"Drawer sides" refers to the vertical panels or boards that make up the sides of a drawer, providing structure and support to hold items inside.
Full definition
Areas to distress would be around the knobs on a chest of drawers, the legs of chairs, the back of chairs, and
around drawer sides.
I use them with my Sonny Cosmetics Acrylic Makeup organizers which fit two
per drawer side by side.
It can not be underestimated how difficult it is to win a Premier League match, from being a goal behind; only top -
drawer sides are capable and it is what Manchester United have been doing for 15 years.
The paint is a perfect neutral, and
the drawer sides have a little fun color surprise!!
The darker silver gray on the drawer front and shelf, and the lighter silver - gray on
the drawer sides.
Using mod podge and an old brush go ahead and decoupage the wallpaper to the front of the drawer, as well as
the drawer sides and the inner fixed shelf.
I therefore made very small amounts of Snow White that would be for the painted area, and a mixture of Pitch Black, Driftwood, and Snow White for the stained area and for
the drawer sides.
Once the print was sealed I was able to reattach the correct track to
each drawer side.
top Gramercy Fine Linens dress a leather bed from Beau Holland Studio and are balanced by a clean, single -
drawer side table from Robuck & Co..
The paint is a perfect neutral, and
the drawer sides have a little fun color surprise!!
Attach them flush with the ends of
both drawer sides so the pocket holes are facing out, using 1» pocket hole screws and wood glue.
Glue and attach with 1 1/4» nails driven into where the edges of
the drawer sides meet the drawer face.
Measure, mark and position the drawer face so that there is approximately 1/2» space on all 4 sides of the drawer face from the edge of
the drawer sides.
• Paint FRONT of cabinet doors, drawers and
drawer sides.
Drill pocket holes for 1/2 ″ material on the outside front of
the drawer sides (remember the front of your drawer is only about 3/8 ″ -1 / 2 ″ thick because of the decorative cuts).
Drill pocket holes for 3/4 ″ material on the outside back of
the drawer sides.
Attach
the drawer sides to the drawer back with wood glue and 1 1/4 ″ pocket hole screws.
Cut a 1/4 ″ deep by 1/4 ″ wide groove into
the drawer side and back boards 1/4 ″ up from the bottom.