Sentences with phrase «drill holes in the wall»

Yes, you will have to drill holes in your walls and they will stay after you remove the baby gate, but these are negligible irritations when considering your baby's safety.

It comes with wall protecting design and separate extensions (4 and 6 inches), so you can adapt the gate to expand up to 44 inches wide without having to drill any holes in your wall, thanks to the pressure mounted attachment.

You'll need to drill holes in the wall.

Just a guy drilling holes in the wall.

I even spent a day drilling holes in the wall and installing shelves for the large number of books I assumed I would soon possess.

If you're renting and worried about drilling holes in the wall, there are even simple workarounds to ease your stress.

With inside - out tracking, the camera is on the headset, so there is no need to drill holes in a wall or set up extraneous hardware.

In the box you'll also find a roll of 3M tape if you'd prefer not to drill holes in your wall.

DISH NETWORK, Fremont, CA Junior Cable Installer, 2011 — 2014 • Accompanied the senior cable installer to site journeys and assisted in cable installation • Responded to problem calls and rectified the cabling / installation and configuration issues • Drilled holes in walls and wooden partitions to run lines through • Installed, configured and activated newly installed cabling systems • Configured broadband and DSL routers for connectivity • Installed low voltage equipment carefully using appropriate voltage adaptors

Do you have a blank spot that you would like to fill with a home decor piece but don't want the commitment of drilling holes in your wall or tile?

Next, we drilled a hole in the wall (a little smaller than the dowel) where we wanted to hang the propeller...

Not exact matches

You need to drill some holes into the door frame or into the wall (through a stud) that can be filled in later with plaster or drywall.

I'm actually excited by the thought of leaving rental life behind, of drilling permanent holes in the wall and not feeling so transient (and, if I'm being honest, what REALLY excites me is the thought of designing and building my dream closet!).

I have already messed up too many holes in the walls of our home... so I have banned myself from using the drill... for now.

Set the screws and wall anchors in the wall at the points you marked, with the screws extending out 3/8» (1 cm), and hang the crate from the holes drilled in the back of the crate.

Lenovo even drilled a hole in the kickstand, so you can hang your tablet on the wall and view movies.

If you're installing them on the wall, drill two holes in the center instead.

Then, use the holes in the plastic base to mark the drill points on the wall.

Mr. Sala drilled a hole in a concrete wall, through which could be viewed his video «If and Only If,» showing a musician playing a viola with a snail on his bow.

In these playful, environmental works, such as spinach and banana (2013), Estna arranges her paintings in various positions, tilting them against walls, hanging them, and placing them on their sides; she often extends patterns to fabrics heaped on the floor and small spheres placed on pedestals, or drills holes into canvases so that light shines through theIn these playful, environmental works, such as spinach and banana (2013), Estna arranges her paintings in various positions, tilting them against walls, hanging them, and placing them on their sides; she often extends patterns to fabrics heaped on the floor and small spheres placed on pedestals, or drills holes into canvases so that light shines through thein various positions, tilting them against walls, hanging them, and placing them on their sides; she often extends patterns to fabrics heaped on the floor and small spheres placed on pedestals, or drills holes into canvases so that light shines through them.

Amongst the many other brilliant works on show, Thomas Hirschhorn's is a standout, comprising a line - up of mannequins in a grubby display case along the back wall, lumps missing from their torsos, breasts, and necks, creating gaping holes that drill right through their bodies.

At Whitechapel, the deviant retrospective is in reverse chronological order; it has, in lieu of wall text, large Fujifilm - green strips and lingering snippets of text from the gallery's prior exhibition, Adventures of the Black Square; and its mobile walls, some of which have been flown in from a previous show in Germany, are marked with bits of masking tape, scribbled shipping instructions, and drilled holes.

In any case, unless the boreholes were made with a magic drilling rig, where the drilling head generated no heat, and no fluid or drilling mud was used to flush the drill waste from the hole, the temperatures of the exposed bore walls are useless for anything except rough indications of the local geothermal gradient.

Quite impressive, though I wouldn't go as far as to compare it with the few Tesla Model S fires (which I put in context here) because the situation is quite different, with only one cell getting relatively low - energy impacts over a small area compared to a whole battery pack getting a high - energy impact from a large piece of metal debris or a brick wall or whatever, and on top of that, in one of the fires the firefights drilled holes in the battery, which made things more spectacular than they otherwise would have been.

Like the example used by Susskind: Black & Decker sales reps, when shown one of their drills and asked if this is what they sold, were incorrect in answering «yes» when in fact what they were selling was the solution of what their customers wanted — a hole in the wall (or board).

If you have a concrete or brick wall, use the included drill bit to make your pilot holes and hammer in the included wall anchors before you drive in the screws.

If the exterior of your house is brick or masonry, you'll need to use the included drill bit to drill holes where you made marks, and then insert in the two yellow wall anchors before screwing on the mounting plate.

I don't review that many gadgets that come with a mini-spirit level, a bag of screws and a their own drill bit, but the doorbell has to be anchored in place, which means drilling a few holes to attach it to the wall or door.

For new owners, installation is pretty simple: just drill four well - placed holes where you want the doorbell to live, then use the included wall plugs and screws to fix it in place.

Performed the tasks of cutting and drilling holes in floors and walls to accommodate the passage of pipes

He drill a big hole on the wall then we pushed that special screw in.

We mounted them on the walls on each side of the bed, and like I mentioned in a previous post, I had Brian the Carpenter drill out a hole in each bedside table top so that the twisty, cloth - covered cords could drop down through them.

The organizers came with holes in the back, so I just had to drill some screws in the wall (I also used wall anchors) and hang them.

Before attaching the support pieces to the wall we used the Kreg Jig to drill 2 pocket holes in each piece for the location where we planned to use Kreg Jig screws to attach the support piece to the countertop.

That was pretty frustrating, since we had already drilled two holes in the wall.

My oldest drilled pocket holes and helped screw them into the wall, the 6 year old marked which board was for what, and placed the pocket hole screws in the holes, and my youngest sanded all the edges of all the boards.

I love older homes with their fun built ins:) There was a plug on the inside of the pantry so I drilled a hole through the wall so I could hang a CD player.