Defending manufacturer of domestic cleaning appliances in class action against allegations that
design defect causes build - up of mould, mildew and odour.
Not exact matches
The proposed project is
designed to identify some of the changes that
cause these age - related
defects.
Toyota has recalled nearly eight million vehicles in the United States for two mechanical safety
defects that can
cause unintended acceleration: «sticking» accelerator pedals and a
design flaw that can
cause accelerator pedals to become trapped by floor mats.
However, if a strut fails prior to 50,000 miles of service, the
causes are typically: 1) product /
design / manufacturing
defect; 2) extreme...
In addition, this Warranty does not apply: (a) to consumable parts that are
designed to diminish over time, unless failure has occurred due to a
defect in materials or workmanship; (b) to damage
caused by a third party device or service (including upgrades and expansions), or (c) to obsolescence or lack of utility with future versions of external hardware or software, including, but not limited to mobile devices.
And the first question designers need to ask themselves when getting started is quite a doozy.If our intent is to, by
design, fill the oceans with plastic, create products that
cause cancer and birth
defects, acidify the oceans... then we're doing a really great job, McDonough stated in his keynote.
And while a
defect in
design is a
cause for a product liability lawsuit, it may be difficult for Pa personal injury lawyers to bring such lawsuits, absent any real injury.
Flying in bad weather, pilot error, improper maintenance,
design defects, manufacturing problems, product failures, and air traffic control errors are just some of the many
causes of aviation accidents.
• You were driving your car in a safe manner with no negligent conduct on your part • You were not aware of the product or
design defect • You had not experienced this type of performance issue before the accident • The
design or product
defect was the legal
cause of your accident and injuries
Plaintiffs began filing lawsuits across the country claiming the filters
caused harm and death, alleging manufacturers» negligence, failure to warn,
design defects, manufacturing
defects, breach of implied warranty and negligent misrepresentation on the part the companies and their subsidiaries.
Design Defect: a mistake or flaw in the design of a product that causes it to be dangerous when used for its intended p
Design Defect: a mistake or flaw in the
design of a product that causes it to be dangerous when used for its intended p
design of a product that
causes it to be dangerous when used for its intended purpose
Defects in
design are a huge
cause of action for Pa personal injury lawyers.
While a number of factors can contribute to the
cause of a car accident such as road
design, weather conditions, driver skill level, driver impairment (alcohol or drugs), driver behavior, road debris, or a
defect in automotive
design, by far the majority of car accidents can be traced back to some form of driver negligence.
Automobile
defects, such as seat belts, tire
defects and unsafe SUV
designs causing rollovers and roof crush
Unfortunately, some ATVs have
design or manufacturing
defects that result in their having a tendency to roll over and
cause serious injuries.
If your injury was
caused by a
defect in the
design or manufacturing process, then the person or company responsible for the
defect may be liable to compensate you for your injuries through a product liability claim.
Such liability can occur, for example, if a product, such as a car that is involved in a vehicle accident, contains a
defect in manufacture or
design and the
defect is found to have been a
cause of a fetus's death.
But all too often these industrial products come with manufacturing and
design defects that can
cause serious injury and even death.
The three different
defects that could
cause injury are manufacturing,
design, and marketing
defects.
If a
design, manufacturing or labeling
defect caused or contributed to your injuries, we can help you file a product liability lawsuit to recover compensation for your medical bills and other damages.
In addition, these
defects caused the risks associated with the
design of the Ford Pinto's fuel system to outweigh its benefits.
Accidental Fire — If your vehicle suddenly caught fire with no apparent
cause, it is possible that a
design or manufacturing
defect caused a flammable substance within the car to ignite.
Many
defects that
cause injury stem from faulty
design or faulty manufacturing of the product.
If you have been under fire for allegedly
causing a negligent
design, an electrical problem or another
defect, consult an experienced lawyer to protect your reputation.
When a tire fails before a crash and thereby
causes a crash - and is determined to have done so due to a
design, manufacturing, or warnings
defect, the tire manufacturer and others in the chain of the tire's production and distribution may be held strictly liable for consequent damages suffered by injured victims or deceased victims» survivors.
Manufacturing and
design defects can
cause rollover accidents, so we will investigate whether this element was present in your crash.
These types of product liability cases are not traditional product liability cases the way, maybe, most of the public thinks of product liability cases, but they
cause catastrophic injury to plaintiffs who don't deserve these types of problems because of a
defect in the product, either the way it was
designed or the way it was manufactured.
10 The focus of the open and obvious defense is not whether the
defect itself (e.g. failure to warn,
design defect, etc.) was obvious, but whether the hazard or risk which ultimately
caused the injury was clearly apparent.11 A hazard or risk is open and obvious, «if the person using the product is or should be aware of the risk» 12 but, proceeds to act in a manner where a reasonably prudent person could or should have anticipated the resulting accident.13
A
design defect is a flaw in the original blueprint of a product that
causes it to be unreasonably dangerous and creates a hazard for potential users.
People who are injured in accidents that are
caused by
defects in the
design or the equipment may be able to recover damages by filing personal injury lawsuits based on claims of products liability against the vehicle manufacturers.
Generally, product - liability actions are brought by plaintiffs who have suffered an injury that was
caused by a
defect in a product's
design or manufacture.
Cases can develop from many other situations: slip and falls on a slick surface or ice;
defects in roadways such as missing road signs, bad intersections or pavement
defects; holes or uneven surfaces in parking lots, sidewalks or floors; unmarked drop - offs, ledges, culverts or holes, dangerous retail layouts or
designs, including sharp corners and displays that may
cause injury to children.
If faulty
design, manufacturing or labeling was responsible for your accident and subsequent injuries, your attorney will show what specific
defect caused your accident and how.
The party who brings a product liability claim, that is a lawsuit asserting that the vehicle or a part of the vehicle was
designed or manufactured with
defects that
caused the injuries or death must be able to prove to a preponderance of the evidence that more probably true than not the
cause of such injuries or death was the fault of that manufacturer and distributor.
If the blowout was
caused by a manufacturing or
design defect, a product liability lawsuit can be brought against the manufacturer.
The establishment of a
defect in manufacture or
design, an injury
caused by the
defect, and damages sustained as a result of the injury are all that is required to establish the requisite elements of this form of personal - injury
cause of action.
Defects in a car or its tires and factors such as negligent roadway
design can also
cause car accidents.
At George Sink, P.A. Injury Lawyers, we fight for those who were harmed due to road
defects, car
design defects, car accidents
caused by others, and more — and without regard to the education or income level of those who are harmed.
If you've been injured in an accident
caused by a manufacturing or
design defect, contact us online or call us at (800) 294-0055.
Design defects predate manufacture and are the most common
cause of product recalls.
If a manufacturing or
design defect in the school bus that was involved in an accident is found to have been a
cause of the accident, a product - liability action may be brought against the manufacturer and anyone else in the chain of distribution.
Plaintiff Linda Secrest filed suit against Merck, Fosamax's manufacturer, in Florida in 2006, asserting
causes of action for
design defects and failure to warn of the drug's risks.
In the last month, we've seen two more appellate decisions definitively rejecting the idea of some sort of separate
cause of action — apart from warning or
design defect — for «failure to test,» whatever that might be.
Product recalls occur, if there is a
defect in its operation or
design, which could
cause danger to the owner's.
For many iPhone 6 and iPhone 6 Plus owners out there in the wild, a
design defect is apparently
causing some huge issues.
The company said that its investigation revealed battery
defects and
design flaws in the batteries it had used with its Galaxy Note 7 that
caused the trouble.
Key Qualifications • 6 months» hands - on experience in plumbing field • Highly skilled in troubleshooting and adapting to different plumbing situations • Willing to travel to various site locations • Demonstrated ability to work accurately and efficiently • In - depth knowledge of materials, methods, and the tools involved in the plumbing • Thorough understanding of plumbing machines including their
designs, uses, repair, and maintenance • Profound ability to inspect equipment, structures, or materials to make out the
cause of errors or other problems or
defects
Successful in locating root
cause of
defects and redesigned procedures to resolve issues; implemented
designs for printed circuit boards and created high quality fabrication and assembly drawings.