You can now just poke
your device standby button and swipe the screen down to see what alerts you have.
Not exact matches
I know that a lot of people don't like the Xoom's placement of the lock / power
button, but having used several Android tablets, it is my favorite placement for a power
button because it limits the frequency with which a user accidently hits the
button and wakes the
device up or sends it to
standby.
Once again you'll find the
standby button in place on the right hand edge of the
device with volume controls just below.
Around the side of the
device you'll find volume
buttons and across the top the power /
standby button, micro HDMI and 3.5 mm sockets.
It has the same design touches as its smartphone sibling too, with the use of an aluminium
standby button and a similar volume rocker, giving a family feel to these
devices.
This will fire up the camera from
standby, a little like a long press on the camera
button on Sony Xperia
devices.
Otherwise the One X is rather minimalistic, featuring only microUSB and 3.5 mm headset ports, a volume rocker and power on / off /
standby button, and an 8MP camera with LED flash framed in the middle of the
device's upper rear.
The power /
standby button sits next to the volume rocker on the top of the
device; there's a Micro-USB connection, along with a 3.5 mm headphone socket on the left and over to the right is micro-HDMI, to hook up to a bigger display.
Anyone know how to make the power
button on Clover Trail
devices to just turn the screen off without entering Connected
Standby?
The good news here is that you don't actually have to use the power
button when bringing the
device out of
standby (the
device is on but display is powered off).
Flip the Xoom over and you'll find a 5 - megapixel camera, supported by a dual LED «flash», grills for the stereo speakers and the only proper
button on the
device, which is the power /
standby button, working in the same way as the power
button on every other Android
device.
The
device's power /
standby button, which also operates as the IR blaster, sits on the top of the
device, and while the placement isn't horrible, the
button could have been raised a bit more to make it easier to press.
There are no onboard controls — not even a power
button, since the
device remains in constant
standby mode.
Around the outside of the
device you can find the
standby button, the new microSIM slot (which has some improved benefits over the standard SIM card), a speaker, a microphone, another microphone (that helps remove background noise), a headphone jack, a silent toggle, and two separate volume
buttons.
There's the option to lock the
device as soon as the screen goes to sleep or when you press the
standby button.
The only physical
buttons are the textured power /
standby switch and the volume rocker, which are both located on the right side of the
device.
Moving around the sides, the power /
standby button sits above the volume rocker on the right side of the
device, while the top features a center - mounted 3.5 mm headphone jack — a design element we've come to expect from Motorola
devices.
Now, for a tour of the physical particularities of the tablet: the
device houses the power /
standby button and volume rocker on the top side on the left.
Many Android Wear
devices also feature a
button, often used like a
standby button for the display, waking it up or dimming it.
Note that this is different to the Galaxy S7 and previous
devices that used a combination of the
standby button and the home
button.
This will fire up the camera from
standby, a little like a long press on the camera
button on Sony Xperia
devices.
Like every Windows Phone
device you are able to start the camera in
standby mode by pressing and holding the dedicated camera
button.