Sentences with phrase «decreased turning radius»

They work in - phase for highway - speed stability, counter-steer to decrease turning radius, and toe in while braking to decrease stopping distance.

At low speeds it decreases the turning radius, and at higher speeds it increases manoeuvrability and stability.

Not exact matches

This truth was evident the moment we turned into the first decreasing - radius corner on the coastal roads south of Cagliari.

A few of its turns decrease in radius, but only one of them qualifies as truly intimidating.

Smash the optional carbon ceramic brakes, turn in, gas it, let the e-diff grab the rear end by the scruff, and lean on the aero as you whip around that decreasing radius with hair - ripping grip.

We're doing 50 mph over the packed, corrugated earth, charging into Turn 1 — a wild, fast sweeper with deep banking and a decreasing radius.

The circuit flows nicely, with decreasing - radius turns and several 90 - plus mph kinks per lap; the layout is 2.3 miles of undulating busyness.

Bombing through the hilly passes outside of Maranello, the F12tdf comes alive again, tackling tight esses and decreasing - radius turns deftly.

GingerMan is a collection slow - to medium - speed turns of varying radius, decreasing and increasing, an excellent place to ferret out understeer.

I don't detect any traction control interference there, but I do feel it a few times exiting turn 7, a deceiving late apex, decreasing - radius turn that requires more steering than you'd expect.

Even around unfamiliar, decreasing radius turns, it just absorbed the undulations and kept rocketing toward the horizon.

If you order the car without the touring package, the tire size is 15 inches, and the turning radius decreases to 36.5 feet.

You have an increasing radius corner at Turn One, a bit of a decreasing radius in the last corner.

That means some changes at the Smyrna, Tenn., plant to accommodate such a long vehicle, including modifying the paint shop, increasing the conveyer turn radius and decreasing the slope of up - and - down angles as the vehicles are moved about the factory floor, said Larry Dominique, chief product specialist for trucks.

In case of tyre pressure loss, the rolling radius of the affected wheel decreases, and the wheel turns faster at the same vehicle speed.