Sentences with phrase «cylinder mill at»

The Ecotec ignites and the cabin gets a pretty decent new atmosphere with bass and baritone notes, though the notes should still be lower so as to hide the fact that it's a four - cylinder mill at our feet.

Not exact matches

In the power and energy sector, 35 communities, he said, had been connected to the national grid, with streetlights installed at Bugri and Basyonde, 1,500 LPG cylinders and 200 solar lamps distributed among households as well as 17 corn - mill machines shared among all the electoral areas in the constituency.

The new 1.5 - liter engine, which will replace the 1.4 - liter four - cylinder at work in the current Volt, is the largest mill within General Motors» new Ecotec gasoline engine family.

The new Skyactiv - G 2.5 T is a 2.5 - liter turbocharged four - cylinder mill that is tuned specifically for low - end torque, which peaks with 310 lb - ft at just 2,000 rpm.

A re-engineered 1.8 - liter four - cylinder engine rated at 140 hp is the standard mill.

While the M550i is supremely quick in a straight line and the gargling eight - cylinder mill sounds right at home flying down Big Willow's main straight, both the brakes and the suspension seem to be a step or two behind that boosted mill.

Volkswagen states that the next generation Passat will get two new engines which include a 2.0 - litre 4 - cylinder bi-turbo diesel mill that produces 240 PS of power and 500 Nm of torque at 1750 RPM and will come with a very exclusive new 7 - speed DSG automatic transmission and 4Motion four - wheel drive technology.

The Chevrolet adds the wrinkle of a 2.5 - liter, four - cylinder engine at the entry level, and this mill is good for 195 horses and 187 lb - ft of twist.

This naturally aspirated four - cylinder mill produces 104.7 PS at 6,000 rpm and 138 Nm of torque at 4,400 rpm.

The entry - level models, on the other hand, are motivated by a 2.7 - liter, four - cylinder mill rated at 185 horsepower and 184 pound - feet of torque.

The three - cylinder naturally aspirated petrol mill produces 123hp at 6,500 rpm and 150Nm at 4,500 rpm, and can be mated to either a five - speed manual gearbox or a six - speed automatic.

This new mill also features Audi's cylinder - on - demand technology that can temporarily shut down cylinders when the engine is working at partial load.

Talking about power, the new Mahindra NuvoSport uses a 1.5 - litre three - cylinder mHawk diesel mill tuned to produce 100bhp of power at 3750rpm and a peak torque of 240Nm between 1600 - 2800rpm.

The Sonic's base 1.8 - liter four - cylinder motor is good for 138 horsepower, but upgrading to the available 1.4 - liter turbocharged four - cylinder mill introduces 148 lb - ft of torque (while maintaining the same number of horses at the crank) along with improved fuel mileage figures of 29 - mpg city and 40 - mpg highway.

The most important engine though has been the all - new 2.0 - litre 4 - cylinder bi-turbo diesel mill that produces 240 PS of power and 500 Nm of torque at 1750 RPM and will come with a very exclusive new 7 - speed DSG automatic transmission and 4Motion four - wheel drive technology.

The turbocharged four - cylinder diesel mill produces 160 PS at 4,000 rpm and 350 Nm of torque at 2,000 rpm.

The T5 Turbo sits at the bottom of the range with 254 ponies and 258 pound - feet of torque, while the T6 Turbo, essentially the same supercharged and turbocharged four - cylinder mill found in the hybrid model, cranks out 316 horsepower and 295 pound - feet of twist.

The 116i is powered by an all - new direct - injected 1.6 - litre four - cylinder turbocharged mill which at 100kW / 220Nm delivers the same output as the previous 118i.

Although the horsepower number seems anemic at just 220, I will say that the car feels much more powerful and it certainly doesn't feel like your run - of - the - mill 2.0 liter inline 4 - cylinder.

The naturally aspirated three - cylinder mill produces 50 kW (68 PS) at 5,000 rpm and 104 Nm of torque at 4,000 rpm.

Power comes from a turbocharged, 0.9 - liter, three - cylinder gasoline engine rated at 85 horsepower and 145 Nm (107 pound - feet) of torque or a 1.3 - liter, four - cylinder, diesel mill generating 75 horses and 190 Nm (140 pound - feet) of twist.

The Raptor sheds both its SVT branding as well as its eight - cylinder engine, swapping in a 3.5 - liter EcoBoost V - 6 that has been tuned to produce more than the outgoing mill — so for those of you keeping score at home that means more than 411 horses and 434 lb - t of torque.