Sentences with phrase «cylinder mill with»

However, one of the biggest surprises is the availability of Hyundai's first - ever diesel engine in the States, a turbocharged, 2.2 - liter 4 - cylinder mill with an output of 190 hp and 322 lb. - ft.

Not exact matches

In the power and energy sector, 35 communities, he said, had been connected to the national grid, with streetlights installed at Bugri and Basyonde, 1,500 LPG cylinders and 200 solar lamps distributed among households as well as 17 corn - mill machines shared among all the electoral areas in the constituency.
The engine has the same measurements as the previous Versa's 1.6 - liter, but Nissan says it's new, and the mill utilizes variable valve timing on both intake and exhaust cycles and squirts fuel via two injectors per cylinder (not to be confused with direct injection, mind you).
Under the hood of the 2019 Infiniti QX50 will be the first application of the automaker's 2.0 - liter VC - T four - cylinder engine, a turbocharged gas mill with variable a compression ratio.
The new Skyactiv - G 2.5 T is a 2.5 - liter turbocharged four - cylinder mill that is tuned specifically for low - end torque, which peaks with 310 lb - ft at just 2,000 rpm.
The car comes with two petrol engines - 120 PS 1.0 - litre T - GDI turbocharged three - cylinder and 140 PS 1.4 - litre T - GDI turbocharged four - cylinder mill.
The pinnacle of AMG's new C - Class derived line - up, the new AMG top - model will be powered by the M178 4.0 - litre bi-turbo V8, derived straight from the AMG GT supercar's M177 mill, complete with turbochargers mounted up high between the cylinder banks.
Opting for the middle of the road mill sends buyers back into the realm of the six - cylinder with Ford's familiar 3.5 L naturally - aspirated V6.
The Focus Titanium's engine is the same 2.0 - liter, four - cylinder mill found with the base model, which means 160 horsepower and 146 lb - ft of torque, and buyers can choose between either a five - speed manual or a six - speed dual - clutch automated manual gearbox.
Under the bonnet resides the same MR20DD 2.0 litre direct - injected twin - CVTC four - cylinder mill as before, mated to an Xtronic CVT equipped with Adaptive Shift Control (ASC), which detects corners or hills through the vehicle's lateral acceleration sensor, matching the ratios to suit different driving conditions.
Stick with the 2.7 - liter, 185 - horsepower four - cylinder mill that it comes with out of the box and you'll end up with a paltry 1,500 lbs of trailer towing ability.
Volkswagen states that the next generation Passat will get two new engines which include a 2.0 - litre 4 - cylinder bi-turbo diesel mill that produces 240 PS of power and 500 Nm of torque at 1750 RPM and will come with a very exclusive new 7 - speed DSG automatic transmission and 4Motion four - wheel drive technology.
Just like the new Civic Sedan, the two - door model can be had with either a 2.0 - liter naturally - aspirated four - cylinder engine with 158 horsepower and 138 pound - feet of torque or a 1.5 - liter turbocharged mill with 174 hp and 162 lb - ft of torque.
The new Toyota Prius Hybrid is powered by a 1.8 - litre four - cylinder petrol mill, which works in tandem with an electric motor.
The Tata Nexon was launched back in September last year with 2 engine options — a 1.2 - litre 3 - cylinder turbocharged petrol motor and a 1.5 - litre 4 - cylinder turbocharged diesel mill.
In the engine department, the 2017 Audi Q5 is expected to carry over the same engine lineup from the all - new Audi A4, including the top of the line turbocharged petrol and turbo - diesel four - cylinder mills, along with the new twin - turbo V6.
Engine options will include a range of four cylinder petrol and diesel mills, along with a plug - in hybrid variant.
The i8 Roadster combines an electric motor with a 1.5 - litre three - cylinder turbo - petrol mill to make a combined total of 170kW / 320Nm.
There's really not much to choose from because the Mini JCW only comes with one engine variant: the 2.0 - liter four - cylinder mill whose behavior we described above.
Plus, the WRX's brand - new 2.0 - liter 4 - cylinder returns admirable mpg figures of 21 city / 28 highway, while the STI's carryover mill makes do with last year's rather underwhelming 17/23 rating.
The company has equipped this Chevrolet Sail U-Va with a performance packed 1.2 - litre petrol mill, which has been incorporated with four cylinders and can displace 1199cc, which is rather good for the Indian road conditions.
This four - cylinder mill produces 141bhp / 340Nm and is mated to a seven - speed DSG and 4MOTION all - wheel drive system with primary orientation being towards to the front wheels.
The car has received its mid-life update in 2017 and with a few changes to the exterior and the interior, it has now become a petrol - only car after ditching the 2 - cylinder diesel mill.
The Sonic's base 1.8 - liter four - cylinder motor is good for 138 horsepower, but upgrading to the available 1.4 - liter turbocharged four - cylinder mill introduces 148 lb - ft of torque (while maintaining the same number of horses at the crank) along with improved fuel mileage figures of 29 - mpg city and 40 - mpg highway.
Engine choices will start with four - cylinder mills, but it should expand to include high - performance models later.
The Ecotec ignites and the cabin gets a pretty decent new atmosphere with bass and baritone notes, though the notes should still be lower so as to hide the fact that it's a four - cylinder mill at our feet.
The most important engine though has been the all - new 2.0 - litre 4 - cylinder bi-turbo diesel mill that produces 240 PS of power and 500 Nm of torque at 1750 RPM and will come with a very exclusive new 7 - speed DSG automatic transmission and 4Motion four - wheel drive technology.
The 2015 Miata represents some of the most fun you can have with a 167 - horsepower, 2.0 - liter four - cylinder mill.
This mill has 4 - cylinders that are further integrated with sixteen valves.
A trio of four - cylinder engine options await 2014 Ford Escape buyers, starting with a 2.5 - liter that's good for 168 horsepower and ranging up past a 178 horsepower, 1.6 - liter turbocharged EcoBoost mill all the way to a 240 horsepower, 2.0 - liter EcoBoost option (also turbocharged).
Before the drive, I was, admittedly, skeptical of a 4600 - pound crossover's ability to get out of its own way with just a four - cylinder mill and CVT, let alone tow two and a half tons.
The Flex can be ordered with a naturally - aspirated V - 6 engine that yields 285 horsepower from its 3.5 liters, or a twin - turbo six - cylinder EcoBoost mill that boosts output to 365 horsepower.
This means the range is made of an entry - level three - cylinder 1.0 - liter petrol unit with 68 HP and a 1.33 - liter gasoline mill delivering 98 HP and 125 Nm of torque.
This four cylinder based mill is incorporated with a direct injection fuel supply system.
In Europe, the Volvo V60 Plug - In Hybrid makes use of a 2.4 - liter, five - cylinder turbodiesel engine and a single electric motor, with the diesel unit providing the front wheels with 215 horsepower and the battery - powered mill dumping 70 horses to the rear.
All this to help showcase a Civic with an 2.0 - liter turbocharged four - cylinder engine that could get an estimated 280 horsepower, a huge leap from the average run of the mill Civic.
The latest secondhand 3 Series convertibles provide a 3.0 - liter, 230 horsepower six - cylinder base motor, with an upgrade available in the form of a turbocharged 3.0 - liter, six - cylinder mill that ups the ante to 300 horses.
Although the turbocharged 2.0 - liter 4 - cylinder found in the base model is stout enough, the extra weight of the convertible mechanism almost demands that buyers go for the turbocharged 3.0 - liter 6 - cylinder mill found in the 435i, which brings with it 300 horses.
The reliable Camry can be had with either a base 178 horsepower, 2.5 - liter four - cylinder engine or a more robust 268 horsepower, 3.5 - liter mill.
The standard mill is a 2.5 - liter four - cylinder with 176 horsepower and 172 pound - feet of torque.
Under the skin, the smart fortwo cabrio is powered by a choice of two rear - mounted, three - cylinder petrol engines — a naturally - aspirated mill with 71 hp and 91 Nm of torque or a more powerful turbocharged unit with 90 hp and 135 Nm of twist.
The car wears an AMG 2.0 litre twin - scroll turbo four - pot, the M132, with a maximum charge pressure of 1.8 bar, and Merc proudly states that with the abovementioned output figures, the hand - built, EU6 emissions - ready mill is the most powerful series production four - cylinder engine in the world.
The newly developed engine, known under the internal codename S55 B30, shares its 84.0 mm bore and 89.6 mm stroke with BMW's standard turbocharged 3.0 - liter in - line six - cylinder direct - injection gasoline mill, the M55 used across the German car maker's lineup, endowing the aluminum block unit with an overall swept volume of 2,979 cc.
As noted above, the Kizashi comes with a 2.4 - liter four cylinder, a run - of - the - mill mill with an output of 185 horsepower and 170 pound - feet of torque.
The T5 Turbo sits at the bottom of the range with 254 ponies and 258 pound - feet of torque, while the T6 Turbo, essentially the same supercharged and turbocharged four - cylinder mill found in the hybrid model, cranks out 316 horsepower and 295 pound - feet of twist.
The all four - cylinder TDI range starts with a front - wheel drive 1.6 - litre unit (85kW / 250Nm) and is topped by a pair of 2.0 - litre mills developing 110kW / 340Nm in front - wheel drive guise and 140kW / 400Nm with quattro.
The model featured a revised 2.0 - liter turbocharged four - cylinder with a larger air box and bigger intercooler that allowed the mill to make more power and torque than the previous example.
While the 2017 Subaru Forester 2.0 XT is powered by the same turbocharged, 250 horsepower four cylinder mill as the last one we drove a few years ago (which we continue to be fans of today), Subaru has sought to keep the Forester fresh with a host of tweaks inside and out that improve on the recipe rather than reinventing it.
There is also a Turbo model with a 1.6 - liter turbocharged four - cylinder mill churning 201 hp and 195 lb - ft of torque, which is more respectable, but still isn't fast enough to match its sporty style.
This mill comprises of four cylinders along with sixteen valves, which receives fuel through common rail direct fuel injection system.
a b c d e f g h i j k l m n o p q r s t u v w x y z