Blind Spot Detection
detects vehicles behind the C - pillars and in other blind spots; Lane Change Assist detects approaching vehicles when changing lanes, and Rear Cross Traffic Alert detects close vehicles while reversing, such as out of a parking space or driveway.
Not exact matches
Researchers at Clemson determined that a reliable, less intrusive way to
detect fatigue or drowsiness in a driver is to monitor
vehicle behavior rather than the biometrics of the person
behind the wheel.
An optional add - on — one that should come standard — is Reverse Brake Assist, which can automatically brake the
vehicle if it
detects an object (or a person, presumably)
behind it while backing up using the rear sensors and camera.
Featuring four inconspicuous sensors in the rear end, the system audibly alerts the driver to the presence of obstacles
detected behind the
vehicle.
Once you've arrived at an intersection, Turn Assist issues a visual warning if it
detects objects approaching in the blind spots
behind your
vehicle.
When approaching an intersection, Turn Assist issues a visual warning if it
detects objects approaching in the blind spots
behind your
vehicle.
It can
detect objects
behind the Armada when the
vehicle's backing up, then automatically apply the brakes in certain scenarios.
system
detects objects crossing
behind the
vehicle, and sounds an alarm.
In addition, you can also get the available Rear Cross Traffic Alert (RCTA) in your Forte that gives you an audible warning and a light on your rearview mirror when it
detects an object or other
vehicle behind you.
These systems may not
detect every object
behind or alongside the
vehicle or in the
vehicle's blind spot or direction of travel.
It can then warn you if a large stationary object or approaching
vehicle is
detected behind your
vehicle, and even apply the brakes if needed.
If you're unable to
detect that
vehicle following closely
behind you, your minivan will do all the work, making sure you don't cross into its path.
Once you've arrived at an intersection, Turn Safety Assist issues a visual warning if it
detects objects approaching in the blind spots
behind your
vehicle.
These systems produce audible, visual or tactile signals to warn a driver if an object is
detected behind a reversing
vehicle.
The Frontal Collision Warning function
detects an imminent risk of collision with preceding
vehicles, and prepares the
vehicle systems for a possible impact from
vehicles behind.
This includes lane - keep assist, driver attention alert, an electronic parking brake and adaptive LED headlights to complement existing systems such as Smart City Brake Support and Pre-Collision Throttle Control — which has been further developed to
detect vehicles travelling
behind, as well as in front — blind - spot monitoring and a rear cross-traffic alert function.
Rear sensors also pair with the camera to
detect objects or people that are
behind the
vehicle when the car is in use.
can
detect objects
behind your
vehicle and provide an audible and visual warning so that you can react.
Rear Cross Traffic Alert (RCTA) 3 scans the area
behind the
vehicle when backing from a parking space and will alert the driver with an audible warning if cross traffic is
detected.
When you're backing out of a parking space, this available feature can
detect and warn you about
detected vehicles you might not see
behind you approaching from either side.
Aviator offers Reverse Brake Assist, an enhanced driver - assist technology that integrates rear sensors and a camera to provide automatic braking if an obstacle is
detected behind the
vehicle.
The new Cross Traffic Alert (CTA) system utilizes radar to
detect a moving
vehicle behind the Murano approaching from either side of the parking space.
The available Blind Spot Information (BSI) system continuously monitors
behind and to the sides of the RDX for other
vehicles, helping to alert the driver if a
vehicle is
detected.
At speeds over 60 kilometers per hour, the Rear
Vehicle Monitoring (RVM) system
detects vehicles approaching from
behind and alerts the driver.
All new models will have «
vehicle reverse gear sensor system», which helps the driver
detect any object
behind the car as well as «manual override» feature.
A Blind Spot Information System is an available added - safety option — the system signals when another
vehicle is
detected in an adjacent lane
behind either rear wheel.
Well, it has already arrived in the 2017 E-Class, and it will allow the
vehicle to communicate with
vehicles ahead of it or
behind it and
detect if there is any potential dangers lurking.
Audi side assist monitors the space
behind the A4 by radar and
detects any
vehicles in the blind spot, for example.
The Rear
Vehicle Monitoring system, which
detects vehicles approaching from
behind and alerts the driver, is equipped on some model grades
When the driver moves the transmission shift handle into reverse, the center color LCD display will show what the camera lens can
detect within its field of vision
behind the
vehicle.
Rear proximity alerts sounds an audible beep when reversing if an obstruction is
detected behind the
vehicle, which increases in urgency as the distance closes.
When driving at speeds over 60 kilometers per hour, this system uses radar to
detect vehicles approaching from
behind and alerts the driver.
The Rear Cross-Traffic Alert also signals on the corresponding mirror if a
vehicle is
detected crossing
behind as you're pulling out of a parking space.
At speeds over 60km / h, radar sensors mounted in the left and right sides of the rear bumper
detect vehicles approaching from
behind in the adjacent lanes.
Cross-traffic alert can
detect traffic
behind your
vehicle as you're slowly backing out of a parking spot or driveway.
A camera mounted
behind the windshield scans road lane markings to determine
vehicle position and
detects a lane departure.
The Automatic High Beam system uses an in -
vehicle camera to
detect the headlights of oncoming car or the taillights of cars
behind your
vehicle, and switches between low - and high - beams accordingly.
When a
vehicle enters your blind spot, the BLIS system will
detect a radar system located
behind the rear bumper.
Detects moving
vehicles and objects
behind the car when reverse gear is selected, warning the driver with visual and audible alerts.
New for 2012 is an available Advance Package that incorporates all - new ventilated front seats, larger wheels and a new blind spot information (BSI) system that alerts the driver when another
vehicle is
detected behind the driver in an adjacent lane.
Backup Collision Intervention helps
detect crossing traffic and large, stationary objects
behind the
vehicle, and Forward Emergency Braking
detects danger of collision with a
vehicle ahead and warns the driver with visual and audible warnings.
The available Blind Spot Information System (BLIS ®) signals when another
vehicle is
detected in an adjacent lane
behind either rear wheel.
6 Rear - Camera Display is not a substitute for safe driving, and may not
detect all objects
behind vehicle.
In testing, parking sensors scored poorly in their ability to
detect a child
behind a reversing
vehicle, so a rearview camera with a screen in the rearview mirror or on the dash is the most likely solution.
It may be that the sensors, which
detect objects up to 8 feet
behind the
vehicle at speeds less than 5 mph, gave drivers a false sense of security, so they paid less attention to the camera display.
The standard Audi Pre Sense Basic system warns the driver, pre-tensions the seatbelts and closes the windows if a potential collision is
detected, while Pre Sense Rear (also standard) uses the brake light to warn traffic
behind the
vehicle in the event of a potential rear collision.
In addition, the Rear
Vehicle Monitoring system
detects vehicles approaching from
behind on either side when driving on the highway.
A rear back - up camera, part of the available navigation package, is mounted near the top of the license plate surround and projects a color image of what the camera lens can
detect behind the
vehicle onto the navigation screen whenever the
vehicle is in reverse.
Safety features like the ParkSense ® Front / Rear Park Assist System can be added to help you navigate tight spaces,
detecting objects
behind your
vehicle while in reverse and providing audible warnings if you get too close to an object.
The standard blind spot information (BSI) system uses two radar sensors to continually monitor conditions
behind the RLX and alert the driver if another
vehicle is
detected in close proximity - especially in the blind spot of the driver.