The Focus Titanium's engine is the same 2.0 - liter, four - cylinder mill found with the base model, which means 160 horsepower and 146 lb - ft of torque, and buyers can choose between either a five - speed manual or a six - speed dual - clutch automated manual gearbox.

I don't fault the four cylinder mill for noise, but the cabin, which didn't seem to have any more sound deadening materials than a standard Honda Civic.

Under the bonnet resides the same MR20DD 2.0 litre direct - injected twin - CVTC four - cylinder mill as before, mated to an Xtronic CVT equipped with Adaptive Shift Control (ASC), which detects corners or hills through the vehicle's lateral acceleration sensor, matching the ratios to suit different driving conditions.

The model sourced isn't powered by the multiple award winning 1.0 - litre EcoBoost engine so the AP government isn't doing its bit to save the environment as the 3 - cylinder mill offers lower CO2 emissions.

Diesel variants carry over the same 1.5 L TDCi 4 - cylinder mill good for 100 PS and 205 Nm.

However, one of the biggest surprises is the availability of Hyundai's first - ever diesel engine in the States, a turbocharged, 2.2 - liter 4 - cylinder mill with an output of 190 hp and 322 lb. - ft.

While the M550i is supremely quick in a straight line and the gargling eight - cylinder mill sounds right at home flying down Big Willow's main straight, both the brakes and the suspension seem to be a step or two behind that boosted mill.

The 428i model features BMW's own popular TwinPower Turbo 2.0 - liter 4 - cylinder engine, while the 435i model gets another one of the company» s renowned TwinPower Turbo 3.0 - liter inline six cylinder mill fitted under its hood.

The 1.5 - litre turbo is a DOHC direct - injected four - cylinder mill tuned to produce 174 horsepower and 162 lb - ft of torque in LX trim; and 180 horsepower and 162 lb - ft of torque in the Sport and Sport Touring trim.

There's really not much to choose from because the Mini JCW only comes with one engine variant: the 2.0 - liter four - cylinder mill whose behavior we described above.

The Sonic's base 1.8 - liter four - cylinder motor is good for 138 horsepower, but upgrading to the available 1.4 - liter turbocharged four - cylinder mill introduces 148 lb - ft of torque (while maintaining the same number of horses at the crank) along with improved fuel mileage figures of 29 - mpg city and 40 - mpg highway.

The entry - level Patriot's 2.0 - liter, four - cylinder mill generates 158 horsepower, while its available 2.4 - liter four - cylinder is good for 172 horses (and is required for Freedom - Drive II).

The Cooper is powered by the 1.5 - litre 3 - cylinder mill pumping out 137PS of power and 220Nm of torque while the 2.0 - litre 4 - cylinder engine in the Cooper S dishes out 194PS of power and 280Nm of torque.

A six - speed automatic joins the party as the Toyota's sole gearbox option, and the vehicle's 2.5 - liter, four - cylinder mill also turns in 31 - mpg during highway driving.

This hand - built 2.0 - liter four - cylinder mill uses turbocharging and direct injection to help produce an incredible 355 horsepower and 332 pound - feet of torque, which Mercedes continues to tout as the most powerful production four - cylinder turbo engine in the world.

As for powertrain options, the 1.5 litre, turbocharged three - cylinder engine found in current F56 MINI Cooper will most likely feature alongside the B48 2.0 litre, turbocharged four - cylinder mill from the Cooper S.

There is also a Turbo model with a 1.6 - liter turbocharged four - cylinder mill churning 201 hp and 195 lb - ft of torque, which is more respectable, but still isn't fast enough to match its sporty style.

The diesel range starts from the CLS 300d with a 2.0 - litre, turbocharged, four - cylinder mill which produces 231 PS and 450 Nm, while the CLS 350d gets a 2.9 - litre, six - cylinder engine producing just under 290 PS and 600 Nm.

The Ecotec ignites and the cabin gets a pretty decent new atmosphere with bass and baritone notes, though the notes should still be lower so as to hide the fact that it's a four - cylinder mill at our feet.

Although the turbocharged 2.0 - liter 4 - cylinder found in the base model is stout enough, the extra weight of the convertible mechanism almost demands that buyers go for the turbocharged 3.0 - liter 6 - cylinder mill found in the 435i, which brings with it 300 horses.

As for the engine under the hood, the new 2018 Ford Mustang is rumored to keep the 2.3 - liter turbocharged EcoBoost flat - four cylinder mill as standard and loose the 3.7 - liter V6 mill.

As a reminder, the eight - cylinder mill produces 575 metric horsepower and 700 Nm (516 lb - ft) of torque, allowing the performance SUV to go from 0 to 100 km / h in 4.5 seconds (0 - 60 mph in 4.3 seconds) and reach a top speed of 280km / h (174mph).

The four - cylinder mill offered two power outputs: 132 hp / 128 lb - ft for the L, LE and S versions, and 140 hp / 126 lb - ft for the allegedly more efficient LE Eco derivative.

A 2.4 - liter, four - cylinder engine offers 176 horsepower, while paying a bit more for the sporty SX trim introduces a turbocharged 2.0 - liter four - cylinder mill good for 260 horses.

You can choose between either a 2.0 - liter turbocharged four - cylinder version of the X3 (240 horsepower and 260 lb - ft of torque) or a 300 horsepower 3.0 - liter turbocharged six - cylinder mill for 2013 editions of the vehicle, while 2012 X3s feature a 240 horsepower, 3.0 - liter naturally - aspirated six - cylinder in place of the turbo four.

We only spent time with the Denali and All - Terrain models, both equipped with the 3.6 - liter engine, so we'll have to wait on a verdict for the four - cylinder mill.

The engines are said to produce more power than today's six - cylinder mills, yet consume less fuel than today's four - cylinders.

That's 20 hp and 15 lb - ft more than the outgoing 4.8 - liter V - 8 engine, and the new six - cylinder mill should also be more fuel efficient.

It combines clean lines, a poised chassis, astounding interior room for its trim exterior dimensions, a gutsy turbocharged four - cylinder mill, and a very reasonable sticker (about $ 25,000 for the base Wolfsburg Edition).

While the current Chevrolet Volt uses a 1.4 - liter four - cylinder as a range - extender and generator for the Volt's battery and electric motor, the next Volt could switch to a smaller and lighter turbocharged 1.0 - liter three - cylinder mill.

Although Winklemann has hinted at turbocharged eight - cylinder mills, the Lamborghini Urus is more likely to launch with either the 5.2 - liter V - 10 from the Huracan or the 6.5 - liter V - 12 engine in the Aventador.

The new Skyactiv - G 2.5 T is a 2.5 - liter turbocharged four - cylinder mill that is tuned specifically for low - end torque, which peaks with 310 lb - ft at just 2,000 rpm.

The car comes with two petrol engines - 120 PS 1.0 - litre T - GDI turbocharged three - cylinder and 140 PS 1.4 - litre T - GDI turbocharged four - cylinder mill.

Probably the best thing you can say about the Mirage's three - cylinder mill is that it's never out of earshot; it's rougher and louder than any new car engine you can name.

Stick with the 2.7 - liter, 185 - horsepower four - cylinder mill that it comes with out of the box and you'll end up with a paltry 1,500 lbs of trailer towing ability.

If you want to go all - out, you can even spec a 550 - horsepower version of the eight - cylinder mill (XJR) for the ultimate in highway dominance.

The four - cylinder mill is a refined creature, Kia saying it has improved «smoothness and efficiency» over the previous unit, while also bettering low and mid-range torque.

The only engine currently available for the CX - 5 is this naturally aspirated 2.5 - liter four cylinder mill, good for 187 horsepower.

In the engine department, the 2017 Audi Q5 is expected to carry over the same engine lineup from the all - new Audi A4, including the top of the line turbocharged petrol and turbo - diesel four - cylinder mills, along with the new twin - turbo V6.

Power from the 4 - cylinder mill is transmitted to all four wheels via a 9 - speed automatic transmission.

This naturally aspirated four - cylinder mill produces 104.7 PS at 6,000 rpm and 138 Nm of torque at 4,400 rpm.

This is a three cylinder mill, which carries 12 valves.

The direct - injected 2.0 - litre, four - cylinder mill was first used in the NX 200t crossover, the first Lexus to feature a turbocharged engine.

The petrol engine is also a turbocharged four - cylinder mill that develops 180bhp of power at 5700rpm and 240Nm of torque from 1600rpm and is offered only with the V40 Cross Country.

Under the hood, things will remain the same, as it will feature the 2.0 - liter, four - cylinder mill that cranks out 167 horsepower and 140 pound - feet of torque when mated to the standard six - cog manual.