Engine: supercharged 158 - horsepower OHC in - line four -
cylinder with fuel injection - Transmission: five - speed manual - Suspension, front, independent MacPherson struts, lower wishbones, coil springs, stabilizer bar; rear, independent torsion beam axle with track correcting bushings, shocks and coil springs - Brakes: four - wheel power disc - Performance: 0 - 60 mph, 7.5 seconds - Weight: 2,660 pounds - Base price: $ 17,900
Engine: supercharged 158 - horsepower OHC in - line four -
cylinder with fuel injection - Transmission: five - speed manual
Not exact matches
Envirofit's fix replaces the engine's carburetor, which mixes the air and
fuel before they enter the combustion chamber,
with a direct in -
cylinder fuel -
injection system.
We'd hope to attract them
with the great looks of the car, a new high - technology direct -
injection six -
cylinder engine, good
fuel economy, all the standard equipment, and higher technology features.»
Limited, handbuilt production began in 1968 and engine choices would include a series of gas and diesel four -
cylinders, some
with dual overhead cams and
fuel injection — heady stuff for the time.
The 2.8 - liter turbodiesel truck engine sports an iron
cylinder block
with an aluminum dual - overhead cam head, forged steel crankshaft and connecting rods, a common rail direct
injection fuel system, and a balance shaft to run the oil pump and increase smoothness.
This all - new four -
cylinder engine runs smooth thanks to internal balance shafts to counteract vibration, combines power
with good
fuel efficiency thanks to variable valve timing / lift and direct
fuel injection, and operates
with an easy, free - revving liveliness thanks to careful detailing to reduce friction and because, well, that's just the Honda way.
The engine has the same measurements as the previous Versa's 1.6 - liter, but Nissan says it's new, and the mill utilizes variable valve timing on both intake and exhaust cycles and squirts
fuel via two injectors per
cylinder (not to be confused
with direct
injection, mind you).
Compared
with the last - gen TT RS, the 2.5 - liter turbo five in the new - for - 2018 model breathes better (thanks to new
cylinder head
with variable valve lift and duration timing on the exhaust cam), weighs nearly 60 pounds less (an aluminum block, magnesium upper sump, and other fat - reducing measures), and makes considerably more power, the byproduct of new port
fuel injection and an increase in boost pressure from 18.1 to 19.6 psi.
All engines get redesigned combustion systems,
with gas direct -
injection, continuously variable valve timing and
cylinder deactivation, which GM calls Active
Fuel Management.
It gets 470 hp out of the M88,
with its Kugelfischer mechanical
fuel injection and 24 - valve, DOHC, six -
cylinder head.
TDI is a trademarked name that Volkswagen has given its diesel
injections — it stands for Turbo Direct
Injection, and describes the technology that injects the diesel
fuel under high pressure directly into the
cylinder, which has been force - fed
with pressurized air from the turbocharger.
Mainly thanks to direct
fuel injection with stratified charge (it sounds better if you say iniezione diretta stratificata), and the 12.5:1 compression ratio it allows because squirting the
fuel directly into the
cylinder has the effect of cooling the air that has been heated by compression.
More space between the
cylinders means that Harley engineers were able to replace the traditional motorcycle carburetors parts
with a more advanced, computer - controlled
fuel injection system, which allows for easier cold starts, cleaner emissions, and better
fuel economy, all important to young buyers.
The Golf GTI features a 2.0 litre turbocharged inline 4 -
cylinder petrol engine
with Fuel Stratified
Injection (FSI) direct - injection technology, which produces 200PS (147 kW /
Injection (FSI) direct -
injection technology, which produces 200PS (147 kW /
injection technology, which produces 200PS (147 kW / 197 bhp).
For an automatic engine start, the
cylinder with the most favourable piston position receives an
injection of
fuel into its combustion chamber.
This increase in power was possible thanks to the twin - turbo six -
cylinder horizontally opposed engines
with direct
fuel injection (DFI) and VarioCam Plus.
The GTI comes
with VW's 4 -
cylinder 2.0 L Turbo
Fuel Stratified
Injection (FSI) which makes 200 PS (147 kW; 197 bhp) and 280 N ⋅ m (207 lbf ⋅ ft) torque.
A powerful single - piece 12 -
cylinder 3000 cc boxer engine
with a Spica
fuel injection system that produced 500 HP at 1500 rpm.
3.0 - liter dual overhead cam (DOHC), 24 - valve inline turbocharged 300 - hp 6 -
cylinder engine
with twin - turbo technology, piezo
fuel injection, and Double - VANOS steplessly variable valve timing
4A - F (1987 — 1990) is a type of engine
with a carburetor
fuel injection system and 16 - valve
cylinder head.
The Niro PHEV pairs an all - aluminum, efficient 1.6 - liter GDI (gasoline direct
injection) four -
cylinder engine
with an 8.9 kWh (59 kW) lithium - polymer battery pack and a powerful 60 - HP (44.5 kW) electric motor, a set - up for optimum
fuel efficiency and electrically driven range.
This petrol motor has been fitted
with 4
cylinders that further have 16 valves in it along
with a PGM - Fi (programmed electronic
fuel injection) system, which helps this sedan in generating a healthy mileage.
All of these engines are fitted
with three technologies aimed at improving
fuel economy (which is where the 3 in the EcoTec3 name comes from): direct
fuel injection, continuously variable valve timing, and active
fuel management, better known as
cylinder deactivation.
Under the 2019 Corolla Hatcback's hood lies a 2 - liter (1,987 cc), four -
cylinder Dynamic Force gasoline engine (M20A - FKS) fitted
with Toyota's D - 4S
fuel injection setup and dual VVT - i (variable valve timing).
The innovative 3.0 - litre V - 6 CRD engine
with five - speed Auto Stick transmission features Bosch high - pressure
fuel injection (1600 + bar), a Variable - geometry Turbo (VGT), four valves per
cylinder with dual overhead camshafts and Piezo injectors
with a 0.1 millisecond response time.
4A - C (1982 — 1986) is the first type
with a carburetor
fuel injection system and 8 - valve
cylinder head.
This mid-engine concept car
with rear - wheel drive and 2 seats boasts an all - new 4 -
cylinder 1.75 liter turbo petrol engine paired
with a direct
fuel injection and the revolutionary Alfa Romeo TCT automatic transmission, known in its segment for its high speed of activation and limited weight.
The 86's engine, known by the Toyota code 4U - GSE and Subaru code FA20, is a naturally aspirated four -
cylinder engine that uses Subaru's horizontally opposed boxer engine design,
with the addition of Toyota's D - 4S
injection system, which uses both direct and port
fuel injection.
• Gen IV
fuel injection nylon manifold used on the 2009 Corvette Z06 LS7 engine • Fully assembled
with injectors,
fuel rail, 90 mm ETC throttle body and gaskets • For use only
with LS7 and LSX / LS7 - style
cylinder heads NOTE: Must use Controller Kit P / N 19243066 source.
The four -
cylinder 2.8 L Duramax engine features technology that you would see on the V - 8 diesel that many late - model diesel owners would be familiar
with, including a variable - geometry turbocharger, common rail direct
fuel injection, and B20 bio-diesel capability.
It uses multi-point
fuel injection, and has 4 valves per
cylinder with VVT - i whilst some of the series do not have it.The engine is also exceptionally light
with a 69 kg weight
with all ancillaries.
The LS5.5 R engines are equipped
with dry - sump oiling systems, CNC - ported aluminum
cylinder heads
with titanium intake and exhaust valves, and sequential electronic port
fuel injection.
Key features include high pressure direct
injection alongside traditional port
injection that allows the car to select its
fuelling method to optimise efficiency, along
with cylinder deactivation.
Engine: All together, take a breath and say — 2 - liter, four -
cylinder, in - line engine
with electronic
fuel injection, 16 valves, double - overhead camshafts, turbocharger, intercooler and engine tuning kit.
The company designed this turbocharged petrol engine
with 4 -
cylinders and 16 - valves and incorporated it
with direct
injection fuel supply system, which will make it even powerful than any other engine of its class.
The combination of BMW Twin Turbo Technology and High Precision
Injection offers a level of performance a naturally - aspirated power unit would only be able to provide
with a larger number of
cylinders and extra displacement, meaning far higher weight and significantly greater
fuel consumption.
The car is faster this year because its little three -
cylinder engine has been fitted
with fuel injection, raising its horsepower from 66 to 73.
Powering the new Sentra is a 1.6 - liter, four -
cylinder, DOHC engine
with variable valve timing and four valves per
cylinder that is fed by sequential multipoint
fuel injection.
Mini offers two versions of the Cooper Hardtop four - door,
with the fastest being the S model, which is equipped
with a turbocharged 2.0 - liter inline four -
cylinder engine
with dual Vanos and Valvetronic valve control and direct
fuel injection.
Bentley calls it the most advanced 12 -
cylinder engine in the world; it features direct and indirect
fuel injection, along
with Variable Displacement
cylinder deactivation, which takes it down to six
cylinders under a light load.
The Mazda 3 is equipped
with a few different engine options, but the most powerful is a Skyactiv - G 2.5 - liter inline four -
cylinder with dual overheads cams, variable valve timing, four valves per
cylinder, direct
fuel injection, and all - aluminum construction.
This unusually good balance of performance and
fuel consumption results from the fundamental design and layout of the six -
cylinder combining BMW Twin Turbo Technology
with High Precision
Injection.
Engine: 125 - horsepower, 2.8 - liter V - 6
with aluminum
cylinder heads and rocker covers, and electronic Multi-Port
Fuel Injection.
It has a cast iron engine block
with MPFI (
fuel injection) and an aluminum SOHC
cylinder head
with forged steel connecting rods and four valves per
cylinder.
The punchy four -
cylinder now features intake valve lift control or iVLC, direct
injection and other
fuel - saving technologies working in conjunction
with a stop / start system to return 25 mpg in the city and 36 mpg on the highway.
Nissan has developed a new 1.6 - liter 4 -
cylinder MR16DDT engine
with Direct
Injection Gasoline technology — combining a turbocharger
with a low displacement engine to achieve both higher power output and lower
fuel consumption.
Yes, there was a 3.6 - liter V - 6 under the hood of the 2007 model, but this one is considerably different,
with a host of internal and electronic changes, as well as direct
injection, which is a more efficient method of delivering
fuel to the
cylinders.
This hatchback is fitted
with a power packed 1.5 - litre dCi engine, which has been further equipped
with four
cylinders that have a total of eight valves and the highly acclaimed common rail direct
injection fuel supply system in it.
Among the highlights of the four -
cylinder engine are its direct -
injection system
with exhaust gas turbocharging, an enhanced combustion system and extended stratification ranges for lean - burn operation using fast - acting injectors for the multiple
fuel injections, and multi-spark ignition according to need.